gator11 Posted December 1, 2012 Share Posted December 1, 2012 Been thinking about getting a suppressor for my Ruger 22/24 but have no idea of what to look for in one. I have all the correct paperwork to purchase one so I need some advice. Really just want something that is easy to clean, durable and of course quiet. Any first hand knowledge would be greatly appreciated. Thanks in advance for all the help. Link to comment Share on other sites More sharing options...
DrawandDuck Posted December 1, 2012 Share Posted December 1, 2012 (edited) For the money the Silencerco Warlock II is hard to beat...Just like everthing everyone will have a different opinion....for the .22 LR this one is easy to clean and has good noise reduction....there are some quiter ones out there but the cost also doubles... Edited December 1, 2012 by DrawandDuck Link to comment Share on other sites More sharing options...
ben b. Posted December 1, 2012 Share Posted December 1, 2012 Been thinking about getting a suppressor for my Ruger 22/24 but have no idea of what to look for in one. ... Really just want something that is easy to clean, durable and of course quiet. . I have several silencers. You are smart to go for a servicable model in .22 LR, b/c the rimfire cans do gunk up if you shoot them much. The top models are, in no particular order, AAC Element, SWR Spectre, Liberty Essence or Kodiak, & Silencerco Sparrow. K-baffles stink to clean by hand and I'm not sure what SWR's omega baffles are like to clean by hand, If it was me, I'd be looking at Silencerco or Liberty because they have monolithic baffle stacks and are easier to clean.I have all the correct paperwork to purchase one so I need some advice.I don't know what this means. You don't need any paper work to purchase one, you need an approved form 4 to take possession, and that doesn't start until you purchase the can AND send in the form 4 and fee. Link to comment Share on other sites More sharing options...
gator11 Posted December 1, 2012 Author Share Posted December 1, 2012 Perhaps that's the form I have? My local dealer gave it to me, basic personal info and picture. Signed by off by local law enforcement. I need to decide which to purchase and turn over paperwork. The dealer only stock's YHM Mite model's for .22lr. Have not heard much in the way of good experiences with that particular model. Have read some good reviews about the Sparrow but want some feedback before I make any purchase. Link to comment Share on other sites More sharing options...
r0kawn Posted December 1, 2012 Share Posted December 1, 2012 Absolutely love my Sparrow. It's a breeze to clean and super quiet. Also rated for several other calibers like 5.7 and such. Highly recommend. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Jaxshooter Posted December 1, 2012 Share Posted December 1, 2012 Coastal Gun in Brunswick, GA makes a great line of suppressors. Link to comment Share on other sites More sharing options...
ben b. Posted December 2, 2012 Share Posted December 2, 2012 Perhaps that's the form I have? My local dealer gave it to me, basic personal info and picture. Signed by off by local law enforcement. I need to decide which to purchase and turn over paperwork. The dealer only stock's YHM Mite model's for .22lr. Have not heard much in the way of good experiences with that particular model. Have read some good reviews about the Sparrow but want some feedback before I make any purchase. Do not buy the Mite. It works but is one of the loudest, and beaten by many others at a similar price, like a Gemtech OB-2, which these days I wouldn't buy again, either. 3rd party sound tests are one way to eval a silencer, and nfattalk.org has gobs of sound test info & reviews. Silencers are hard to sell after you buy them ($200 tax for a transfer to another person) so I'd suggest pricing out the top cans and picking one.I recommend that you pass on the Mite. Thompson Machine Isis 22 would be worth a look at that price range. I have a TM can that is pretty slick, and they are super competitive in price. Link to comment Share on other sites More sharing options...
converse15 Posted December 3, 2012 Share Posted December 3, 2012 Do you just want a 22 can or do you plan on shooting other rimfire calibers. Ben B gave you excellent suggestions. The SWR Warlock is a pretty good can for 22s. The SWR Spectre II is all rimfire capable and can even handle the 5.7x28. The Silencerco Sparrow will handle the same loads as the Spectre II. These companies are pretty much the same as I believe Silencerco bought SWR. The AAC Prodigy or element would be nice too, I think AAC overall makes some of the nicest cans out there. If you stick to any of these cans you wont be sorry it just depends on what you want to spend and what you are going to use them for. I believe these run in the 300-550 range. Link to comment Share on other sites More sharing options...
gator11 Posted December 4, 2012 Author Share Posted December 4, 2012 I looked at the Element today. It was $550, it seemed real nice. Looked like it would be easy to clean. They didn't have a Prodigy in stock. I have been to two local dealers and neither has very knowledgeable sales people to explain the difference between makes and models. Thank you guys for the feedback, thus far its all the help I have to make a decision. Hoping to another dealer this weekend, I'll see how that goes. Link to comment Share on other sites More sharing options...
hitman Posted December 4, 2012 Share Posted December 4, 2012 Pm sent. Link to comment Share on other sites More sharing options...
mrmetalweld57 Posted December 4, 2012 Share Posted December 4, 2012 I use a Elite Iron Echo 6". Very quiet, very easy to clean. Well made. Ed Link to comment Share on other sites More sharing options...
ben b. Posted December 4, 2012 Share Posted December 4, 2012 Element is K baffles, with lots of nooks & crannies, and they look like a PITA to clean, unless you have a blast cabinet. I want something I can wipe free of most crap with a green scrub pad and move on to something fun. Link to comment Share on other sites More sharing options...
DrawandDuck Posted December 4, 2012 Share Posted December 4, 2012 Once you do decide send in the paperwork & check then forget about it for a while as it has been taking about 6 months for the ATF to process the paperwork....... Link to comment Share on other sites More sharing options...
