dvc4you

How do you know that while shooting that person is using the same amount of grip that you measured in the dynamometer?

Thanks for the advice.

I thought I was doing it wrong all this time, go figure....

Stage 1 : Dillon sizer / decaping Stage 2: EGW undersize die Stage 6: Redding competition seating die Stage 7: Lee FCD

I have been looking Into the cameras that come integrated in sun glasses like iVUE camera $139 at Amazon, but not ready to pull the trigger either, they seem to have a true POV.

I load 38supercomp and eliminated the powder check, as the case is almost full anyway.

Arizona Response built and refinished my Argentine kit. He did an excellent job.

Ok will switch to solvent. Is mineral spirits / thiner the same?

Do you think the fumes from Acetone are worse than solvent?

When wearing light clothes Keltec P3AT in 380 in my pocket in Desatis holster. Have not found anything more discrete than this for the same PF. With regards to the Zombie Apocalypse I will stick to my open gun and FN-FAL.

Doing the "vibra dance" did not work for me, I have to much stock of WSR to change primer brand.

Acetone works for me, does not affect polymer but I don't have grip tape on my guns. Cheap at Home Depot. It dries fast and the residue that is left can be brushed off.

40 F and raining in Charlotte, no snowmagedon here.

I had good luck with BBI 125gr although the avg weight is 127 gr. No lead or polymer in the comp at 172 PF. Next , will try the 115gr (118gr avg) and report back. The fact that you need less powder to achieve the same velocity is attractive to me as I have a ton of N105 that I could never use with 115 gr because the case was full before getting to the desired PF. My match load is MG 121gr behind 10.5gr of 3N38.

I have tried Blue Bullets with no lead or polymer on the compensator or popple holes. It will save you 30% over MG

Thanks, I think get it. I am relatively new to open (2 years ) and I just have one open gun which I bought in this Forum (Akai Shogun).

Excellent video, highly recommended. Now if someone could explain what a cone compensator is...

I agree with the bad case, a double charge would had blown the barrel and probably deform the slide...seen that before, infinity pistol shueman barrel, they can be broken...

Take it out, I reload 38 super comp ( no crimped primer pockets) and took it out. I ran the Dillon resizing die in the first station and EGW undersize die instead of the swagger.

The first one I had worked relatively well after some tweaking. Last one I bought, would get primers WSR hanged up on the tube entry, I used a lot of sandpaper trying to make it work. I gave up, buying an RF-100 soon.

4.9gr of N320 behind a 180 gr coated bullets produces very little recoil, you can also try Clays at your own risk. OAL 1.900.

Wonder what holster it would fit, very competitive price.

Sig P938 6+1 and extra 7 rounds magazine.

Regarding the Ed Brown ( I like the 5 " threaded that is on sale) was it too loose or required a lot of fitting?

I had good experience with BBI bullets in open so far...I used to swear by MG . Do your own experiment, you will be surprised.