eerw Posted April 26, 2008 Share Posted April 26, 2008 I found a couple of modules on my bench..but have no idea what the dot size is they have a roman numeral four scribed into them..would that mean they are a 4MOA ?? thanks Link to comment Share on other sites More sharing options...
EZ Bagger Posted April 26, 2008 Share Posted April 26, 2008 All the current stuff is color coded. Can't wait to see that Open Cheezie Link to comment Share on other sites More sharing options...
L9X25 Posted April 26, 2008 Share Posted April 26, 2008 At the bottom, between the rows of pins, there is a colored dot. Red = 2moa Green = 4 Blue = 6 Yellow = 8 Orange = 12 Purple = 16 Link to comment Share on other sites More sharing options...
eerw Posted April 26, 2008 Author Share Posted April 26, 2008 thanks.. unfortunately..no colored dot on the module.. Link to comment Share on other sites More sharing options...
shred Posted April 27, 2008 Share Posted April 27, 2008 No colored dot on older modules usually means '8', but sometimes they can be other. Well, even sometimes the color-coded ones can vary a bit in size... Link to comment Share on other sites More sharing options...
recardoa Posted May 1, 2008 Share Posted May 1, 2008 Sorry to jack your thread, but does anyone know of a hard cover for the C-More sight itself? There were no posts to my thread on the subject matter. recardoa Link to comment Share on other sites More sharing options...
aaronjbush12 Posted May 1, 2008 Share Posted May 1, 2008 does taking it out change the point of impact?? Link to comment Share on other sites More sharing options...
outerlimits Posted May 1, 2008 Share Posted May 1, 2008 does taking it out change the point of impact?? aaron-it certainly can. tolerances being what they are, i've swapped out a few over time and it does change, not significantly, but definitely worth re-zeroing. Link to comment Share on other sites More sharing options...
XD Niner Posted May 2, 2008 Share Posted May 2, 2008 (edited) I swapped out a 6 MOA for a 4 MOA on Wednesday. When I finished, the POI was about 1" to the right and about 1.5" low at 17 yards compared to the previous zero. If I had needed to do so during a match it would have been fine. As it was, I quickly re-zeroed the sight and went on with my practice. Edited May 2, 2008 by XD Niner Link to comment Share on other sites More sharing options...
shred Posted May 2, 2008 Share Posted May 2, 2008 I've only had one pair (out of maybe 8 modules) that zero to the same spot.. the rest vary by several inches at 15 yards. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now