RussellJohnson Posted December 7, 2009 Share Posted December 7, 2009 (edited) I am reloading 9mm, with power pistol or bullseye powder, what is the length of time that bullets with this powder can safely be stored and or the powder solidifing. Edited December 7, 2009 by RussellJohnson Link to comment Share on other sites More sharing options...
Alan550 Posted December 7, 2009 Share Posted December 7, 2009 As long as they are kept cool and dry?............indefinitely! You won't live long enough for it to "go bad". Alan~^~ Link to comment Share on other sites More sharing options...
Sarge Posted December 7, 2009 Share Posted December 7, 2009 A long, long,long,long............................................................................ .............long time. Link to comment Share on other sites More sharing options...
Pat Miles Posted December 7, 2009 Share Posted December 7, 2009 The key words are COOL and DRY! If stored in that environment they will outlast you. CYa, Pat Link to comment Share on other sites More sharing options...
Aircooled6racer Posted December 7, 2009 Share Posted December 7, 2009 Hello: I can't seem to store mine for very long since I have been shooting them up I would suggest you get some steel ammo cans from a surplus store and use that to store them in. Those ammo cans are water proof and even will hold up in a fire. I had a neighbor who stored his ammo in his garage that went up in flames. The shotgun shells went bang but all his rifle/pistol ammo was fine since they were in the ammo cans. The garage actually fell on the cans as well. Guess what they still went bang afterwords. Make sure you write what loads they are on the inside of the ammo can so you will remember. I have one can that is a mystery 9mm but I use them for my Mech-Tech Glock 9mm. Thanks, Eric Link to comment Share on other sites More sharing options...
Rennie Posted December 7, 2009 Share Posted December 7, 2009 I have been shooting some 9mm ammo my dad loaded probably 20 years ago with no failures so far. They have been stored in GI ammo cans. Rennie. Link to comment Share on other sites More sharing options...
Chills1994 Posted December 7, 2009 Share Posted December 7, 2009 Just a few tips on buying surplus ammo cans: 1. actually make sure there is a gasket inside the lid's groove and that it hasn't dry rotted, so DO open them up at the surplus store before buying them 2. when they are open, check to make sure the sides aren't dented in or out. A dented side will not engage the rubber gasket when you close the lid. Link to comment Share on other sites More sharing options...
Chris iliff Posted December 7, 2009 Share Posted December 7, 2009 What in heavens name would possess anyone to store ammo? I can't see the point. Doesn't everyone shoot it as fast as they make it? Link to comment Share on other sites More sharing options...
calishootr Posted December 9, 2009 Share Posted December 9, 2009 as long as its stored in cool/dry conditions it will last forever, I have shot some 'factory' 30-06 that had headstamps from the 1940's and it all went bang just fine I read where they found a GI .45 on one ofthe pacific islands presumably lost during the battle forthose pacific islands, the pistol was loaded with 7 rounds and the mag still functioned and the rounds went bang(out of another gun, justfor safety's sake) Link to comment Share on other sites More sharing options...
Al Capizzo Posted December 9, 2009 Share Posted December 9, 2009 I had some 9mm rounds sitting in an MTM plastic ammo box, in my non-climate controlled shop, for about 25 years. When I ran across them I shot 'em up. Ran fine. Link to comment Share on other sites More sharing options...
boz1911 Posted December 9, 2009 Share Posted December 9, 2009 I recently found some old 9 that my Dad had loaded at least 25 years ago. They all went bang, albeit they were certainlly minor. Link to comment Share on other sites More sharing options...
AriM Posted December 10, 2009 Share Posted December 10, 2009 depends on the storage method and the bullet type....you can also use a primer sealer or a small amount of bullet lube around the neck if you are ultra paranoid....if the brass tarnishes you can always tumble it and inspect every few years....50 PLUS year old surplus regularly sells on the open market....hell I even soaked a few live rounds in IOSSO once by accident...just for the hell of it I tried firing them.....even totally corroded (to the point of being green) and having been submerged in a cleaner for over 30 min....they still went bang, and were just as "accurate" as the rest of the lot.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now