konkapot Posted February 16, 2010 Share Posted February 16, 2010 Called S+A to order a magwell for a single stack. Very very nice people, super friendly and informative. Their steel magwell weighs 2.9 oz. Their aluminum one weighs 0.9 oz. They do not recommend the aluminum one for high volume shooters; the lips of the magazines really chew up the inside of the magwell. Again, good people to deal with. FY42385 Link to comment Share on other sites More sharing options...
gunut Posted February 16, 2010 Share Posted February 16, 2010 always liked them had a old pair on a 45winmag grizzly Link to comment Share on other sites More sharing options...
bubbadoc Posted February 16, 2010 Share Posted February 16, 2010 Good people, good products, good prices... the perfect triple play Link to comment Share on other sites More sharing options...
Corey Posted February 16, 2010 Share Posted February 16, 2010 recently put one on my Colt...LOVE IT! Link to comment Share on other sites More sharing options...
LPatterson Posted February 16, 2010 Share Posted February 16, 2010 Using them on 2 1911's and a Para. Link to comment Share on other sites More sharing options...
G-ManBart Posted February 16, 2010 Share Posted February 16, 2010 I'd like to see them make one out of Ti, but make the well more like a medium Techwell/SV/Dawson ICE. That would be a sweet combo...but probably expensive. R, Link to comment Share on other sites More sharing options...
Steve J Posted February 16, 2010 Share Posted February 16, 2010 You can't beat a Smith & Alexander magwell, especially when professionally blended to the frame. Nothing looks or works better IMHO. These are examples of Rogers' and Caylor's work, but you can also do it at home yourself with a file if you're hardy enough (I did two) or with a Dremel if you're brave enough. Link to comment Share on other sites More sharing options...
guns_and_labs Posted February 16, 2010 Share Posted February 16, 2010 but you can also do it at home yourself with a file if you're hardy enough (I did two) or with a Dremel if you're brave enough. I still have a restraining order forbidding me to approach a Dremel, after the unfortunate "Carry Melt" incident with the Kimber. Link to comment Share on other sites More sharing options...
Corey Posted February 16, 2010 Share Posted February 16, 2010 but you can also do it at home yourself with a file if you're hardy enough (I did two) or with a Dremel if you're brave enough. I still have a restraining order forbidding me to approach a Dremel, after the unfortunate "Carry Melt" incident with the Kimber. \ Haha, further reasons i dont even want to own a dremel... I dont have mine blended yet, just installed. thinking about taking a file to it to smooth the edge out a tad. Link to comment Share on other sites More sharing options...
bbbean Posted February 16, 2010 Share Posted February 16, 2010 but you can also do it at home yourself with a file if you're hardy enough (I did two) or with a Dremel if you're brave enough. I still have a restraining order forbidding me to approach a Dremel, after the unfortunate "Carry Melt" incident with the Kimber. When I disassemble my guns, I don't worry about ammo, but I do put the Dremel in the other room. Link to comment Share on other sites More sharing options...
2MoreChains Posted February 17, 2010 Share Posted February 17, 2010 Called S+A to order a magwell for a single stack. Very very nice people, super friendly and informative. Their steel magwell weighs 2.9 oz. Their aluminum one weighs 0.9 oz. They do not recommend the aluminum one for high volume shooters; the lips of the magazines really chew up the inside of the magwell. Again, good people to deal with. FY42385 Konkapot, Thanks for posting the weights. Just curious, are those for the flat or arched magwells? I resorted to aluminum when I put my Trojan on a diet to make CDP weight, but I didn't have access to a scale at the time. OTOH, I did notice a significant weight difference when comparing the two. I was at 42 oz with a steel S&A, and your post confirms that I'm under 41 oz. so thanks for that. Incidentally, I only have a few thousand rounds thru the aluminum magwell, and it's hardly "chewed up". I'm guessing it'll last for quite a while. Link to comment Share on other sites More sharing options...
2MoreChains Posted February 17, 2010 Share Posted February 17, 2010 PS, I've graduated to hand files and emery cloth, but the Dremel stays in the garage! Link to comment Share on other sites More sharing options...
konkapot Posted February 18, 2010 Author Share Posted February 18, 2010 Two More Chains that was for flat; I didn't think to ask about arched. I can't imagine much more weight there. The "chewed up magwells" comment was interesting; I would like to have followed up but I had to get off the phone. I can only imagine what the General Shooting Public sends back to him for repair/replacement. FY42385 Link to comment Share on other sites More sharing options...
Steve J Posted February 18, 2010 Share Posted February 18, 2010 The inside of my chrome plated steel ones are pretty scraped up from hard use. 16,500 rounds now. I imagine aluminum ones would be so deeply gouged as to slow you down. I can't imagine anyone choosing an aluminum one for a gun that's going to get used alot... or even some. Link to comment Share on other sites More sharing options...
2MoreChains Posted February 18, 2010 Share Posted February 18, 2010 OK, don't worry about it. I've been meaning to get a scale anyway so I can stop guessing. Thanks! Link to comment Share on other sites More sharing options...
