Cuz

Man, I just re-read this whole thread again and I still don't understand it. I think MikeB hit the nail on the head in that you probably wouldn't feel any noticeable difference in an actual match. Which will segway into the next topic I start.

I am also looking for someone to do my 43 slide for a 407k. I’m leaning towards BattleWerx because I like that the factory iron sights will give a 1/4 co-witness. Not sure if other places are the same.

Thanks, I’ve shifted gears and was leaning towards Jagerwerks or BattleWerx. There was a lot of Internet chatter recently about long lead times at Jager, so at least for this job it will probably be BattleWerx. I also have to find someone to do my P365.

Enough about the optics, let’s get back to the plates. Ricardo, you pointed out problems with a bunch, but I’d be more interested in hearing about any commercially available plates that you didn’t think sucked. It sounds like you evaluated a few different plates.

I tried searching but didn’t come up with much recent info. mom looking to get a Glock 43 slide milled for a Holosun 407k and am considering a couple of places. Just wondering if anyone has used BattleWerx recently and what they thought of the work they did. thanks.

Hello, anybody home??? Nobody has used them to mill a slide? Anyone bought one of their complete slides that come milled?

I found one in stock at Speed Shooter International and ordered it. Thanks.

I'm thinking of sending them my Glock 43 or 48 slide to have it milled for a Holosun 507K. Just wondering if anyone has had a slide milled by them and how they liked it. https://suarezinternational.com/suarez-international-holosun-507K-sight-package-on-your-glock/ Thanks, Cuz

Yeah, you have to stay on top of this stuff, it pops in/out of stock rather quickly. I did find it in stock about an hour ago at Speed Shooter International and placed an order. Thanks, Cuz

Look closer, not in stock, estimated ship time is 1-3 months.

Anyone know who has the 510c riser in stock? Can't find one anywhere.

Interested.

Bumping this for any updates. I’d like to send out my P365 slide to get it milled for a Holosun 407k. Thanks.

I think the results are still being tabulated.

I think I’ve covered it at least once in one of these “MOS” threads. I think the screws are too thin and they break too easily. I like the concept of the threaded posts. It should make for a more secure mount, but it doesn’t work out that way for me. In addition to the spare one, I currently have one on my G41 with a Holosun 507C mounted to it. I rarely shoot the gun, so I hope it will last, but I don’t have any confidence in it. But, just to show you how little I know, I did trust the Glock MOS plate over the C&H for my SRO, and that’s the one that sheared off on me. So now I’ll try the FCD plate. If that doesn’t work I’ll buy a non-MOS slide and send it off to be milled for RMR. But I’m hoping I don’t have to do that. I’d much rather spend the money on primers…

I totally understand. I had a 507c on my Brownells slide that was milled for RMR before I got an SRO and it fit fine. I don’t know why they say it, but they do. I can tell you that when the plate comes in I will try mounting my 507c on it just to check before putting the SRO on it. I’m curious, and think it may have something to do with the length of the mounting screws. But that’s just a guess.

I’m glad it works for you. I have one “like new” in my pile of spare crap that I doubt I’ll ever use. The concept is interesting for sure, but it’s not for me. I’ll give the FCD plate a try and see if I like that one better. I hope so, these parts start to add up after a while $$$.

True, but FCD goes out of their way to say they don’t guarantee their plate will work with a Holosun sight.

Thanks, I found the FCD plate in stock at Primary Arms and ordered it. I should have it ready to go by the time I get the slide back from Glock.

Just wondering how many Mfgs make an MOS plate for a Trijicon SRO? Im looking for alternatives to the C&H plate. Forward Controls Design makes one. Anyone else? Thanks.

Absolutely! I learn a lot from reading the many responses to questions other people ask. It’s the ops loss if he/she doesn’t follow up after asking a question. There will still be a lot of others that will learn from the answers provided.

https://www.bigtexordnance.com/product/high-quality-torx-screws-for-glock-mos-plates-set-of-2/

Yes, went over that in detail with Glock support. The tech said I could consider getting better quality screws then the ones provided by Glock. He said they were rated at around 100,000 psi tensile strength and should be fine under most circumstances, but he said McMaster sold some that were rated at 140,000 psi. I tried to look them up, I wasn’t sure I found the right ones, and did want to pay $7 each for them. then, I found them for $2 at Big Tex Ordnance. I never heard of them before, but took a chance since it was just a few bucks.

I like the folding stock on mine for easier portability and storage in the safe. I don’t shoot it much and am not experienced enough with precision rifle shooting to know if it helps or hurts my ability. I would not have bought it if it didn’t have the folding stock option.

Lol, I have one Gen4 G17 MOS with a Holosun sight that has never failed me. Probably because I never shoot it. That's one way to make them last forever.