jmorris Posted April 5, 2018 Share Posted April 5, 2018 I have never found it an issue personally but there are a number of folks that just hate the fact that the 650 always feeds primers. Anyway I recently got a 3D printer and looking around thingiverse.com for things I could print off and this one looked pretty neat. https://www.youtube.com/watch?v=jZDT63UZVVE&app=desktop Link to comment Share on other sites More sharing options...
stick Posted April 5, 2018 Share Posted April 5, 2018 A guy on Ebay sells them for $24.95. I have one and it works great https://www.ebay.com/itm/Dillon-Primer-stop-switch-for-XL-650/322799654353?epid=1538024197&hash=item4b285bd5d1:g:UgUAAOSwmFpZseCB Link to comment Share on other sites More sharing options...
RiggerJJ Posted April 5, 2018 Share Posted April 5, 2018 I just pull the primer advance arm's spring...quick and easy Link to comment Share on other sites More sharing options...
michael.flitcraft Posted April 5, 2018 Share Posted April 5, 2018 I just unbolt the cam. Takes 5 seconds, impossible to put back on wrong/stretch.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
pete627 Posted April 6, 2018 Share Posted April 6, 2018 I just picked one up (last week) on EBay from snoshooze (Mark Richardson ... a member on this forum) and I gotta say IMHO ... this is one of the best modifications I have made to my 650. I used to slide a little shoe under the primer arm to stop the primers ... but ... this thing ... heck ... you just snap it forward or backward. When I start a fresh run I don't operated it until the first piece of brass is under the resizing die ... has really cut down on the number of primers sitting in the ski jump parking lot at end-batch cleanup. This one (from the OP) looks like it will get the job done too w/o any drama. I used to hate to put that little shoe in and take it out ... worse than trying to get a hold of shell plate pins. Link to comment Share on other sites More sharing options...
Smitty79 Posted April 6, 2018 Share Posted April 6, 2018 I need to get one of these. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted April 6, 2018 Share Posted April 6, 2018 On 4/5/2018 at 8:56 AM, michael.flitcraft said: I just unbolt the cam. Takes 5 seconds, impossible to put back on backwards. Why unbolt? Anytime you dont want a primer fed, just lift the metal ratcheting arm upward until it’s clear of the primer wheel with your fingertip. No need to unbolt anything, or 3D print things. Link to comment Share on other sites More sharing options...
michael.flitcraft Posted April 6, 2018 Share Posted April 6, 2018 Looked for the easiest in my face solution :-)I never claimed to be the brightest fellow out there for a reasonSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Banacek Posted April 6, 2018 Share Posted April 6, 2018 On 4/5/2018 at 8:45 AM, stick said: A guy on Ebay sells them for $24.95. I have one and it works great https://www.ebay.com/itm/Dillon-Primer-stop-switch-for-XL-650/322799654353?epid=1538024197&hash=item4b285bd5d1:g:UgUAAOSwmFpZseCB I love this thing! I know I can JUST unbolt it but after 100s of times of having a indexing issue, this is worth the money to me! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now