redfisher

Try MBX.

Why no mention of Briley?

Actually the Caspian and Para and P9 all came out about the same time and the McCormick (STI) shortly afterwards. My first open gun was a 10mm single stack no optics which pretty quickly got converted to a 38 super SS with a PDP2. Built a caspian Hi-cap as soon as they were available.

I built a 10mm back in the early 90s that I no longer have, will those mags work "well" in a SS 40 s&w, they are probably CMs.

I don't shoot IDPA, but most people who have that issue in USPSA (of which I am one) pin or deactivate the grip safety, I much prefer to pin so the safety doesn't move which then maintains the smooth transition between the safety and the frame. jeff

Understood, wasn't really meant to be an ad. My understanding is that the OP needed build one not purchase one. BUT, I understand the perception.

Do you mean like this? Jeff

This the everglades and the Cheeley all look about the same.

Weird, I never look at thread dates until someone happens to bring it up. Read through the whole thread because I've been shooting 3n37 forever and I'm about to switch to 3n38. Only shot 3n37 from about 1992-98 with (130-135 bullets and 175PF), started shooting again two years ago and easily came up with a 115grn load that worked. bought some 3n38 just to try.

What's the new style?

So even with the blast shield you are getting a lot of stuff on the lens? jeff

Same boat, same result, found a used GANS, modifying it slightly and having Glenn at LSI build me a new one. I knew there were certain things I wanted, short flat trigger, thumb shield or shielded safeties, pinned not just deactivated beaver tail. jeff

Infinity website says if you remove the locate pins on the DPP it will work.

Building a new open gun with a DPP. Going to be a mid length with 3 popple holes. Had planned on using the Cheely mount but I'm curious about the two sided Infinity mount, it seems to push the scope back another half inch or so, though I'm not sure it comes wth a blast shield. Any feedback on this mount? Thanks jeff

like my Cheely 6" with the fluted barrel

not sure how you would do that uniformly do that.

Love my lightened Cheely 6"

I like my lightened Cheely 6"

how do you turn it down?

I just ordered a Phoenix Trinity EVO grip that looks a lot like an SVI signature. Jeff

not sure the CK $250 frame actually comes with a grip

What is the remedy for that a different link?

NitroFin fitting. Just picked up a Nitrofin and dropped it in my Cheely limited. There are no fitting instructions and the slide now sticks when closed, I can get it to open but it sticks every time it closes. What's the solution?

The one in the picture was built in 96-97. The one just out of the picture is a good bit older with a PDP 2 in a Redbuff mount. I also have a first gen caspian that I shot for a couple years before that one. My very first open gun was a single stack 10mm with Iron sights, which was pretty quickly converted to 38 super single stack w/ a PDP II

I don't reload any rifle on a Dillon, if I was shooting 3 gun maybe that would change.