CuPlatedPb Posted August 17, 2011 Share Posted August 17, 2011 I try my best to keep in touch with our customers in regards to our products, feel free to ask any questions or invite me to a post if I can add any insight. I'm an avid shooter and have been in the industry for more than 25 years from the manufacturers side of the products. Had the fortune to learn a lot about reloading from the 5 years I spent at Dillon and have been reloading since I was 14, learned to load for my .270 rifle. My mom would drop myself and a buddy off Saturdays in the desert outside Phoenix so we could walk around and shoot all the small critters that we happened upon, then she would pick us up before dark. I wouldn't recommend letting your 14 year old learn to reload on his own with a hi-power rifle and let him keep it under his bed next to the ammo, but that was how we were raised. I survived and now my 16-year old can't seem to be able to gas his own car, that's my own fault and makes my parents look all the wiser. Jay R. Phillips Berry's MFG Link to comment Share on other sites More sharing options...
Amerflyer48 Posted August 17, 2011 Share Posted August 17, 2011 Welcome aboard,.. I have sent quite a few of your projectiles down range,..always happy with the product and your support of the sports ! John Link to comment Share on other sites More sharing options...
J-Ho Posted August 17, 2011 Share Posted August 17, 2011 Welcome People who have lots of bullets are always welcome Link to comment Share on other sites More sharing options...
CuPlatedPb Posted August 17, 2011 Author Share Posted August 17, 2011 Thanks for the welcome, my desk usually has bullets of various forms scattered around so I resemble that remark. Link to comment Share on other sites More sharing options...
Cuz Posted August 18, 2011 Share Posted August 18, 2011 Thanks for putting out a fine product at a good price. I've been shooting nothing but Berry's for the past 5 years or so now. I just love those 9mm 124gr RNDS bullets! Keep up the great work. -Cuz Link to comment Share on other sites More sharing options...
chbrow10 Posted August 18, 2011 Share Posted August 18, 2011 I've used your product in both my 1911 and my son's 9mm Glock. I've always been happy with the product. Welcome to the Enosphere. Link to comment Share on other sites More sharing options...
Sarge Posted August 18, 2011 Share Posted August 18, 2011 Welcome! Since you are here I'll ask a question if you don't mind. Will your plating hold up in an Open gun? The general consensus is that they won't. I have never used a Berry Bullet so I am just going on what I hear and read. A 115 would have to make about 1480 fps. Link to comment Share on other sites More sharing options...
True Grit Posted August 18, 2011 Share Posted August 18, 2011 Any plans for making any 170 grn 38 cal bullets in the future ? Link to comment Share on other sites More sharing options...
GuyC Posted August 18, 2011 Share Posted August 18, 2011 I just ordered a a couple boxes of 180's. Link to comment Share on other sites More sharing options...
GrumpyOne Posted August 18, 2011 Share Posted August 18, 2011 Welcome! Since you are here I'll ask a question if you don't mind. Will your plating hold up in an Open gun? The general consensus is that they won't. I have never used a Berry Bullet so I am just going on what I hear and read. A 115 would have to make about 1480 fps. This, I am interested in as well..... Link to comment Share on other sites More sharing options...
ChuckS Posted August 18, 2011 Share Posted August 18, 2011 Welcome! Since you are here I'll ask a question if you don't mind. Will your plating hold up in an Open gun? The general consensus is that they won't. I have never used a Berry Bullet so I am just going on what I hear and read. A 115 would have to make about 1480 fps. This, I am interested in as well..... I knew folks who shot plated 38 super in open under the old power factor and they worked just fine. I use the plated 135 in open .40 at 1250-1300 fps and they are fine. I suggest you get a 100 or so and try them. You will know then Link to comment Share on other sites More sharing options...
CuPlatedPb Posted August 18, 2011 Author Share Posted August 18, 2011 I appreciate the interest, but I keep falling on myself in trying to communicate in the forum. It's all my fault, I can't seem to stay within the forum guidelines (no fault but my own) so if you guys have any questions you can PM me and I will answer your questions as quick as I can. Don't feel I'm bailing on the forum but I have a very hectic schedule and can't keep stepping back to see what I've done. I can appreciate what Brian has set up as a pure forum and respect that very much, my intentions were never to step in and try to use it as a sales tool. If you guys are on other forums (nearly 20 that I participate in) you will see that is never my intentions. I'll do my best to get back with you as soon as I can. Thanks -Jay Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now