IGOTGLOCKED Posted October 9, 2017 Share Posted October 9, 2017 For those of you who use walnut media, do you find the large or small grit does a better job? Thx! Link to comment Share on other sites More sharing options...
Banacek Posted October 9, 2017 Share Posted October 9, 2017 I like the larger media. It leaves less residue on the cases and in my opinion it polishes the cases better but if you are into depriming before tumbling you will end up with it getting caught in the primer pocket. I also like the larger corn cob media, whatever is on sale. I did try the lizard litter since I could find it locally but that is too fine and I used it quickly to get rid of it. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted October 9, 2017 Share Posted October 9, 2017 (edited) I still use petco-sourced lizard bedding (finely crushed walnuts) and I’m entirely happy with the stuff. A couple of used dryer sheets tossed into ever load in the tumbler keep the dust from really even being noticeable. Edited October 9, 2017 by MemphisMechanic Link to comment Share on other sites More sharing options...
wrench459 Posted October 9, 2017 Share Posted October 9, 2017 1 hour ago, MemphisMechanic said: I still use petco-sourced lizard bedding (finely crushed walnuts) and I’m entirely happy with the stuff. Yep same here. Link to comment Share on other sites More sharing options...
zzt Posted October 9, 2017 Share Posted October 9, 2017 been there-done that. I now use nothing but whole grain white rice treated with a couple of drops of Dillon Case Polish. Brass comes out squeaky clean and there is no dust. The rice seems to last forever. Link to comment Share on other sites More sharing options...
191138sc Posted October 10, 2017 Share Posted October 10, 2017 I use a 50/50 combo of fine grain walnut and corn. I do not deprime to avoid media from entering the primer pocket. With a little care you can avoid the dredded "dust" and the cases come out shinny clean after about 1 hour of tumbling. I do not use any other additive to the media. The interior of the cases do not get cleaned as in wet tumbling but even after 10 reloadings I have not had one instance of trouble. Link to comment Share on other sites More sharing options...
IGOTGLOCKED Posted October 10, 2017 Author Share Posted October 10, 2017 15 hours ago, MemphisMechanic said: I still use petco-sourced lizard bedding (finely crushed walnuts) and I’m entirely happy with the stuff. A couple of used dryer sheets tossed into ever load in the tumbler keep the dust from really even being noticeable. Thanks Memphis, never had any dust issues with anything except some WM corn cob... Cheers! Link to comment Share on other sites More sharing options...
IGOTGLOCKED Posted October 10, 2017 Author Share Posted October 10, 2017 13 hours ago, zzt said: been there-done that. I now use nothing but whole grain white rice treated with a couple of drops of Dillon Case Polish. Brass comes out squeaky clean and there is no dust. The rice seems to last forever. Now that is interesting! About how many rounds do you get from a batch until you have to change it? Link to comment Share on other sites More sharing options...
IGOTGLOCKED Posted October 10, 2017 Author Share Posted October 10, 2017 Has anyone else tried white rice?? Link to comment Share on other sites More sharing options...
zzt Posted October 10, 2017 Share Posted October 10, 2017 I found out about white rice from a poster on these forums. He tried all the usual media and reported on how many cases it cleaned. The rice won by a mile. I am still using the first batch I put in, so I don't yet know how long it will last. All I can say is it is black, but not breaking down. It still cleans like when it was first put in, and it still generates no dust. I've been using it for 6 months and run somewhere between 3000 and 4000 45 and 40 cases through it. I never got anywhere near that with corncob or walnut. The rice makes the case shinier than either coarse or fine walnut does, but not quite as shiny as brand new corn cob media. Try some. It's cheap. I paid $8 for a big bag of it from Amazon (Nigiri brand). I have about 2/3 left. Link to comment Share on other sites More sharing options...
Sarge Posted October 10, 2017 Share Posted October 10, 2017 I tried rice as well. Didn’t cut it for my standards. Fresh walnut cleans much faster, but as zzt says, brass doesn’t shine as well with rice compared to corn cob. I just like clean shiny brass though. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted October 10, 2017 Share Posted October 10, 2017 (edited) Yeah I don’t care how shiny my brass is. At all. The mission is to get it in good enough shape to load cleanly and smoothly feed in the gun. Doesn’t bother me at all if it’s dingy and dull. As long as it’s smooth. Edited October 10, 2017 by MemphisMechanic Link to comment Share on other sites More sharing options...
IGOTGLOCKED Posted October 10, 2017 Author Share Posted October 10, 2017 I cleaned about 15,000 rounds with my last batch of corn/walnut before I changed it this morning. Don't know how that compares to others? I still have my first cleaner (an FA) so I think I'll try an experiment with it using rice just to see... I like 'em shiny too Sarge. Shiny is clean and clean is smooth... Cheers! Link to comment Share on other sites More sharing options...
R1_Demon Posted October 10, 2017 Share Posted October 10, 2017 23 hours ago, MemphisMechanic said: I still use petco-sourced lizard bedding (finely crushed walnuts) and I’m entirely happy with the stuff. A couple of used dryer sheets tossed into ever load in the tumbler keep the dust from really even being noticeable. MM - Just think of all those poor lizards you are depriving of a bed. LOL!!!! Good idea with the dryer sheet though. I'll have to remember that when I finally get a darn tumbler and media to clean brass in. :-D Link to comment Share on other sites More sharing options...
IGOTGLOCKED Posted October 10, 2017 Author Share Posted October 10, 2017 7 minutes ago, R1_Demon said: MM - Just think of all those poor lizards you are depriving of a bed. LOL!!!! Good idea with the dryer sheet though. I'll have to remember that when I finally get a darn tumbler and media to clean brass in. :-D I've seen reloading set ups in what was the hall/coat closet, anything to start... Link to comment Share on other sites More sharing options...
R1_Demon Posted October 10, 2017 Share Posted October 10, 2017 7 minutes ago, IGOTGLOCKED said: I've seen reloading set ups in what was the hall/coat closet, anything to start... In other words...like my portable bench I bought and work off of. LOL Link to comment Share on other sites More sharing options...
IGOTGLOCKED Posted October 10, 2017 Author Share Posted October 10, 2017 3 minutes ago, R1_Demon said: In other words...like my portable bench I bought and work off of. LOL Bingo! And you can clean on your front or back porch even if not covered in good weather. Perhaps even your attic? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now