cliffwalsh Posted February 8, 2013 Share Posted February 8, 2013 Going from my revo to single stack is not easy especially the reloads. Are there any habits we get from revo shooting that work against SS shooting and reloading. I am getting pretty good with not squeezing the trigger before I get to the target. Anything else??? Link to comment Share on other sites More sharing options...
pskys2 Posted February 8, 2013 Share Posted February 8, 2013 I've found it's easier for me to practice with the 1911 trigger and then switch to my Revo than the other way. My SS shot to shot splits starts suffering fairly quickly when I focus on the Revo. I lose that short, quick slap needed for the 1911. Make sure your index finger is along the front of the mag. Then hesitate just as you insert the mag into the well. That hesitation seems to line things up better. As you practice it, it becomes almost imperceptible. Kind of like keeping the Revo trigger moving all the time, it's more of a sub conscious thing. If you have an extended mag release, watch the off hand or you'll drop a mag while firing. Link to comment Share on other sites More sharing options...
toothguy Posted February 8, 2013 Share Posted February 8, 2013 Yes, while reloading an auto I have to try to remember not to place the gun the left hand, push on the safety to release the non existent cylinder and thumb the extractor rod that isn't there. Link to comment Share on other sites More sharing options...
Waltermitty Posted February 8, 2013 Share Posted February 8, 2013 Also, give both parents a big glass of wine before you tell them you've discovered that you are Gay. Not that there's anything wrong with that. :/ Link to comment Share on other sites More sharing options...
cliffwalsh Posted February 8, 2013 Author Share Posted February 8, 2013 Also, give both parents a big glass of wine before you tell them you've discovered that you are Gay. Not that there's anything wrong with that. :/ I thought that was OUR secret. Link to comment Share on other sites More sharing options...
JimmyZip Posted February 8, 2013 Share Posted February 8, 2013 Oh My Gawd! Now I know why my mom said this stuff leads to no good! Definitely hitting the confessional on the way home tomorrow. Link to comment Share on other sites More sharing options...
mrmetalweld57 Posted February 8, 2013 Share Posted February 8, 2013 Cliff, I truly hope this response makes you chuckle. Since we disagree about the 8 shot revoes, my first thought after reading the title to your topic, was did you check with anyone in Production or L10. Just trying to make you laugh. I do respect your passion for revolvers, Ed Link to comment Share on other sites More sharing options...
cliffwalsh Posted February 8, 2013 Author Share Posted February 8, 2013 I guess I'll them next, thanks for the tip Link to comment Share on other sites More sharing options...
Waltermitty Posted February 8, 2013 Share Posted February 8, 2013 Also, give both parents a big glass of wine before you tell them you've discovered that you are Gay. Not that there's anything wrong with that. :/ I thought that was OUR secret. Link to comment Share on other sites More sharing options...
Carmoney Posted February 8, 2013 Share Posted February 8, 2013 I found it much easier to switch back and forth between revolver and auto platforms once I started keeping the revolver in my strong hand and doing the reloads with the weak hand. Link to comment Share on other sites More sharing options...
cliffwalsh Posted February 8, 2013 Author Share Posted February 8, 2013 That makes a lot of since. Not sure if that will work for me but worth a try. Link to comment Share on other sites More sharing options...
Matt Griffin Posted February 8, 2013 Share Posted February 8, 2013 (edited) My main problem is how she points. I'm in the market for an arched mainspring housing and intend to tape as much as the division allows. Other than that just tuning down the reloads to be sure about the seating and insertion points. It's hard to move slowly enough to shoot a semiauto after so much revolver. Edited February 8, 2013 by Matt Griffin Link to comment Share on other sites More sharing options...
toothguy Posted February 8, 2013 Share Posted February 8, 2013 For me I like at least a 4lb crisp trigger with a long take up. I can transition better with a trigger prep I can feel. Link to comment Share on other sites More sharing options...
lora Posted February 10, 2013 Share Posted February 10, 2013 Also, give both parents a big glass of wine before you tell them you've discovered that you are Gay. Not that there's anything wrong with that. :/ LOL, funniest thing I've read in long time. O-Lay!! Link to comment Share on other sites More sharing options...
