kurtm Posted July 6, 2014 Author Share Posted July 6, 2014 Well played sir, well played!!! Link to comment Share on other sites More sharing options...
BOOM Posted July 6, 2014 Share Posted July 6, 2014 Kurtm I do public apologize for the razz, my bad; I have learn allot from you, including the weak hand reload. THANK YOU for even bothering to answering ever dum question out there its got to get repetitious. Link to comment Share on other sites More sharing options...
Headworked Posted July 6, 2014 Share Posted July 6, 2014 Does a rifle slug leave the barrel spinning to the right like a bullet would ? and without adjustable sights DONE ? A little off topic:v) I'd like to ask? whats a acceptably group sizes for 50 yrds, 75 yrds and 100 boom, Rifled slugs only spin to the right in northern hemisphere... If you go to South America to shoot, you have to get the left hand twisted ones... Easy way to remember, It's the same as the water in the toilets on spinning direction Link to comment Share on other sites More sharing options...
BOOM Posted July 6, 2014 Share Posted July 6, 2014 You mean that hole in the ground out back. (Trust me) You don't want to drop your shells down that barrel ok,ok back to the OP Link to comment Share on other sites More sharing options...
kurtm Posted July 6, 2014 Author Share Posted July 6, 2014 (edited) No, no, NO! BOOM I was laughing my ass off with your reply. You made my night. I absolutely love banter like this....I really do mean well played!!! :) I also saw that Trapr had answered it the right way on a different thread, so I was having a bit of sport...at your expense of course. Edited July 6, 2014 by kurtm Link to comment Share on other sites More sharing options...
Headworked Posted July 6, 2014 Share Posted July 6, 2014 (edited) Touché, my friend! C'mon Kurt... We can all have a lil fun can't we? Edited July 6, 2014 by Headworked Link to comment Share on other sites More sharing options...
Willz Posted July 15, 2014 Share Posted July 15, 2014 (edited) I contacted Rose Action Sports today. Steve was very helpful. He suggested I contact Remington before sending it to him. I did and the lady I spoke to told me the Versa Max I bought new this past Feb was made in 2011. She said that's odd because most VMs don't stay on the shelf for more than a year. So they sent me a shipping ticket and I'm sending it out tomorrow. (He also told me the jig doesn't really work for the VM just the Benelli. ) Edited July 15, 2014 by Willz Link to comment Share on other sites More sharing options...
Headworked Posted July 16, 2014 Share Posted July 16, 2014 Willz I have a fixture that works for VersaMax. Sent you a PM. If workin with Remington doesn't work out, give me a holler. Thanks Link to comment Share on other sites More sharing options...
chase214 Posted July 17, 2014 Share Posted July 17, 2014 Does anyone know if these jigs will work on the one piece tube (xrail) Link to comment Share on other sites More sharing options...
GunCat Posted July 17, 2014 Share Posted July 17, 2014 Will it work with the rci tubes that replace the stock magazine tube and extension all in one piece? Bump No it won't. You are at the mercy of acme threads on that deal. Link to comment Share on other sites More sharing options...
Headworked Posted July 17, 2014 Share Posted July 17, 2014 (edited) Chase214, yes, the one piece tubes by RCI are able to be aligned to perfect your slug shots, using a fixture designed for those long 1-piece tubes. Edited July 17, 2014 by Headworked Link to comment Share on other sites More sharing options...
dohboy Posted August 3, 2014 Share Posted August 3, 2014 I contacted Rose Action Sports today. Steve was very helpful. He suggested I contact Remington before sending it to him. I did and the lady I spoke to told me the Versa Max I bought new this past Feb was made in 2011. She said that's odd because most VMs don't stay on the shelf for more than a year. So they sent me a shipping ticket and I'm sending it out tomorrow. (He also told me the jig doesn't really work for the VM just the Benelli. ) My VM tactical also shoots high and to the right with slugs. I'm curious as to what Remington is going to do to correct the POI and are they going to charge you? Link to comment Share on other sites More sharing options...
wmiller11 Posted September 11, 2014 Share Posted September 11, 2014 I'm shooting a benelli vinci with rci x rail one piece tube. I consistently shoot 10+ high at 25 yards and every bit of 20+ at 50. Where can I get this gun tuned with these "fixtures" Thanks I'm in Washington Link to comment Share on other sites More sharing options...
kurtm Posted September 11, 2014 Author Share Posted September 11, 2014 Sorry the gauge only works on M1/M2 shotguns. I was just starting to work on Vinci,s....but I don't have access to one anymore. I would suspect that it has quite a bit to do with the spring pressure it takes to put them together, as that directly impinges the barrel half way down, but that is just a guess. Link to comment Share on other sites More sharing options...
CJW Posted September 11, 2014 Share Posted September 11, 2014 Does the Vinci have the same potential issue? I would have thought the two-piece design with the barrel/receiver module would make the barrel alignment a completely different beast than the M2 style setup. Link to comment Share on other sites More sharing options...
wmiller11 Posted September 11, 2014 Share Posted September 11, 2014 Everything that I have read and experienced is that the vinci shoots crazy high with slugs. I have shimmed to the max and get a good sight picture. However I routinely struggle with slugs at matches due to POI/POA issues. I don't see. Much room for Bending as the rci tube and barrel nearly touch at the muzzle. Maybe it's time for a new 3 gun scattergun Link to comment Share on other sites More sharing options...
gondo Posted September 12, 2014 Share Posted September 12, 2014 Everything that I have read and experienced is that the vinci shoots crazy high with slugs. I have shimmed to the max and get a good sight picture. However I routinely struggle with slugs at matches due to POI/POA issues. I don't see. Much room for Bending as the rci tube and barrel nearly touch at the muzzle. Maybe it's time for a new 3 gun scattergun i dont know anything about the vince except the safety is in the wrong place lol.... BUT i would think that if the rci tube almost touches the muzzle then there is a very good chance the barrel band is getting a lot of upward pressure in turn pushing up on the barrel and could definately be making slugs hit high... that is what would happen to an m2 i do believe, now with that being said the vinci may be so different from m2 that this is not the case at all... Link to comment Share on other sites More sharing options...
rcollier Posted September 12, 2014 Share Posted September 12, 2014 My Vinci was 10" high at 50 yds. so I mounted a Hi Viz FO front on a .125" spacer cut to the width of the rib. (1/8 X 1 flat bar) Used a longer mounting screw through the Hi Viz , spacer and into the OEM threads then drilled and pinned it like Mike @ AI did to my M2. Right on the money now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now