Fabzz613

Glad the issue is resolved now. I feel you on the S&W customer service. Maybe Glocks are popular for a reason working at a dealer i have seen the same thing from glock

there are 3 sears comercially available from apex. the standard hard sear and 45/shield hard sear. improved geometry for cleaner break etc compatable with the stock trigger and the apex AEK trigger shoes then the FSS sear which pushes the break point further forward and then the FSS trigger or FF trigger shoes have overtravel stops built in. therefore reducing the overall trigger travel. these need the fss or FF trigger shoes to work correctly

without adding an overtravel stop decreasing the pretravel will increase your overtravel which is worse for accuracy because even with a perfect trigger pull the movement after the break will pull your sights off target

I have an rmr dual illum on my 627 with an Alchin mount that a drilled and tapped for it. I find it works well I like how low it gets the dot and I never have to turn it on or off I'm gonna get a .500 front sight as an index point for the dot

It is not manufacturing it's gun smithing which any type 1 ffl has the ability to do. In the same way as changeing sights or grips. You are selling a customer a single action revolver. They are taking possession leaving the store coming back and wanting it to be modified to shoot in double action.

I'm not sure about them if it's just for a fun gun I would say go with whoever. If it's a gun for competition send it to apex. Yeh there's gonna be a longer wait but there's a reason for that. there wait time is typically a little shorter then they quote.

Not good ones

ive seen factory 45 bullets pulled in revolvers might just have to tighten the crimp more. also if its the same brass it could be getting a little weak at gripping the bullet as brass hardens as its fired multiple times

An old school gunsmith trick was to take the side cover plate off and squirt some toothpaste in close it up and dry fire it 1000 times

ok cool i was looking at the 38 super data and was wondering if that load data was good to use i was kinda looking at the 38 special data and the super and cross referencing them the super max pressure seemed alot higher though i dont have a chrono but my friend is gonna bring one to the range on the weekend. but i work at an indoor range so i can test fire new loads easy.

ok cool that gives me an idea. going bye the hodgden website i 146gr hp out of a 7 inch test barrel min 3.5 808 fps 119pf max 4.0 914 fps 135 pf +P 4.4 981 fps 144 pf so if your getting 3.6 out of a short colt with a 5 inch i might try 4.0 in my 4 inch with mids should get me close to where i need i was using clays in special cases with the 147 and couldnt get a load to knock down the steel at my range even with .5 over max

i need some advice on a load .38 mids (.900) 147 gr xtream plated .357 dia federal primers with either clays or tightgroup powder this is shooting out of a 627 pro with a 4 inch barrel this is gonna be a load for uspsa and icore so 130-135 powerfactor hopefully

thanks dave. it looks like i found enough federal and R-P after some searching. i believe i have shot with you a couple times at SLOSA with scott and randy.

im pretty sure i was told that very early in his career he had to have surgery on a tendon in his forearm. people apparently people joke that they shortened it so he could pull the trigger faster.

Apex tactical mass driver hammer for the 617 https://apextactical.com/store/product-info.php?pid3.html

Yeh I do have a free source. And a lot of it is PMC I get hardly any remington ,thanks that's good to know. I'll just have to check them on the clips and make sure they fit well.

Anybody had experience with PMC brass. Mainly how it fits in moons compared to R-P/ Federal brass.

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=432230112 Another one currently at 1149 I wonder how high this one will go

i would like to say that at the club i shoot at the 8 shot minor rule has greatly increased revolver participation. i am lucky to live 3 miles from the hogue range that the IRC is held at each year so it may be a little bit different. up until now i have just shot semi's in uspsa i have alot of friends that shoot revolver i went out and watched them shoot at the IRC last month and i thought it was awesome even just the the friendship between everybody was great to see unlike a typical large uspsa matches . a guy i didnt even know offered to lend me everything i needed to shoot the match (except ammo) if i wanted to which i wish i took him up on it. to make a long story short i just last week ordered a 627 to shoot at next years IRC and i probably wouldn't have got one if the rules hadn't changed for uspsa because i would have had to buy two different revolvers to shoot icore and uspsa with and if i wanted to practice enough or even shoot with my uspsa friends . with that being said our icore club is almost dying because now everybody can shoot there Icore revolver in USPSA which has alwase had a larger turnout better stages ect and i believe this will also follow on to major uspsa matches. it might make it a bit tougher for icore clubs but its gonna benifit uspsa some of our recent matches stats april 44 total shooters 15 revolver /may: 40 total shooters 10 revolver so i can defiantly say this is going to be a good thing for revolver division

I just picked up my versamax synthetic. It ended up cheaper then the sportsman with all the rebates and deals. The differences are the 4 extra chokes, length of pull and stock drop and cast adjustment. The high viz front sight. Rubber over mold stock and forend and hard case.

One thing a lot of people forget when running conversions is to change your extractor the hook on the original .40 will be shorter then the 9 so it won't get as good grip on the case.

Ive found solo 1000 to have really soft recoil I have loaded up TG to the same specs and it feels like it recoils twice as hard

for all the people that like online ordering and don't like the hassle of trying to get bear creek on the phone i just wanted to let you guys know about a place i found (on these forums) that sells Bear creek bullets online and actually has them in stock. they don't have every bullet but all the most popular ones 180 .40, 230 .45, 124 & 147 9mm if there is something you cant find on his website send him an email and he could probably get it for you. www.extremeventuresnv.com they are based out of Nevada and my experience with them has been great amazing customer service the owner even called me up to offer some free sample packs of new products he was trying and just started chatting for a while. postage is reasonable and shipping is fast i would defiantly recommend checking out these guys

looking for a SS guide rod to use in a G34 gen 3. for uspsa production (and take out for idpa SSP) what do you guys recommend captured, uncaptured, extended, also what sort of springs flat wire standard. cheers

Australia dosnt have the ICS system as far as i know i got graded bye doing a classifier stage basically 3 COF'S 3 paper 2 poppers in different orders. generally these will grade you higher then you are coz there quite easy our club GM shot it and to get GM grade you need like 18 HF or so he shot 26 lol i used a diferent gun and ended shooting a C grade score when i was around low B high C when i shot the last LV 3 match i got regraded to B because there was enough GM and M grade shooters which is about where i was finishing. if you want an estimate of what your shooting at just look at where you are finishing compared to other shooters grades