kevin c Posted February 28, 2009 Share Posted February 28, 2009 Is it really worth $15 to get them? How much/what do they add to a clean trigger pull? Do they need to be tweaked further? Link to comment Share on other sites More sharing options...
VegasOPM Posted February 28, 2009 Share Posted February 28, 2009 I don't really feel any difference vs stock cups. I think that they are one of those "get rid of that last 1/2oz" mod. Link to comment Share on other sites More sharing options...
BayouSlide Posted February 28, 2009 Share Posted February 28, 2009 Less bearing surface, a little less friction...Charlie Vanek offers his own version in his triggers...wouldn't be the first/most significant mod to a trigger, every little bit helps. Curtis Link to comment Share on other sites More sharing options...
Micah Posted February 28, 2009 Share Posted February 28, 2009 They change nothing. Seriously. Link to comment Share on other sites More sharing options...
M109R Posted February 28, 2009 Share Posted February 28, 2009 They change nothing. Seriously. If the striker area is full of water it will allow the gun to fire allowing the water to bypass around to the other side of the striker. I have never needed it for sure. Link to comment Share on other sites More sharing options...
Nik Habicht Posted February 28, 2009 Share Posted February 28, 2009 Is it really worth $15 to get them? How much/what do they add to a clean trigger pull? Do they need to be tweaked further? I've used a pair and couldn't tell the difference between that gun and my other competition blasters..... Save your money..... Link to comment Share on other sites More sharing options...
kevin c Posted February 28, 2009 Author Share Posted February 28, 2009 Thanks, gents. Kinda suspected the range of replies, but it helps to ask those in the know. I'll get a set if I start my own SEAL team... Link to comment Share on other sites More sharing options...
vluc Posted February 28, 2009 Share Posted February 28, 2009 (edited) Buy a set of the regular ones, get a file, make grooves, voila! I have both and have modded a set, no difference, BUT perception is reality. If you think the gun cycles faster, then for you, it does! Edited February 28, 2009 by vluc Link to comment Share on other sites More sharing options...
RePete Posted February 28, 2009 Share Posted February 28, 2009 They change nothing. Seriously. If the striker area is full of water it will allow the gun to fire allowing the water to bypass around to the other side of the striker. I have never needed it for sure. They are designed ONLY for the G17. They add nothing except that they are easier to lose on a complete strip. Link to comment Share on other sites More sharing options...
srt205 Posted March 8, 2009 Share Posted March 8, 2009 They fit all Glock models and they allow the water to drain. Don't waste you money on them. srt205 Link to comment Share on other sites More sharing options...
Rob D Posted March 11, 2009 Share Posted March 11, 2009 (edited) I ordered two sets the night before I first read this thread. I was hoping the channels in the sides would let air pass faster during strikes and maybe help with the light strikes I'm getting every once in a while from using a reduced power striker spring. After reading I'm thinking I might as well have burned $40. I should get them this week, and I'll report any changes if they happen. Drift: I'm not that worried about it now anyway since the production interpration is pending approval. I'll actually be able to lighten my striker. Edited March 11, 2009 by Rob D Link to comment Share on other sites More sharing options...
kframe_mike Posted March 11, 2009 Share Posted March 11, 2009 I'm thinking that with some of these ultra light trigger systems,they might make a difference.Less surface area = less friction = more striker energy available to set off the primer.Just a thought,-Mike Link to comment Share on other sites More sharing options...
Viggen Posted March 11, 2009 Share Posted March 11, 2009 Sure, why not, be ready for that surprise shooting under water stage. Pass. Link to comment Share on other sites More sharing options...
MI_Packer Posted March 11, 2009 Share Posted March 11, 2009 I ordered two sets the night before I first read this thread. I was hoping the channels in the sides would let air pass faster during strikes and maybe help with the light strikes I'm getting every once in a while from using a reduced power striker spring. After reading I'm thinking I might as well have burned $40. This is along the lines of what I was thinking when I put them in my G35. More for reliability instead of a lighter trigger. Link to comment Share on other sites More sharing options...
yuthh Posted March 12, 2009 Share Posted March 12, 2009 They change nothing. Seriously. If the striker area is full of water it will allow the gun to fire allowing the water to bypass around to the other side of the striker. I have never needed it for sure. +1 Link to comment Share on other sites More sharing options...
Spray_N_Prey Posted March 12, 2009 Share Posted March 12, 2009 They change nothing. Seriously. If the striker area is full of water it will allow the gun to fire allowing the water to bypass around to the other side of the striker. I have never needed it for sure. +1 +2 Link to comment Share on other sites More sharing options...
kevin c Posted March 12, 2009 Author Share Posted March 12, 2009 They change nothing. Seriously. If the striker area is full of water it will allow the gun to fire allowing the water to bypass around to the other side of the striker. I have never needed it for sure. +1 +2 If I go back to USSA I'll get a pair. That way, if I drop my G34 in the mud, I can just rinse it off in the pond and just keep on shooting... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now