infinity38s45 Posted April 3, 2012 Share Posted April 3, 2012 hey guys i need some opinion on getting 9major with hybrid barrel , is it good idea or not, i never heard of any on that type of open pistol. does any one here know about or have a chance on shooting 9mjr with hybrid barrel. i am dieing to get one open gun.... Link to comment Share on other sites More sharing options...
gng4life Posted April 3, 2012 Share Posted April 3, 2012 As far as getting a hybrid barrel on an Open gun, that would depend on the type of comp you get, the slide weight, and the spring. I am trying to get a build together now and I am having a hard time finding a barrel. I did find a hybrid barrel so I asked my gunsmith if I could use that and he said it would be hard to get to all work together with the extra weight of the barrel. I don't know if anyone else is using a hybrid in 9Major but they probably are. I have seen quite a few in 38S since most will put holes in the hybrid portion anyway but still have to balance out the weight and everything else. As far as popple holes in a 9Major, it makes it tough to make Major but you can do it. I have both and there is a world of difference. I probably won't ever have popple holes in any 9Major guns but it's hard to say those "ever" and "never" words with this stuff. Welcome to the forum! Link to comment Share on other sites More sharing options...
OperationHitFactor Posted April 3, 2012 Share Posted April 3, 2012 A three port Schuemann hybrid barrel with no ports drilled and a good comp with a lightened slide is pretty freaking nice. The one I shot had an A-Zone comp, but I'm sure there are a few comps that might work well with that configuration. If you don't want to chop up the slide a Titanium comp would be a good choice for that set up. Link to comment Share on other sites More sharing options...
OperationHitFactor Posted April 3, 2012 Share Posted April 3, 2012 (edited) .... Edited April 4, 2012 by OperationHitFactor Link to comment Share on other sites More sharing options...
Rye Posted April 3, 2012 Share Posted April 3, 2012 I'll let the gunsmith decide. They usually know what works. It all depends where ur getting ur open built! I know Bedell use hybrid barrel with no holes and just his titanium comp. Link to comment Share on other sites More sharing options...
donnyglock Posted April 3, 2012 Share Posted April 3, 2012 I'm building a new open gun in 9mm and went with the new Akai comp. I talked to Shay and he told me to put 2 5/32 holes in the barrel. Link to comment Share on other sites More sharing options...
gng4life Posted April 4, 2012 Share Posted April 4, 2012 I'm building a new open gun in 9mm and went with the new Akai comp. I talked to Shay and he told me to put 2 5/32 holes in the barrel. Thanks Donny, that's good to know. I also bought a Shoto comp and waiting for the barrel so I can finish a build. With my other 9Major guns, I have two holes in them and it's already tough enough to make Major. I planned on getting this one without holes and see how it does. If the dot needs some taming, may go with a hole or two but I doubt it. BTW, thanks for the PM! Link to comment Share on other sites More sharing options...
infinity38s45 Posted April 4, 2012 Author Share Posted April 4, 2012 akai custom told me that it will be easy for 9mjr with hybrid barrel he design one his open gun named SHOGUN that i believe it has 3 holes from what i can see in picture on his website GNG4LIFE what powder are you using to make that pass to 9 majr???? Link to comment Share on other sites More sharing options...
al503 Posted April 4, 2012 Share Posted April 4, 2012 Shorty: without. Anything longer: go with what the builder recommends. Link to comment Share on other sites More sharing options...
BrianATL Posted April 4, 2012 Share Posted April 4, 2012 I have a commander length 9mm with two holes and a factory Trubor 5" no holes, the short gun takes .1-.2 grains more powder to make the same power factor Link to comment Share on other sites More sharing options...
infinity38s45 Posted April 4, 2012 Author Share Posted April 4, 2012 I have a commander length 9mm with two holes and a factory Trubor 5" no holes, the short gun takes .1-.2 grains more powder to make the same power factor Link to comment Share on other sites More sharing options...
infinity38s45 Posted April 4, 2012 Author Share Posted April 4, 2012 Brian, that's good, so it was'nt bad at all if you only add 1 or 2 grains of powder, thanks for that info so I guest I can go ahead and order one open soon as possible. Link to comment Share on other sites More sharing options...
gng4life Posted April 4, 2012 Share Posted April 4, 2012 I have a commander length 9mm with two holes and a factory Trubor 5" no holes, the short gun takes .1-.2 grains more powder to make the same power factor That's not always the case. I had to go up .4-.5 with HS6 to make the same PF with two holes in my full size. What powder was that and what barrel/size of holes? Link to comment Share on other sites More sharing options...
caspian guy Posted April 4, 2012 Share Posted April 4, 2012 There shouldn't be an issue with getting a 9mm major gun with a hybrid barrel to work. When I first started shooting 9mm major I simply had my .38 super rebarreled. It had a 4 port rib style hybrid barrel and it worked/works fine. Whether it is optimal or not is another question but it certainly works. Link to comment Share on other sites More sharing options...
