ERIC Posted April 1, 2008 Share Posted April 1, 2008 Since Defensive Edge no longer does this modification, we are left to fend for ourselves. My latch is pretty loose after 5 years of shooting and started causing problems. Instead of installing a thicker retaining clip, I thought I’d try doing the modification myself. Does anyone have a parts list of what’s needed for this so I don’t have to do a trial and error at the hardware store? Also, does anyone know the exact location on the receiver to drill out the old latch retainer stud (with respect to the trigger assembly holes)? Link to comment Share on other sites More sharing options...
cking Posted April 1, 2008 Share Posted April 1, 2008 buy a new latch, and package of three thickness clips from brownells, clean up the new latch sharp edges, install with a little play and forget about it. Easy, cheap, fast Link to comment Share on other sites More sharing options...
jobob Posted April 1, 2008 Share Posted April 1, 2008 buy a new latch, and package of three thickness clips from brownells, clean up the new latch sharp edges, install with a little play and forget about it. Easy, cheap, fast That's the easy, cheap way. Who wants to do that, when you can drill on your gun and maybe have to buy a new receiver? Link to comment Share on other sites More sharing options...
ERIC Posted April 1, 2008 Author Share Posted April 1, 2008 I've already taken a mill to the receiver and openned up the loading area. A little more milling won't hurt. Link to comment Share on other sites More sharing options...
jobob Posted April 1, 2008 Share Posted April 1, 2008 A mill is WAY too precise, nearly professional even. Dremel is the way to go! Link to comment Share on other sites More sharing options...
j2fast Posted April 1, 2008 Share Posted April 1, 2008 A mill is WAY too precise, nearly professional even. Dremel is the way to go! jobob really wants to be a bad influence on someone...... Link to comment Share on other sites More sharing options...
rz317 Posted April 2, 2008 Share Posted April 2, 2008 Since Defensive Edge no longer does this modification, we are left to fend for ourselves. My latch is pretty loose after 5 years of shooting and started causing problems. Instead of installing a thicker retaining clip, I thought I’d try doing the modification myself. Does anyone have a parts list of what’s needed for this so I don’t have to do a trial and error at the hardware store? Also, does anyone know the exact location on the receiver to drill out the old latch retainer stud (with respect to the trigger assembly holes)? ERIC, I have been wondering about this myself. It is my understanding that the bushing used is the only non-hardware store part in the DE interceptor mod. I'm curious to hear if anyone has had success with a similar mod using common hardware. If there is anyone out there that has an 1100 or 11-87 with the real-deal DE mod, that could give us the specs on the bushing, we'd sure appreciate it. Ryan Zamberlan Link to comment Share on other sites More sharing options...
jobob Posted April 2, 2008 Share Posted April 2, 2008 Since Defensive Edge no longer does this modification, we are left to fend for ourselves. My latch is pretty loose after 5 years of shooting and started causing problems. Instead of installing a thicker retaining clip, I thought I’d try doing the modification myself. Does anyone have a parts list of what’s needed for this so I don’t have to do a trial and error at the hardware store? Also, does anyone know the exact location on the receiver to drill out the old latch retainer stud (with respect to the trigger assembly holes)? ERIC, I have been wondering about this myself. It is my understanding that the bushing used is the only non-hardware store part in the DE interceptor mod. I'm curious to hear if anyone has had success with a similar mod using common hardware. If there is anyone out there that has an 1100 or 11-87 with the real-deal DE mod, that could give us the specs on the bushing, we'd sure appreciate it. Ryan Zamberlan I have both, but what you propose would entail taking apart my guns. I know my way aroung Glocks, 1911s, and ARs, but I don't feel confident with shotguns. Maybe because I just don't like shotguns a lot and don't spend a lot of time with them. With matches coming up I'd hate to show up at Shawn's shop with a box of parts and beg him to fix it! Link to comment Share on other sites More sharing options...
ERIC Posted April 2, 2008 Author Share Posted April 2, 2008 Jobob, if you don't feel confortable taking it apart, for god's sake, don't do it. Nobody would want you stuck with an unusable shotgun. I e-mailed Shawn last week to see if he could help but haven't heard back from him. I'm sure he's pretty busy. Link to comment Share on other sites More sharing options...
jobob Posted April 2, 2008 Share Posted April 2, 2008 He IS busy. I was at his shop about a month ago to do some needed tweeking on my 1100 that he had worked on. So he will fix guns he worked on earlier, but he told me that he just doesn't have time to do anything but MORs now. He said also that he didn't know anyone who would do the Remington mods he use to do. So, we're back to a Dremel (or mill if you prefer such finery) to enlarge the loading port, and replacing the interceptor latch periodically. Link to comment Share on other sites More sharing options...
wide45 Posted October 23, 2008 Share Posted October 23, 2008 I have an 1100 with a broken interceptor latch stud. Is anyone selling the parts to fix this? Link to comment Share on other sites More sharing options...
Flexmoney Posted October 23, 2008 Share Posted October 23, 2008 Anybody try a search, I thought a bunch of this stuff was on the forum already? Maybe not as detailed as needed? Link to comment Share on other sites More sharing options...
outerlimits Posted October 23, 2008 Share Posted October 23, 2008 i talked to shawn at the R&R match in july about this. he said he's trying to show one of his folks how to do it and never got around to configuring a "kit" for the fix. Link to comment Share on other sites More sharing options...
wide45 Posted October 24, 2008 Share Posted October 24, 2008 Found the pictures. http://www.brianenos.com/forums/index.php?...st&p=187819 Link to comment Share on other sites More sharing options...
wide45 Posted December 7, 2008 Share Posted December 7, 2008 Done. Hard part was replacing the spring. Bushing is a tiny part. Can be made without a lathe, if you only make one or two. Link to comment Share on other sites More sharing options...
Tom D. Posted December 10, 2008 Share Posted December 10, 2008 I am really surprised that some other enterprising'smith hasn't started doing the interceptor latch mods now that DE isn't. I was fortunate to get my 1100 done before he went exclusively to rifles. Link to comment Share on other sites More sharing options...
Bryan 45 Posted December 10, 2008 Share Posted December 10, 2008 I just picked up an 1187 because I like guns. Is the interceptor latch mod something that typically only needs done after several thousand rounds and things start to get loose? Link to comment Share on other sites More sharing options...
StealthyBlagga Posted December 10, 2008 Share Posted December 10, 2008 I just picked up an 1187 because I like guns. Is the interceptor latch mod something that typically only needs done after several thousand rounds and things start to get loose? On some guns the interceptor latch can work loose due to wear on the stud machined into the receiver. A loose latch can cause function problems. The immediate fix is to replace the standard circlip with a thicker one, and a kit of circlips of different thicknesses is available for cheap from Brownells. The interceptor latch mod is something I probably would not attempt unless the Brownells kit was insufficient. With the above said, I have been running an 11-87 in practical shotgun and 3-gun competition since 1996. At that time, I bought it used... the gun was made in 1994. This gun has a lot of mileage, and it still runs well. Other stuff has worn out, but the interceptor latch has not thus far been a point of failure. Indeed, the world is full of very high mileage 1100s and 11-87s used as loaners at trap and skeet clubs, and they are chosen because they are cheap and long lasting. YMMV, but I would not lose too much sleep over this unless/until you have a problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now