Who Knew Posted December 5, 2012 Share Posted December 5, 2012 I have the SWR Spectre and love it. It's easy to take apart and is super quiet. The only downside to it is the weight. I have the stainless model and it's a little muzzle heavy on a pistol but balances nicely on rifles. If I had to buy another I would go with the Spectre again. Take your time deciding and save some extra money and get what you want. Link to comment Share on other sites More sharing options...
ben b. Posted December 5, 2012 Share Posted December 5, 2012 I have the SWR Spectre and love it. It's easy to take apart and is super quiet. What is involved for cleaning off the Spectre baffles? Link to comment Share on other sites More sharing options...
assaulter Posted December 5, 2012 Share Posted December 5, 2012 I have and love the spectre also. Any baffle shot with a .22 is a pita to clean. With the spectre you can clean each baffle individually. A stiff brush and some elbow grease is all that's needed. There is also the "dip". 50/50 solution of hydrogen peroxide and vinegar. However, when used on lead this liquifies the lead and creates lead acetate. A hazardous waste that can be absorbed into the skin. Use appropriate safety measures and disposal procedures. Do not use it on aluminum. The sparrow is a great can too and easy to take apart. Can't go wrong with either. Link to comment Share on other sites More sharing options...
Who Knew Posted December 6, 2012 Share Posted December 6, 2012 What is involved for cleaning off the Spectre baffles? To clean the baffles on the Spectre you take it apart with the supplied tool, it simply pushes them out via a threaded rod and special little pusher. I then soak them in the "dip" for a day or two depending on how many rounds have been through it. Last time it had several thousand rounds of CCI std. velocity and I had to let it soak for three days. Then I use a brass bore brush to finish it up. It takes about an hour of leisurely scrubbing to get it back to squeaky clean. If you do get stainless and use the "Dip" be sure to read up on safe handling of the solution. Link to comment Share on other sites More sharing options...
MECHENG1 Posted September 6, 2013 Share Posted September 6, 2013 Element is K baffles, with lots of nooks & crannies, and they look like a PITA to clean, unless you have a blast cabinet. I want something I can wipe free of most crap with a green scrub pad and move on to something fun. Great information. I'm considering a TM Isis22. How is this cleaned please? Has anyone ever done a video or have pictures of the Isis 22 disassembly? My gun dealer is trying to sell me on a Coastal Passport, says that he hasn't heard of and can't order an Isis. But I'm tempted to try to order an Isis 22 anyway from somewhere. Any thoughts? Thanks Link to comment Share on other sites More sharing options...
bigcraig Posted September 7, 2013 Share Posted September 7, 2013 I have a couple of .22lr suppressors. One is a Tactical Innovations Stratus, this can pretty much lives on a Ruger 22/45 with a Tactical Solutions top end. looks and sounds great and is user serviceable. The second is a Thompson Machine Zephyr XL, this can lives on two hosts. First host is a Savage MKII FV-SR, on this host it is "STUPID" quiet. Second host is a 5" barrel AR upper using CMMG .22lr components that I run on one of my SBR'd lowers. Great suppressor, quiet, user serviceable and economical. Link to comment Share on other sites More sharing options...
crowmag Posted September 11, 2013 Share Posted September 11, 2013 I would recommend a Elite Iron Link to comment Share on other sites More sharing options...
Franco79 Posted September 11, 2013 Share Posted September 11, 2013 I have the YHM Mite. No issues at all. Link to comment Share on other sites More sharing options...
zsavage81 Posted September 16, 2013 Share Posted September 16, 2013 For .22 cans I have AAC Element II and the alum one that's a step down, Gemtech (can't remember the model but the one that retails for $300-350), SWR warlock II, and the 100% titanium .22 can from Tactical Suppressed Weapons. The TSW can is hands down the best but its also one of the most expensive at $550, after that in 2nd place on the same gun, same ammo, same day, the SWR can was noticeably quiet than any of the others. The SWR is also a $300-350 can. If you want the best you can get call Chad at TSW though, that guy is a suppressor wizard! Link to comment Share on other sites More sharing options...
HotLoad Posted September 16, 2013 Share Posted September 16, 2013 I have a AAC prodigy and it has been great. It is a monolithic baffle which is easier to clean. The better part of my personal story is this .... A lot of the major companies make great cans that are quiet and work as advertised. My can worked great till I didn't clean it as often as I should. I then tried to open it with no success. I contacted aac and they said to send the ca back to them. They even paid the shipping. They took a look at it and said that I need to clean it more often . Lead was pouring out the front! After much to do they finally broke the baffle free. Short if it is they sent the can back to me with new upgraded internals as o rinds and a free t shirt to boot no charge. All in less than a week. I will continue to buy AAC products!!!! Link to comment Share on other sites More sharing options...
JaybirdCU Posted September 29, 2013 Share Posted September 29, 2013 I am in the same boat. I decided on the Element 2. I didn't want a monocore because I dont want any FRP. The Element 2 comes apart easily and looks great on my 22/45 Lite. Link to comment Share on other sites More sharing options...
Chaser_2332 Posted September 29, 2013 Share Posted September 29, 2013 I have had a huntertown guardian a while, I have shot most of the other .22 can on the market. I have won many other .22 cans and so far havnt been impressed with the others over the huntertown for me to redeem the certificates and pay another $200 for a stamp. Some .22 cans are better than other that's an undeniable fact but I don't think its nearly as much difference as it is in centerfire cans. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now