ogiebb Posted June 14, 2013 Share Posted June 14, 2013 Intersting to see how those finishes hold up against holster wear. P.S. How was that Rosatis ? Rosatis was awesome : )... ive been using the isonite finish for almost 4 years now in my STI's they work great Link to comment Share on other sites More sharing options...
Vanniek71 Posted July 18, 2013 Share Posted July 18, 2013 Intersting to see how those finishes hold up against holster wear. P.S. How was that Rosatis ? Rosatis was awesome : )... ive been using the isonite finish for almost 4 years now in my STI's they work great Where can you get Isonite done now? The canyon creek or whatever seems to be gone now...or at least no website. Link to comment Share on other sites More sharing options...
Guest Posted July 19, 2013 Share Posted July 19, 2013 ... Where can you get Isonite done now? The canyon creek or whatever seems to be gone now...or at least no website. If you are talking about Canyon Creek Custom Guns, Rich Dettelhouser is a BE vendor and can be found here: http://www.brianenos.com/forums/index.php?showforum=92 Link to comment Share on other sites More sharing options...
kneelingatlas Posted July 19, 2013 Share Posted July 19, 2013 Here's a crappy cell phone picture for a teaser: More to come on these two once I have some time to do more testing with loads/comps. Link to comment Share on other sites More sharing options...
bayougump Posted October 9, 2014 Share Posted October 9, 2014 My Tanfo Setup Link to comment Share on other sites More sharing options...
kneelingatlas Posted October 9, 2014 Share Posted October 9, 2014 Wow, how'd you sumble across this one up Gump?!? What the hell, I'll throw another log on the fire! (Just the large frame Tanfos ) Link to comment Share on other sites More sharing options...
pfcchambers Posted October 9, 2014 Share Posted October 9, 2014 My one limited frame two gun setup. 9 mm limited with 45 hunter slide. Link to comment Share on other sites More sharing options...
Open1215 Posted October 16, 2014 Share Posted October 16, 2014 My 2 :-) lim pro with cheeley mount. Henning trigger and egw sear/pin/hammer kit on the way. ( I hope this week or Monday) and my hunter 10mm. Henning magwell on the hunter will soon be on the lim pro. Both shoot 38 super. The 10mm hunter shoots softer then my glock 22c ! I plan to send the 6inch barrel with the lim pro to canyon creek and do an comp and V-6 :-) Till then I can shoot some 38 super out of the 6in hunter! ? Link to comment Share on other sites More sharing options...
bayougump Posted October 17, 2014 Share Posted October 17, 2014 Wow, how'd you sumble across this one up Gump?!? What the hell, I'll throw another log on the fire! (Just the large frame Tanfos ) Just browsing thru and saw this thread. I'm digging the slide cuts on some the pics of the Limited guns in here. I wonder if I could do some of the same to my Stock iii? Course easiest thing would be just get a Limited one day and build another Tanfo:-) I do like shooting Limited with my Stock III though Link to comment Share on other sites More sharing options...
Rdot84 Posted May 1, 2015 Share Posted May 1, 2015 092008 092.jpg092008 080.jpg092008 053.jpg092008 065.jpg Now they both wear Hennings front sights and the black one has the new magwell. I guess some additional pictures will have to get done KS - Your blaster in the first picture is amazingly sexy! I know this thread is old, but I had to comment on it. Link to comment Share on other sites More sharing options...
mitchiepinoy Posted January 10, 2018 Share Posted January 10, 2018 On 8/4/2010 at 2:21 AM, Skydiver said: Dave, The other part of the reason for no slide stop release is that most people play in the Limited and Open division with these guns. The gun is always kept topped off while shooting. In these divisions, a shooter's plans has gone dramatically awry if they are shooting the gun dry. I play in the Limited 10 division. Most people think I'm a masochist for playing in the L-10 without a slide stop on my Witness Match. I've discovered that with the slide stop installed, I ride my support thumb on it. Instead of the advantage of having additional recoil control, I actually end up driving the gun to the right. In theory, I can train my way out of it, but it was easier simply to not to have it there. The other side benefit for me is that I really have to plan my reloads well. Here's my baby: What magwell is that? Link to comment Share on other sites More sharing options...
JackRathert Posted April 24, 2018 Share Posted April 24, 2018 My small frame Stock 2,Stock 3 and Limited ProWoW Awesome [emoji41] Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
JackRathert Posted April 24, 2018 Share Posted April 24, 2018 Where are you guys finding these guns?No kidding [emoji106][emoji15]Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
farmrboy Posted February 19, 2019 Share Posted February 19, 2019 The only things I haven't replaced (yet) is the sear and hammer. Henning supplied all the internals and magwell, and the Scales 2.0 grips are from SSI. I polished the rails and inside of the frame and shined up the outside on the big buffer in the shop. Frerking Custom Works did the millwork on the slide. Sent from my Moto Z (2) using Tapatalk Link to comment Share on other sites More sharing options...
Open1215 Posted February 19, 2019 Share Posted February 19, 2019 My 2 :-) lim pro with cheeley mount. Henning trigger and egw sear/pin/hammer kit on the way. ( I hope this week or Monday) and my hunter 10mm. Henning magwell on the hunter will soon be on the lim pro. Both shoot 38 super. The 10mm hunter shoots softer then my glock 22c ! I plan to send the 6inch barrel with the lim pro to canyon creek and do an comp and V-6 :-) Till then I can shoot some 38 super out of the 6in hunter! ?I'll update this a bit. Lol. Sent from my SM-J727T1 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now