THM7 Posted April 4, 2012 Share Posted April 4, 2012 Full size 9mm with Schuemann Hybricomp barrel and three holes. Gun was built by Matt Mclearn in Payson AZ, makes maj with MG 121 grn and 7.0 grns of Autocomp....need to bump it up to 8.1 grns of Vit 3N37 to get the same results. Gun has been absolutely reliable from day one. Link to comment Share on other sites More sharing options...
infinity38s45 Posted April 4, 2012 Author Share Posted April 4, 2012 Can you guys still reused the 9mm case, or it become swollen all the way to the rib of case Link to comment Share on other sites More sharing options...
jid2 Posted April 4, 2012 Share Posted April 4, 2012 (edited) ^^^^ Re-use. I pick them up sometimes at the range, as well as grabbing the array of 9mm brass on the ground after matches including others shooting 9mm major. 8.1gr of 3N37 must be a pretty full case. One of the local guys here runs a 9mm major with a hybrid barrel and Silhouette, no problems for him. Edited April 4, 2012 by jid2 Link to comment Share on other sites More sharing options...
chucupis Posted April 5, 2012 Share Posted April 5, 2012 (edited) my father has 4 poppleholes in a full size 9major open with a brazos thundercomp, no problems so far Best regards Edited April 5, 2012 by chucupis Link to comment Share on other sites More sharing options...
BrianATL Posted April 5, 2012 Share Posted April 5, 2012 I have a commander length 9mm with two holes and a factory Trubor 5" no holes, the short gun takes .1-.2 grains more powder to make the same power factor That's not always the case. I had to go up .4-.5 with HS6 to make the same PF with two holes in my full size. What powder was that and what barrel/size of holes? HS-6 and 3N38 Link to comment Share on other sites More sharing options...
rishii Posted April 6, 2012 Share Posted April 6, 2012 (edited) Oops wrong thread Edited April 6, 2012 by rishii Link to comment Share on other sites More sharing options...
Jaxshooter Posted April 6, 2012 Share Posted April 6, 2012 I am shooting a Limcat Flashcat in 9 mm major. It has eight barrel holes plus the comp. I make major with 7.8 gr of Silhouette with a 124 gr MG JHP or CMJ. Link to comment Share on other sites More sharing options...
sfpmb Posted April 11, 2012 Share Posted April 11, 2012 ^^^^ Re-use. I pick them up sometimes at the range, as well as grabbing the array of 9mm brass on the ground after matches including others shooting 9mm major. 8.1gr of 3N37 must be a pretty full case. One of the local guys here runs a 9mm major with a hybrid barrel and Silhouette, no problems for him. I use 8.2 3n37, 9major, one hole in barrel for major. Yes it is compressed. Mg121 1.165 oal Link to comment Share on other sites More sharing options...
T.McDevitt Posted April 16, 2012 Share Posted April 16, 2012 I use the same load in my FlashCat with Silhouette also just tried AutoComp 6.9 gr makes major not sure which one will win in the end Silhouette or AutoComp I need a little more testing. I am shooting a Limcat Flashcat in 9 mm major. It has eight barrel holes plus the comp. I make major with 7.8 gr of Silhouette with a 124 gr MG JHP or CMJ. Link to comment Share on other sites More sharing options...
infinity38s45 Posted April 18, 2012 Author Share Posted April 18, 2012 Thanks guys for all your helpful opinion, appreciate each one... Link to comment Share on other sites More sharing options...
infinity38s45 Posted April 18, 2012 Author Share Posted April 18, 2012 I have one more question, I ordered my 9major from FGW, but he don't like the idea of having a hibrid barrel for 9major bec he said it will create a really high pressure for such a small casing of 9mm,I ordered the gun with ribbed hibrid blank barrel with the gun, for intention to have it drilled later on to become hibrid, now do you guys know who does that kind of service for the barrel? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now