Dirtchevy841 Posted October 24, 2017 Share Posted October 24, 2017 Looking for recipes for titegroup with 180 g coated bullet oal needs to be 1.15 or under a little. Cannot use oal over 1.15. Link to comment Share on other sites More sharing options...
kujo929 Posted October 24, 2017 Share Posted October 24, 2017 For major probably around 4.0 and adjust as needed. I used 4.2 but used a lot longer OALSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Badluck2 Posted October 24, 2017 Share Posted October 24, 2017 I have been using Titegroup for 4 years and love it. I use it for 9mm and 40 S&W. Here is my 40 recipe. 200gr Black bullets inter. 3.8 gr Titegroup Winchester primers OAL 1.13 Hope this helps . If your running 180gr then bump up to 4.0-4.2 gr like kujo929 is saying. Link to comment Share on other sites More sharing options...
Postal Bob Posted October 24, 2017 Share Posted October 24, 2017 10 hours ago, kujo929 said: For major probably around 4.0 and adjust as needed. I used 4.2 but used a lot longer OAL Sent from my iPhone using Tapatalk Same here. I use 4.2 gr at 1.185". So starting at 4 gr with the shorter oal is a good start. Link to comment Share on other sites More sharing options...
joshxdm9 Posted October 24, 2017 Share Posted October 24, 2017 19 hours ago, kujo929 said: For major probably around 4.0 and adjust as needed. I used 4.2 but used a lot longer OAL Sent from my iPhone using Tapatalk Same here ... 180 bayou with 4.0 titegroup loaded a hair long for STI Link to comment Share on other sites More sharing options...
DesertTortoise Posted October 25, 2017 Share Posted October 25, 2017 180 grain blue bullet over 4.37 gr. Titegroup (4.37 was the average from 10 throws) 1.135 length From a tanfo limited Link to comment Share on other sites More sharing options...
Dirtchevy841 Posted October 26, 2017 Author Share Posted October 26, 2017 Thanks all. Great info Link to comment Share on other sites More sharing options...
Dutchman195 Posted November 12, 2017 Share Posted November 12, 2017 (edited) I would go 4.2 with TG and it'll probably come in at around a 167-170 PF Edit: If you need, PM me I have various load data for Bayou Bullets 180s and TG powder. Can Google Doc it to you. Edited November 12, 2017 by Dutchman195 Link to comment Share on other sites More sharing options...
rowdyb Posted November 15, 2017 Share Posted November 15, 2017 4.2gr vote for that as well Link to comment Share on other sites More sharing options...
HCH Posted November 17, 2017 Share Posted November 17, 2017 I load 4.0 with a 180 lead @ 1.140 in my Paras. Link to comment Share on other sites More sharing options...
ARMAGEDON Posted December 3, 2017 Share Posted December 3, 2017 With a coated bullet from SNS casting using Titegroup at 1.15 what will be the powder load? 200gr and 180gr Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now