Jump to content
Brian Enos's Forums... Maku mozo!

benny hill

Classifieds
  • Posts

    3,085
  • Joined

  • Last visited

Everything posted by benny hill

  1. HELL taylor, nobody wants you to find out anything. call me , I won't tell you anything but the truth. heh, heh, heh.
  2. sig lady, my wilf say's I love my gun's more than her, but i'm not sleeping with them YET.
  3. just the slide/comp area, when finished the slide weighs 10/11 oz. fast & flat. lynn will have his in about 3 wks. ask him then.
  4. had this same prob. put standard recoil spring in stock, lightened bolt up by 35%. can do 15/18 splits now & gun is waiting on me. use 3 1/4 dram 1 1/8 shot.
  5. POA at 50 yd. 2" high @100 1" high @ 200 5" low @ 300 what you see on the front sight is what you get. hold center of plate/target
  6. they were ok when the power factor was 175, but with it lowered the gun cycles very slow. most of us like a fast gun & use 165 or 180.
  7. that was supposed to be the frame for the ramp cut.
  8. larry's right on. the 165 jhp/5.1 vv320 is very flat shooting & fast cycling. like it better than the 180 load.
  9. for my personal gun [ and most of them I build] I like a 5" slide,short 3 port comp, 3 gas ports in the barrel/slide. I lighten the front of the gun & slide so it transtitions very fast. gun weighs 41 oz. slide weighs 11oz. very flat shooting
  10. I have built several of them, but all in 38 super. totally reliable w/ 115 jhp @1135 fps.
  11. zero 165 jhp/ 5.1 vv320/ 1040 fps out of my super fat free 6". very flat & very fast cycling. oal 1.175
  12. add the fet on a frame, slide & barrel. the x-tra money is for fitting the barrel & cutting the slide for the ramped barrel.
  13. send it back for good & buy a RRA or one of my custom shorty's.
  14. zero 115 jhp/ 12 gr. acc#7 / hits you in the hand , but nothing shoots flatter. been useing it for 10 yrs.
  15. I have done several of these. I charge $75.00 & leave it finished in the white. should find a local smith that would do it for that.
  16. NO kay has never had any & we don't know how to make any yet.
  17. splits dont mean squat. Use whatever spring lets the sights return to the point of aim. I usually use a 12.5 to 14# depending on the gun.
  18. have it custom built by a number of people in the buss.
  19. sounds like the feed lips are to loose at the front & follower is kicking the round up in the front to soon. lips should be .375
  20. BrianH, send me the spec's & priceing on your comp's please. thank's.361/241/1091
  21. try bore brite from brownells, works well w/o removeing the hardchrome.
  22. you are limp shouldering the gun & causeing it to short stroke while standing but not the bags were you were leaning into it. try leaning into the gun & pull it into your shoulder.
  23. try 1.150 180 fmj 4.9 vv320 makes about 168 pf
×
×
  • Create New...