Sleepswithdogs Posted May 28, 2012 Share Posted May 28, 2012 (edited) ...I have has some "Flareups" that was like my brain was sitting on a big speaker cranked up to amplify every sound. some sounds felt like an ice pick to my brain. The pain and scream is not so much in the ears as its in the brain side. Get Better Hearing Protection! Most of the cause of my problem is from tools like saws and grinders. Teaching Sporting clays set it off after a long weekend with a large corporate class. Also sounds a bit like food allergies. Some are suggesting that food allergies/inflammation is the actual source of ischemic artery disease, not cholesterol, which may be only a substance the body uses to patch the tiny cracks that can develop in an inflamed artery. Edited May 28, 2012 by Sleepswithdogs Link to comment Share on other sites More sharing options...
teejay Posted May 30, 2012 Share Posted May 30, 2012 (edited) I hate breaks, I've had ringing ears since age 18. So I have been very careful ever since. I plug with 33dB and wear the Pro ears with another 33 dB of protection. A hat and safety glasses will break the seal of the muffs on your head. I tried a Quicksilver Titanium suppressor for a few matches. Running a suppressor has pros and cons. Pros: 1.) My ears rang less after a match or range session. 2.) Lots of comments and NFA discussions while pasting targets. 3.) RO's will thank you. Cons: 1.) Timers didn't pickup the shot so I dropped the idea. 2.) Burn and melt carpet in dump barrels. (think about doing a reshoot after a 50 round stage) 3.) Increased bolt velocity, thus recoil. That is despite adjusting my gas block. 4.) Multiple "put him in open" comments. 5.) Nasty dirty mags, ammo, and gun. 6.) 13 oz at the end of the muzzle is a very noticeable change in handling. 7.) Reduces my sight picture for my TR24. 8.) Gas blow back in my face. 9.) CTR upper rail holes for ACOG attachment caused my scope to be eroded by blow back gasses. I'd like to try a smaller mini suppressor like a 4" long one, but I'll wait to try someone else's before buying and paying the tax. Generally smaller suppressors have more back pressure. I think breaks should be in the open division only. Do a stage with 20 tube style ports, you'll hate any compensator after that. Best of luck saving your ears in 3gun. Edited May 30, 2012 by teejay Link to comment Share on other sites More sharing options...
rugerdawg Posted May 30, 2012 Share Posted May 30, 2012 I just ordered the spike's dynacomp for my .308. I'll post a report as soon as I get a chance to compare it to the stock a2 that came on it. Link to comment Share on other sites More sharing options...
Jin Posted June 1, 2012 Author Share Posted June 1, 2012 (edited) shot a match last weekend, changed out my miculek brake for an A1 flash hider. ears still rang a little after the match, so it must be the other shooters, not my rifle; but i'm still going to run mine without a brake. I did mess up a couple times though...the ear muffs were bothering me, so i took them off while taping up targets, and forgot to put them on with a couple shooters blasting loud ass brakes (was just wearing ear plugs). i'm wearing peltor triple flanged ear plugs (26 db), and howard leight impact sports (22 db). I hate breaks, I've had ringing ears since age 18. So I have been very careful ever since. I plug with 33dB and wear the Pro ears with another 33 dB of protection. A hat and safety glasses will break the seal of the muffs on your head. I tried a Quicksilver Titanium suppressor for a few matches. Running a suppressor has pros and cons. Pros: 1.) My ears rang less after a match or range session. 2.) Lots of comments and NFA discussions while pasting targets. 3.) RO's will thank you. Cons: 1.) Timers didn't pickup the shot so I dropped the idea. 2.) Burn and melt carpet in dump barrels. (think about doing a reshoot after a 50 round stage) 3.) Increased bolt velocity, thus recoil. That is despite adjusting my gas block. 4.) Multiple "put him in open" comments. 5.) Nasty dirty mags, ammo, and gun. 6.) 13 oz at the end of the muzzle is a very noticeable change in handling. 7.) Reduces my sight picture for my TR24. 8.) Gas blow back in my face. 9.) CTR upper rail holes for ACOG attachment caused my scope to be eroded by blow back gasses. I'd like to try a smaller mini suppressor like a 4" long one, but I'll wait to try someone else's before buying and paying the tax. Generally smaller suppressors have more back pressure. I think breaks should be in the open division only. Do a stage with 20 tube style ports, you'll hate any compensator after that. Best of luck saving your ears in 3gun. thanks for posting your experience...it has me re-considering going the route of a suppressor. will also look for some better ear plugs. Edited June 1, 2012 by Jin Link to comment Share on other sites More sharing options...
Younger Posted June 3, 2012 Share Posted June 3, 2012 Just unscrew one, put on another. What other stuff are you talking about?I can't leave well enough alone. I am putting together a 16" middy upper with a pencil barrel, Syrac Ordnance adjustable gas block, Samson evolution 15" handguard I had custom anodized green. There are a few local maches that only shoot 100 yards as well as the Pro Series so I'm gonna mess around with shorter and lighter. Jesse, I also have ordered a 15" Samson Evolution handguard for my 16" pencil barrel. What style of Syrac Ordnance adjustable gas block did you use? The set screw attachment or the clamp on style? Link to comment Share on other sites More sharing options...
