DesertTortoise Posted February 3, 2017 Share Posted February 3, 2017 Are your limited mags small frame mags? Large frame Link to comment Share on other sites More sharing options...
B_RAD Posted February 3, 2017 Share Posted February 3, 2017 22 minutes ago, DesertTortoise said: Large frame Thanks. Your Tanfo mags it in the 771 for glocks? Link to comment Share on other sites More sharing options...
OPENB Posted February 3, 2017 Share Posted February 3, 2017 Large frame mags fit in the STI 771 pouches too. Link to comment Share on other sites More sharing options...
DesertTortoise Posted February 3, 2017 Share Posted February 3, 2017 Thanks. Your Tanfo mags it in the 771 for glocks? Correction, I have the 773 pouches for the Glock 17/34 and they fit tanfo large frame mags Link to comment Share on other sites More sharing options...
ryridesmotox Posted February 4, 2017 Share Posted February 4, 2017 (edited) @IHAVEGAS Have you called ghost? That needs to be fixed by them If it's a manufacturer's fault Edited February 4, 2017 by ryridesmotox Link to comment Share on other sites More sharing options...
IHAVEGAS Posted February 4, 2017 Share Posted February 4, 2017 58 minutes ago, ryridesmotox said: @IHAVEGAS Have you called ghost? That needs to be fixed by them If it's a manufacturer's fault I bought them from Stoeger. They were gracious and prompt about supplying replacement pieces after I explained what had happened. They also politely suggested that I might have tightened the mounting screws more than was appropriate. Link to comment Share on other sites More sharing options...
GlockGuy1 Posted February 4, 2017 Share Posted February 4, 2017 I started with BladeTech, but now I have DAA Racers and like them much better. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted February 4, 2017 Share Posted February 4, 2017 @IHAVEGAS we don't get cold down here. (I'm from Chicago, so I smirk when the southern guys gripe about 33 degrees being cold, too.) But I've "fallen out of a shooting" area on the final target bit too effectively, and landed on my mag pouches when it was around 75 outside. None of the Ghosts noticed. I subscribed to the "slowly tighten them until you can't quite rotate them anymore, and stop right there" method of torquing the center bolt - with red loctite to ensure they hold that setting. Link to comment Share on other sites More sharing options...
IHAVEGAS Posted February 4, 2017 Share Posted February 4, 2017 8 hours ago, MemphisMechanic said: @IHAVEGAS we don't get cold down here. (I'm from Chicago, so I smirk when the southern guys gripe about 33 degrees being cold, too.) But I've "fallen out of a shooting" area on the final target bit too effectively, and landed on my mag pouches when it was around 75 outside. None of the Ghosts noticed. I subscribed to the "slowly tighten them until you can't quite rotate them anymore, and stop right there" method of torquing the center bolt - with red loctite to ensure they hold that setting. Just copied this from Stoeger's web site "Note: Please do not over torque the center screw as it will result in the pouch breaking. It appears that threadlocker may cause issues so we recommend not using it." FWIW. I have no idea why they do not recommend thread locker, otherwise I would try your approach if I was still using them. Still have 5 so maybe I will be them another chance one of these days. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted February 4, 2017 Share Posted February 4, 2017 (edited) Threadlocker can break down some plastics. It shouldn't be used when a screw is threaded directly into plastic. I only use it on the metal-to-metal fasteners, and far less of it than most use. Edited February 4, 2017 by MemphisMechanic Link to comment Share on other sites More sharing options...
tedahlenius85 Posted February 5, 2017 Share Posted February 5, 2017 I ran Ghost pouches when I shot Glock, hated the blocky belt attachment. Switched to DAA race master pouches, enpensive and good looking, worked well for 2 years while running my CZ's, but recently bought the regular DAA racers, and I like them alot. Smoother for the mags actually. And weighs a little less than the alu ones. So I recommend the racers. Great pouches thats not expensive. Skickat från min iPhone med Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now