havfun Posted July 13, 2016 Share Posted July 13, 2016 is the case feeder the same on both machine? i have a 1050 may add a 650. Link to comment Share on other sites More sharing options...
GringoBandito Posted July 13, 2016 Share Posted July 13, 2016 I could not tell the difference between the one I have on my 650 and my 1050. Sent while driving 80 mph, eating a cheeseburger and using my knee to steer. Link to comment Share on other sites More sharing options...
alecmc Posted July 13, 2016 Share Posted July 13, 2016 i think the connection to the mount on the 1050 is square, where as on the 650 it's round. Dont quote me on it though. Link to comment Share on other sites More sharing options...
echotango Posted July 13, 2016 Share Posted July 13, 2016 (edited) . Edited July 13, 2016 by echotango Link to comment Share on other sites More sharing options...
moonman16 Posted July 13, 2016 Share Posted July 13, 2016 I have the casefeeder from my 1050 on my 650 currently. Link to comment Share on other sites More sharing options...
dillon Posted July 14, 2016 Share Posted July 14, 2016 The casefeeder is identical between the Super 1050 and the XL650. The recess in the bowl is molded to fit both the round and square posts. Link to comment Share on other sites More sharing options...
havfun Posted July 14, 2016 Author Share Posted July 14, 2016 thanks Link to comment Share on other sites More sharing options...
BeerBaron Posted July 15, 2016 Share Posted July 15, 2016 not that you need any further confirmation since dillon has replied but I use the 1050 casefeeder on my 650. works 100%. Link to comment Share on other sites More sharing options...
SterlingSomeone Posted July 15, 2016 Share Posted July 15, 2016 not that you need any further confirmation since dillon has replied but I use the 1050 casefeeder on my 650. works 100%. Agreed Link to comment Share on other sites More sharing options...
SixBarSpur Posted July 17, 2016 Share Posted July 17, 2016 Yep. I have a custom plate bolted to my bench drilled and tapped for both 1050 & 650 feet and can quickly switch out presses. I slip off my casefeeder, hang it on my pegboard behind (stays plugged in) & re-mount on the other press after installed and bolted down. Works great! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now