sslav Posted November 12, 2007 Share Posted November 12, 2007 I have a G-35 with with a RS trigger kit + Wolf Connector + Original Glock trigger spring and a 13 ISMI recoil spring. I've been running this setup for about 4-5 months and have had it for about 5-6 months before that with a Glock 3.5lb connector. Recently I started having occasional reset problems. When it first started occurring I had replaced my trigger spring with a new one. This one has no more than 400-500 rounds on it. Yesterday I had shot a local match - five stages and about 150 rounds or so. Gun ran fine most of the day but on one stage I had a failure to reset - twice on two consecutive shots. I am at a real loss at how to trace this problem. The problem is so rare that it is nearly impossible to judge if a part swap has any effect. Link to comment Share on other sites More sharing options...
HK Dan Posted November 12, 2007 Share Posted November 12, 2007 Are you sure that your trigger srping isn't broken? This would be an exact description of the symptoms. Link to comment Share on other sites More sharing options...
Micah Posted November 12, 2007 Share Posted November 12, 2007 Have you done anything to your striker spring lately? Cutting coils reduces the force that your trigger will reset and may effect reliability. Link to comment Share on other sites More sharing options...
DrShooter Posted November 12, 2007 Share Posted November 12, 2007 I had the same problem with the reset not happening or taking .5 second to happen. I replaced the striker-safety spring (that works the button in the slide). When it gets weak, the reset doesn't happen correctly. Worked for me. Link to comment Share on other sites More sharing options...
sslav Posted November 12, 2007 Author Share Posted November 12, 2007 Thanks for responses everyone. I am sure the trigger spring is not broken. I checked it right after the stage when I had the problem and it is fine. I have not adjusted the striker spring at all, however I have not replaced it in a while - probably 10K+ rounds Same with the striker safety spring - no adjustments since installation but have not been replaced in over 10K rounds. Both of these came with RS trigger kit. I suppose I should start with one of these two springs and replace it with OEM. If the problem still occurs I'll go with the other one. The only difficulty is that since the problem is intermittent, I can not know for sure that it is fixed. Slav Link to comment Share on other sites More sharing options...
BlackBuzzard Posted November 12, 2007 Share Posted November 12, 2007 Sounds sort of like the issue I had.......heres the thread. http://www.brianenos.com/forums/index.php?...mp;#entry632340 BB Link to comment Share on other sites More sharing options...
BayouSlide Posted November 13, 2007 Share Posted November 13, 2007 (edited) I started having similar problems with a RS trigger kit a while back and spring changes didn't solve the problem. I had about one year's use on the trigger. Changed to a Vanek kit and chalked it off to parts wear. YMMV. Curtis Edited November 13, 2007 by BayouSlide Link to comment Share on other sites More sharing options...
mwx40x40 Posted November 13, 2007 Share Posted November 13, 2007 I too, had a similar problem with the RS kit. I was told to clean the striker channel. Link to comment Share on other sites More sharing options...
the duck of death Posted November 13, 2007 Share Posted November 13, 2007 The trigger spring is in the shape of an S, when replaced the S should face down. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now