rangerguy

I would call Mossberg and ask them. I just tried about 6 different high brass shells and they all worked.

I run a 40 myself. I think the mag capacity is the main reason they run 9mm. I made some minor loads for my 40 and they shoot softer than a 9mm. that's my 2 cents

The 4x4 hurt if you have to go prone but other than that there great.

Get a Mag Coupler for your Akdal 1919 mags, you will thank me later. You really only need one back up mag for your pistol as the capacity on that is high enough.

They are too long for limited but good for open.

Did it only happen once or keep happening.

If it ain't broke don't fix it.

I use 4.7gr of titegroup behind 180gr precision delta fmj OAL 1.12 out of my Glock 22 with a lone wolf barrel.

I run a slide mounted Burris FF2 on my open Glock, it's a 40 though. After 5000+ rounds I still have not had to reset the zero.

I would love to see you tell Jerry his Mossberg isn't in the same league.

I like mine.

I have a burris ff2 mounted on the dovetail on my glock 22 open gun and after 3000plus rounds I still have not had to zero it again. Next time you go out and shoot it mark your screws to see if there moving, mount and adjustment screws.

I agree, you got screwed. It is ultimately up to you to verify the gun is empty but It was wrong of him to tell you "you are good".

I have a Clark Customs on my AR. Instead of gluing it I drilled and tapped it for 3 screws and it works fine.

I use federals out of my Saiga, very accurate with the smooth bore.

7.4 power pistol, 155 gr extreme plated bullet. Shot out of my glock 22 open around 170 pf.

R&R saiga !!!!

Just got an email back from them. They told me to check the powder and the primers Didn't know they would cause a failure to feed. . Guess I'm out of luck.

I ordered 1000 Berry's plate 155gr FP. I was building a couple different loads for my open gun never had any problems with them feeding, just ejecting but I fixed that. Well any way went threw the first 1000 so I ordered another 1000. They were a new batch because the lady called me and told me there would be a wait. I get the new bullets and now I'm having FTF issues with them. I used a progressive press so I didn't change any of the die settings. Tried factory ammo and they work fine everything else runs fine. Did I get a bad batch of bullets? Not happy with having 950 rounds not to mention out 100 bucks of ammo I can't trust. What do you guys think, anyone else had this problem. Thanks for any input.

600 on a pistol, 60 on extra mags, 60 holster and mag pouches, 60 on ammo. 35 bucks to use all of them.... I'm in

Sorry I gave you some wrong info. I went to a longer OAL 1.135

Had the same problem, went to a shorter OAL 1.120. The profile of the Berry's bullets is why you have to make it a shorter OAL. About the bulge on your brass just set up the re sizing as close to the shell plate as possible and you should not have a problem. I have shot thousands of rounds of glock brass and have never used a bulgy thingy.

I was having ejection issues on my glock 22. I used a lone wolf extractor, a HRED plunger assembly and a zev tech extended ejector and switched to a wolf recoil springs (11 lbs). I replaced all these parts at once and my gun runs flawless now. I would go with a stronger recoil spring as mine is an open gun.

It has 3 pins, but no front rail or finger groves

I have an old gen 2 frame with no front rail. They won't work for me.