dohboy

Thanks for the info. I'm currently working up a load for it, and will run some factory brass casing ammo through it soon.

I am new to Canik and I picked up a Rival-S Darkside. The sticker on the case had December XX, 2023. Would this date be considered one of the newer batches that had the issues resolved?

Had the same experience as Seoderus. 24 out of the package. I loaded it with one brand of 115 gr factory ammo and got 24. I then tried another brand of 124 factory ammo and was able to get 25, but it was a solid 25. This weekend I did 25 plus 1 with no issues. Would not recommend reloading off the belt with 25 at this time from my limited experience with it. They are very well made and will probably order some more.

This...Other mag extensions like the Taran's and the Dawsons don't use them either.

I prefer the DAA pouches with SS inserts, but I run them "bullets out".

I've had good luck with both the Wilson 10mm and Tripp 10mm mags. Depending on the bullet weight, my OAL varies between 1.180 and 1.200.

I have had good luck with both the Tripp Cobras and the Wilson 47NXs as long as my rounds were loaded out to 1.180 or slightly longer. They are both quality mags. I am leaning towards purchasing more Tripp mags only because I can to load 10 + 1 for "minor" at local matches. Good luck.

I am thinking about purchasing a 19X as well. Would a magwell made for a Gen 5 work on the 19X?

Tripp mags for L-10. Plus their customer service is one of the best!

Their web site shows $299.95 but they are currently sold out.

Would using either Of these pads along with a comb pad such as a cheek-eez help even more?

Great video and instruction. What power did you use to engage those targets?

I have an HK branded Benelli M1S90 with an 18" barrel. I recently obtained a 26" M1S90 vented barrel and forend to use for 3GN. The forend from my 18" is different than the 26" forend. The opening at the rear of the 18" forend is larger and allows it to fit over the mag tube where the opening on the 26" forend is smaller and will not fit over the tube. I am able to install the 26" barrel on my HK M1S90 as long as I use my 18" forend. If I use this combo (18" forend with 26" vent barrel), am I good to go? I am by no means a Benelli expert or historian, so can someone explain the differences with the forends? The picture with the receiver and forend are from my 18" HK M1S90. The other pictures show the differences between the forends (18" on the left in both pics). Apologies for the poor pic quality. Thanks in advance.

Will it fit Gen4s with the grip inserts installed? The product description didn't specify and I do like the way they look!

Gen4 G34, medium beavertail, feels great to me.

Anyone have experience with them and/or their products? Their work and products looks great. Interested in their straight triggers and mag wells. https://www.facebook.com/AgencyArms

^^^^^ This

Thanks for the replies and great info. The "CZ 75 Shadow", #91700, is a long dust cover with rails. The absence of the "SP 01" designation on the slide threw me off. CZC provided a brief explanation on these guns: CZ 75 SHADOW RAIL 9mm FACTORY GUN This is a factory shadow with no firing pin blocks. We have a very few on hand, same specifications as a CZ 75 SP01 Shadow but with a slide marked CZ 75 Shadow. Frame only is marked with serial number. (This is a very similar situation the CZ P01's that arrived in the USA marked as CZ 75 Compact D, Same pistol just different nomenclature on slide) With that info, seems like the only difference between the CZ 75 Shadow and the CZ 75 SP 01 Shadow is the slide markings and the rubber grips. Otherwise it appears to me to be the same gun. Would that be correct?

Being a relative newbie to the whole CZ SP01 Shadow line and after reading Gussers great post, the "CZ 75 Shadow" was definitely "not normal". Would I be correct in assuming there would be nothing wrong taking this gun and building it up to the specs of a CZC SP01 Shadow to shoot in Production?

that is a very good explanation. it's on the models like 'shadow custom, shadow target, etc' that are modified by CZC (or another customer shop). The CZ SP01 Shadow is a standard production gun from CZ UB. they are just harder to find in the states since there is demand for the customised models. So when CZC gets a shadow in stock they have a choice. They can sell it as is and make a few bucks, or they can customise it and make a few more bucks and fill the orders they have for custom stuff. and yes, of the factory models the SP01 Shadow is generally the most sought after. to confuse things further CZ UB do produce tuned/upgraded models of the SP01 shadow in other markets like the SP01 Shadow 2012, the SP01 Shadow Mate (Canada and Australia versions). They have all the factory tuned parts (comp hammer, stainless guiderod, cerakote frame and slide instead of polycoat, tighter hand fitted slide and barrel, different sights etc) and come in a fancy case with some accessories. Great explanations gentlemen, but I'm still a little confused regarding a particular model of Shadow. The CZC site offers a "CZ 75 Shadow", #91700. This does not have SP01 marked on the slide and the description indicates the serial number is on the frame only and not the slide. How is the CZ 75 Shadow, different from an SP01 Shadow?

No, the Texas Gulf Coast Multi-Gun Championship will be held on April 10 - 12, here is Corpus Christi. Here is our website link, it contains all the latest info. We have not rescheduled and will not, these are firm dates. Thanks! http://cc3gun.com/texas-gulf-coast-multi-gun-championship-2015/ Thank you for The clarification! We're good to go!

To clarify, the match has been moved from April 10-12 and is now scheduled for April 24-26? There was nothing on the web site or the early bird self squadding regarding the date change. I just want to be sure because a group of us signed up when we thought the match was going to be April 10-12 and hopefully the date change won't effect our plans to go. We are really looking forward to it!

Has the match fee been determined?

My VM tactical also shoots high and to the right with slugs. I'm curious as to what Remington is going to do to correct the POI and are they going to charge you?

Does that mean a Gen 4 with a medium backstrap is the same size as a non-SFGen 3 G21?