Jaxshooter Posted February 10, 2013 Share Posted February 10, 2013 I tried real hard to switch hands with the revolver during reloading and just could never get comfortable with it. Sounds like it is a good thing I did not change. I don't seem to have a problem switching from revolver to autoloader and the other way around. Link to comment Share on other sites More sharing options...
Griz Posted February 11, 2013 Share Posted February 11, 2013 I like to draw my revolver and put my thumb on the safety. Then I close the cylinder and start shooting. Link to comment Share on other sites More sharing options...
pskys2 Posted February 11, 2013 Share Posted February 11, 2013 My main problem is how she points. I'm in the market for an arched mainspring housing and intend to tape as much as the division allows. Other than that just tuning down the reloads to be sure about the seating and insertion points. It's hard to move slowly enough to shoot a semiauto after so much revolver. Agreed after shooting Revo for a few years I had to go to an Arched MS and a short trigger on my 1911, to get it to point correctly. Link to comment Share on other sites More sharing options...
snertley Posted February 12, 2013 Share Posted February 12, 2013 When I shoot 2 of my 1911 I find the one with the arched MS housing is easyer too shoot. It point more consistantly for me. Link to comment Share on other sites More sharing options...
Rogan Posted February 12, 2013 Share Posted February 12, 2013 Cliff, when I shot the WSSS, especially after a day of revo first, I had four unintentional shots fired for the match. (all of them went into the berm, so they weren't unsafe, just earlier than i planned on shooting them) The first one was on the first stage, shooting at a small uspsa target at 20-22 yards. I got to see through the rear sight notch for about 1/20 of a second, then the 1911 was in recoil, and I instantly thought oh c*#p, don't start unintentionally discharging on the first stage... then I heard the ding and realized that I hit the darn thing and I should continue with the rest of the stage. Proved to me that using those aiming things on the gun really does work! So I have to really really concentrate on keeping my finger off the trigger until I've made that decision to fire. I'm so used to taking up the trigger and prepping the revo for the shot, that with a good 1911 trigger that has minimal take-up, short press to sear break and sub 3lb weight, I often don't recognize that I've fired the gun. So the earlier advice of keeping the finger outside the trigger guard is solid advice. I use the same grip for all handguns, so I haven't had a problem with hitting mag releases or binding cylinders. I shoot with both thumbs forward, pointing to the target, so they stay out of the way on both systems. As for the reload, I do opposite things with the two guns. As soon as the moon has cleared the revo (support hand reload with strong hand maintaining the shooting grip), the revo is pointed straight down, with the cylinder at belt level, but shooting hand elbow up. I palm the moon into the cylinder, then rotate the support hand, closing the cylinder and obtaining the firing grip at the same time. With the single stack, I do the opposite. The gun stays high in my vision as I pull it in closer to the body. I try to be able to look over my fingers on the grip and see my next target when I'm not looking the mag into the gun. Take a look at Travis Tomassie's open gun reload on you tube. It's been posted for a few years now, but it contains all the efficient movements to make a good auto reload. So to answer your question, no, the mechanics of running the two guns are different in my opinion. The other basics of shooting; sights, trigger press, follow through, grip, they all remain the same, just slightly tweaked for each weapon system based on your needs. Link to comment Share on other sites More sharing options...
cliffwalsh Posted February 12, 2013 Author Share Posted February 12, 2013 I think I'll give the arched mainspring a try. For the load, I do keep the gun up but maybe not high enough. I'll have to watch that. Link to comment Share on other sites More sharing options...
COF Posted February 12, 2013 Share Posted February 12, 2013 I call it the psychic thing - reading your palm. Put your hand in front of you where you were going to read something written on your palm. That's pretty close to where the gun should be for your reload so you can see the magwell and look past the front sight to the next target. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now