Clint-M Posted June 3, 2012 Share Posted June 3, 2012 (edited) Syrac only offers the set screw for pencil thin barrels. CM Edited June 3, 2012 by Clint-M Link to comment Share on other sites More sharing options...
MickB Posted June 3, 2012 Share Posted June 3, 2012 Sounds a lot like the upper I built for my son, except it has the 12.5" rifle Samson Evolution HG. It currently has a pinned Daniel Defense low profile gas block, but I have been thinking of putting on a Syrac adjustable gas block... Mick Just unscrew one, put on another. What other stuff are you talking about? I can't leave well enough alone. I am putting together a 16" middy upper with a pencil barrel, Syrac Ordnance adjustable gas block, Samson evolution 15" handguard I had custom anodized green. There are a few local maches that only shoot 100 yards as well as the Pro Series so I'm gonna mess around with shorter and lighter. Link to comment Share on other sites More sharing options...
Running Dog Posted June 18, 2012 Share Posted June 18, 2012 Alamoshooter, Just a thought......... My ears have been ringing & roaring since around age 12 when my brain dead cousin touched off a 12ga. a couple feet from my right ear, then there was a tour in 1969 firing a 4.2 in. mortar & countless M16 rounds without ear protection, then there have been 35 years of power tools being fired up next to me before I could get my muffs on and years of hunting without ear muffs and those fun days at the range when the proud owner of a .50 BMG super-sniper with a brake that bitch slaps you even with your muffs on ,not to mention 100's of rock concerts!!!!!!!!! But something I have found that really takes the ringing to another level is ASPIRIN ! Luckily that one isn't permanent, but if you ever take some ,and alot of us our age do for alleged heart attack prevention , you will have ringing ears and if you quit the aspirin the roar will fade back to normal after a couple of days. Link to comment Share on other sites More sharing options...
ltdmstr Posted May 17, 2013 Share Posted May 17, 2013 Meds, stress, and muscle tension can be huge factors when it comes to ringing. Aspirin and antihistamines are really bad. Link to comment Share on other sites More sharing options...
3guns Posted May 21, 2013 Share Posted May 21, 2013 It sounds like you need to invest in good quality ear protection. Its not worth damaging your hearing. Link to comment Share on other sites More sharing options...
mpom Posted May 23, 2013 Share Posted May 23, 2013 Alamoshooter, Just a thought......... My ears have been ringing & roaring since around age 12 when my brain dead cousin touched off a 12ga. a couple feet from my right ear, then there was a tour in 1969 firing a 4.2 in. mortar & countless M16 rounds without ear protection, then there have been 35 years of power tools being fired up next to me before I could get my muffs on and years of hunting without ear muffs and those fun days at the range when the proud owner of a .50 BMG super-sniper with a brake that bitch slaps you even with your muffs on ,not to mention 100's of rock concerts!!!!!!!!! But something I have found that really takes the ringing to another level is ASPIRIN ! Luckily that one isn't permanent, but if you ever take some ,and alot of us our age do for alleged heart attack prevention , you will have ringing ears and if you quit the aspirin the roar will fade back to normal after a couple of days. That ringing is actually one of the symptoms of Aspirin toxicity. Just how much aspirin were you taking? Mini dose, or 81 mg every other day should not do this. Link to comment Share on other sites More sharing options...
Silver4.6 Posted May 27, 2013 Share Posted May 27, 2013 Just unscrew one, put on another. What other stuff are you talking about?I can't leave well enough alone. I am putting together a 16" middy upper with a pencil barrel, Syrac Ordnance adjustable gas block, Samson evolution 15" handguard I had custom anodized green. There are a few local maches that only shoot 100 yards as well as the Pro Series so I'm gonna mess around with shorter and lighter. Pics when finished. I want to see that HG.I'm surprised that the new Seekins brake has not entered the discussion, for a while it seemed like it was the end all be all of brakes and now I don't see anyone mentioning it. CM I'm using the Seekins brake and I've been pretty happy with it. It is still much louder than a flashhider, but certainly not as loud as an SJC or some others i have heard. Link to comment Share on other sites More sharing options...
Fast351 Posted June 3, 2013 Share Posted June 3, 2013 Find a company in your area that does these: http://www.earinc.com/p1-nonelectronic-instamold.php They're the injected plugs that form to your ear. Takes about 10 minutes to make, then they apply a compound that seals the plug material. Best $40 I've ever spend. They're the only thing I wear anymore, and just judging by the ratings of other muffs and how quiet they are, I'd say 30+ dB of noise reduction. Mine have lasted years, I'm getting another set too as spares. Don't interfere with rifle shooting either. Around here you can usually find a company that does them at game fair shows, gun shows, etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now