ARMAGEDON Posted May 23, 2017 Share Posted May 23, 2017 Have an idea on the price? Link to comment Share on other sites More sharing options...
ARMAGEDON Posted May 23, 2017 Share Posted May 23, 2017 And colors? Link to comment Share on other sites More sharing options...
blfuller Posted May 25, 2017 Share Posted May 25, 2017 Are these printed from a 3D printer? Link to comment Share on other sites More sharing options...
dopeman Posted May 26, 2017 Share Posted May 26, 2017 Are they making some for witness elite match guns too? Link to comment Share on other sites More sharing options...
PatriotDefense Posted May 27, 2017 Share Posted May 27, 2017 On 5/23/2017 at 1:38 PM, ARMAGEDON said: Have an idea on the price? Somewhere around the $30-$35 range for the polymer version. The aluminum version will be priced competitively for what's currently available on the market. On 5/23/2017 at 1:38 PM, ARMAGEDON said: And colors? Possibly, still not sure how long I'll produce the polymer version for. These are more or less to hold you guys over a bit longer so I can get the CNC grips finalized. On 5/25/2017 at 3:22 PM, blfuller said: Are these printed from a 3D printer? Polymer will be..... looked at injection molding and a set of dies cost $15,000. There's no way I could keep the cost go if dropping that much money on just a set of does.... 14 hours ago, dopeman said: Are they making some for witness elite match guns too? Not messing with the round trigger guard guns at the moment. Link to comment Share on other sites More sharing options...
Jezz Posted June 1, 2017 Share Posted June 1, 2017 any chance some of these grip designs will be available for small frames? Link to comment Share on other sites More sharing options...
PatriotDefense Posted June 1, 2017 Share Posted June 1, 2017 7 hours ago, Jezz said: any chance some of these grip designs will be available for small frames? Stay up to date here" http://forums.brianenos.com/index.php?/forum/314-patriot-defense/ " for Grip announcements........ and yes we're currently working on Small Frame Tanfo and CZ platforms. Pre-order should open up this evening for the large frame polymer version of the grip. Link to comment Share on other sites More sharing options...
PatriotDefense Posted June 1, 2017 Share Posted June 1, 2017 10 hours ago, Jezz said: any chance some of these grip designs will be available for small frames? Major update posted at the below link on the polymer grips........... http://forums.brianenos.com/index.php?/forum/314-patriot-defense/ Link to comment Share on other sites More sharing options...
MemphisMechanic Posted June 1, 2017 Share Posted June 1, 2017 Just preordered mine! About 85-90 sets left at the moment. Link to comment Share on other sites More sharing options...
johnbu Posted June 1, 2017 Author Share Posted June 1, 2017 3 hours ago, MemphisMechanic said: Just preordered mine! About 85-90 sets left at the moment. Better be quick, they're going faster than white castle's at a Grateful Dead concert! Link to comment Share on other sites More sharing options...
JusticeOfToren Posted June 2, 2017 Share Posted June 2, 2017 Waiting to be able to order palm swell on the left side and thin flat on the right side... Link to comment Share on other sites More sharing options...
MemphisMechanic Posted June 14, 2017 Share Posted June 14, 2017 Got mine. Better video that really lets you see the contours: First impressions? I was concerned they'd be too wide. They feel amazing. I can't imagine needing more traction. Dragging the gun down your forearm will leave scratches if you apply much pressure. No gaps and I like the way Joe used the screw head as an interference-fit with the hole to keep them from walking around. They are slightly harder to reach the mag catch on than a Henning or Scales grip. But only the slightest bit, and they're way better than factory wood grips. After a few dry reloads I don't see the need to carve a channel into them. Link to comment Share on other sites More sharing options...
kujo929 Posted June 14, 2017 Share Posted June 14, 2017 Thanks for video. They look great. Mine should be in tomorrow. Going to Pm you on the stock3Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
scffacenter1 Posted June 14, 2017 Share Posted June 14, 2017 You guys are killing me. I'm still waiting on mine plus parts. Link to comment Share on other sites More sharing options...
1eyedfatman Posted June 15, 2017 Share Posted June 15, 2017 Did you happen to get a weight on these with the screws? Link to comment Share on other sites More sharing options...
johnbu Posted June 15, 2017 Author Share Posted June 15, 2017 460 grains for the pair, without the screws. Mine are early prototypes and that may not be the current exact weight, but probably dang close. Link to comment Share on other sites More sharing options...
johnbu Posted June 15, 2017 Author Share Posted June 15, 2017 (edited) Oh, mine are blue. Edited June 15, 2017 by johnbu Link to comment Share on other sites More sharing options...
PatriotDefense Posted June 15, 2017 Share Posted June 15, 2017 16 hours ago, MemphisMechanic said: Got mine. Better video that really lets you see the contours: First impressions? I was concerned they'd be too wide. They feel amazing. I can't imagine needing more traction. Dragging the gun down your forearm will leave scratches if you apply much pressure. No gaps and I like the way Joe used the screw head as an interference-fit with the hole to keep them from walking around. They are slightly harder to reach the mag catch on than a Henning or Scales grip. But only the slightest bit, and they're way better than factory wood grips. After a few dry reloads I don't see the need to carve a channel into them. Sweet video Memphis..... I may need you to do Photo shoots for everything Link to comment Share on other sites More sharing options...
MemphisMechanic Posted June 15, 2017 Share Posted June 15, 2017 (edited) 44 minutes ago, PatriotDefense said: Sweet video Memphis..... I may need you to do Photo shoots for everything Here are some halfway decent images you're welcome to use on your website or social media, if you want. I don't do photos professionally anymore so it's cool with me - they're just screencaps from the original HD video on my phone anyway. SSI Scales vs PD Palm Swell: Edited June 15, 2017 by MemphisMechanic Link to comment Share on other sites More sharing options...
Tanfastic Posted June 15, 2017 Share Posted June 15, 2017 Those look really nice! Link to comment Share on other sites More sharing options...
PatriotDefense Posted June 15, 2017 Share Posted June 15, 2017 2 hours ago, MemphisMechanic said: Here are some halfway decent images you're welcome to use on your website or social media, if you want. I don't do photos professionally anymore so it's cool with me - they're just screencaps from the original HD video on my phone anyway. SSI Scales vs PD Palm Swell: Those curves....... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now