RogerT Posted April 23, 2008 Share Posted April 23, 2008 Hi. Found this gun on a gun shops web page, it's been unsold since 2004 if I understand things right. I know 10 mm is an unusual calibre today but the gun could probably be rebarrelled to something more usable, like .45 or 9x19mm? But first of all, is it worth the asking price of 600 USD? I really don't have a clue about Springfield Armory's quality or what a mod 1911-A1 gun is good for. Link to comment Share on other sites More sharing options...
G-ManBart Posted April 23, 2008 Share Posted April 23, 2008 I'd say it's worth $600. Springfield Armory 1911s are well made guns, so I wouldn't worry about that at all. 10mm in an auto is a neat combination. Lots of power! Link to comment Share on other sites More sharing options...
HSMITH Posted April 23, 2008 Share Posted April 23, 2008 I'd put an Aftec in it and run long loaded 40. Link to comment Share on other sites More sharing options...
JakeMartens Posted April 24, 2008 Share Posted April 24, 2008 Blue Book says that this was a new model in 1990... my blue book is the 21st edition ( 2001) but I have not seen alot of these out there, anywhere, I would say $600 is a decent price. Compared to a plain jane Mil Spec they have now for around $550, plus being a limited model (sure they didn't make a bunch of 10mm) Link to comment Share on other sites More sharing options...
Michael Carlin Posted April 24, 2008 Share Posted April 24, 2008 I beg of you to leave it a ten, buy it and shoot it! Ten is far from moribund, and is a great cartridge. Link to comment Share on other sites More sharing options...
Joe D Posted April 24, 2008 Share Posted April 24, 2008 IMO it is not a good buy. First of all it is nothing more than a Gov't Model in 10mm. You will have to do a lot to make it equal in features to a basic Kimber. 10mm brass is hard to find free and expensive to buy new. Link to comment Share on other sites More sharing options...
Flexmoney Posted April 24, 2008 Share Posted April 24, 2008 It's probably a fair price if that is exactly what you are looking for. It's no deal to buy as "a steal of a price". Link to comment Share on other sites More sharing options...
Jim Watson Posted April 24, 2008 Share Posted April 24, 2008 Sorry, Joe, Springfield 10mms were internally much different from Government Model .45s. They used the Peter Stahl cam track locking and a three lug barrel. Maybe not in all, but I would not buy that gun with the intent of rebarrelling it. Not without taking it apart to see if it were mechanically 1911 or Something Else. Actually, I would not buy it at all. I don't want a 10mm and converting it to something more common would run the cost WAY up. Link to comment Share on other sites More sharing options...
jhgtyre Posted April 24, 2008 Share Posted April 24, 2008 Sorry, Joe, Springfield 10mms were internally much different from Government Model .45s.They used the Peter Stahl cam track locking and a three lug barrel. Maybe not in all, but I would not buy that gun with the intent of rebarrelling it. Not without taking it apart to see if it were mechanically 1911 or Something Else. Actually, I would not buy it at all. I don't want a 10mm and converting it to something more common would run the cost WAY up. I've handled the Omega 10mm that has the Peter Stahl guts and it didn't look like the gun in his picture. I found a link to a page with the Omega -ld Link to comment Share on other sites More sharing options...
Gary1911A1 Posted April 24, 2008 Share Posted April 24, 2008 Sorry, Joe, Springfield 10mms were internally much different from Government Model .45s.They used the Peter Stahl cam track locking and a three lug barrel. Maybe not in all, but I would not buy that gun with the intent of rebarrelling it. Not without taking it apart to see if it were mechanically 1911 or Something Else. Actually, I would not buy it at all. I don't want a 10mm and converting it to something more common would run the cost WAY up. They called it the "Linkless" and it held the barrel and slide together for a longer period of time. Sorrry, it's not just another 10MM Gov't Model. I'ld buy it for $600 and consider it a good deal. Link to comment Share on other sites More sharing options...
UW Mitch Posted April 24, 2008 Share Posted April 24, 2008 If it's been sitting in a gun shop at that price for a long time, see if they'll take less. 10mm is fun to shoot. Hopefully you reload, so you don't break the bank just in ammo cost. I almost bought an Omega once, but the manager said to shoot it on the range a box or two. I couldn't get it to run right - the double extractor was neat, but just didn't quite work on that particular gun. If what's in the shop is a "normal" Govt style 1911, it should be good to go! ~Mitch Link to comment Share on other sites More sharing options...
RIIID Posted April 24, 2008 Share Posted April 24, 2008 By the looks of the slide, it appears that the original caliber markings were milled out. My guess would be it was converted to a 10mm. I wouldn't go $600 for it. Rich Link to comment Share on other sites More sharing options...
Michael Carlin Posted April 25, 2008 Share Posted April 25, 2008 If it's been sitting in a gun shop at that price for a long time, see if they'll take less. 10mm is fun to shoot. Hopefully you reload, so you don't break the bank just in ammo cost. I almost bought an Omega once, but the manager said to shoot it on the range a box or two. I couldn't get it to run right - the double extractor was neat, but just didn't quite work on that particular gun. If what's in the shop is a "normal" Govt style 1911, it should be good to go! ~Mitch Mitch, I put a Peter Stahl Omega on a Springfield frame, fitted it up myself. The gun was incredibly accurate, but I could not get the magic twin extractors to work reliably and eventually sold it to someone who thought it neat. I really like 10mm! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now