G-ManBart Posted February 18, 2010 Share Posted February 18, 2010 Since some of the folks reading this are in comparison mode, I figured I'd add info on one of the alternatives. A Techwell XT (large) with matching Alumagrips weighs 3.1oz exactly. Keep in mind you'll still need a mainspring housing. If you go with a Techwell and a polymer mainspring housing it's going to weigh pretty much the same as a steel S&A and wood grips would. Pretty much a wash in the weight department. You could probably take some material off the inside of the Alumagrips to save weight, if needed, and the medium sized Techwell could also save a few tenths. I shortened up my XT by maybe .200" and it looks a lot like what the mid-size does (at least in pictures). R, Link to comment Share on other sites More sharing options...
cnote Posted February 18, 2010 Share Posted February 18, 2010 Called S+A to order a magwell for a single stack. Very very nice people, super friendly and informative. Their steel magwell weighs 2.9 oz. Their aluminum one weighs 0.9 oz. They do not recommend the aluminum one for high volume shooters; the lips of the magazines really chew up the inside of the magwell. Again, good people to deal with. FY42385 Anyone know the weight of a SS Dawson ICE with the flat mainspring housing??? Link to comment Share on other sites More sharing options...
NickAument Posted February 18, 2010 Share Posted February 18, 2010 I've used them on multiple 1911's. I now use the ones made for slim grips as they look much better and work about as well as the full size. To me the std magwell is too large so i go with the slim. YMMV Link to comment Share on other sites More sharing options...
JerryKee Posted February 18, 2010 Share Posted February 18, 2010 They are great people, I remember when they use to shoot the matches too. that has been several years and split a time ago.. I sent in a ambi para mag release that I bought second hand they fixed what was wrong and sent me a kool pin to boot. I currently have one on every single stack that I own and two on my para's. J.Kee Link to comment Share on other sites More sharing options...
Steve J Posted February 18, 2010 Share Posted February 18, 2010 (edited) Anyone know the weight of a SS Dawson ICE with the flat mainspring housing??? Probably fairly light as the inside looks to be a plastic of some sort. You might ask in one of the threads started about the Dawson magwell instead of here. Edited February 18, 2010 by Steve J Link to comment Share on other sites More sharing options...
xcelr8n Posted February 18, 2010 Share Posted February 18, 2010 I have a blued S&A on a Kimber and a stainless one on a Springer. I sent the Springer into their pro shop and they did a great job blending it in for me. S&A sold me the complete assembly since I was replacing the ILS on the Springer. It's a slick deal. Link to comment Share on other sites More sharing options...
usmc1974 Posted February 19, 2010 Share Posted February 19, 2010 I have one fit to every 1911 I have. They are great. Link to comment Share on other sites More sharing options...
Duane Thomas Posted February 20, 2010 Share Posted February 20, 2010 You have to admire Alan Smith. Not only was he smart enough to invent the integral mag funnel that's a part of the mainspring housing, he was smart enough to patent the idea, and aggressive enough to sue anyone who infringes on his patent. You see other mag funnel designs, they either affix directly to the frame or, if they affix to the mainspring housing, they're a separate piece that's held to the housing with a bolt or pin. Though this is touted as "allowing you to remove the funnel for carry if you want," every person within the industry to whom I've talked, who was really in the know, laughed at that and said, "That's really to get around Alan Smith's patent." I greatly prefer the Smith & Alexander to any of the two-piece designs. AAMOF, the only mag funnel design period that eclipses the S&A in my opinion is the Heinie design that bolts or welds directly to the frame and allows installing a funnel while adding no length to the butt at all. For concealed carry, if not increasing the length of the butt is an overwhelming concern, this is probably the best way to go. OTOH, it does not escape my notice that if concealment was an overwhelming concern, we probably wouldn't be carrying a 1911 with full-length butt to start with. Link to comment Share on other sites More sharing options...
Corey Posted February 20, 2010 Share Posted February 20, 2010 You have to admire Alan Smith. Not only was he smart enough to invent the integral mag funnel that's a part of the mainspring housing, he was smart enough to patent the idea, and aggressive enough to sue anyone who infringes on his patent. You see other mag funnel designs, they either affix directly to the frame or, if they affix to the mainspring housing, they're a separate piece that's held to the housing with a bolt or pin. Though this is touted as "allowing you to remove the funnel for carry if you want," every person within the industry to whom I've talked, who was really in the know, laughed at that and said, "That's really to get around Alan Smith's patent." I greatly prefer the Smith & Alexander to any of the two-piece designs. AAMOF, the only mag funnel design period that eclipses the S&A in my opinion is the Heinie design that bolts or welds directly to the frame and allows installing a funnel while adding no length to the butt at all. For concealed carry, if not increasing the length of the butt is an overwhelming concern, this is probably the best way to go. OTOH, it does not escape my notice that if concealment was an overwhelming concern, we probably wouldn't be carrying a 1911 with full-length butt to start with. Dont patents expire after like a 10 yr period or something and after that, anyone can copy the idea? How much longer til there will be copycats in the market (not that ill buy them over the S&A-the originator deserves the credit and sale) Link to comment Share on other sites More sharing options...
Duane Thomas Posted February 20, 2010 Share Posted February 20, 2010 The next time I talk to Alan Smith, I'll ask him. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now