sarnburg

Here is one, not in the US. http://www.aussietargettechnologies.com.au/

From the CZ manual: The design of this handgun incorporates the feature that the manual safety can not be applied when the hammer is not cocked to avoid reducing the readiness of the pistol for use by accidental engaging of the manual safety. (https://www.czub.cz/media/attachment/file/i/n/instruction-manual-cz-75-sp-01.pdf) So if the safety on your firearm will engage while in DA mode then the internal parts have worn (or been modified) to the point that they do not function correctly. There were probably 50 different CZ guns that came through chrono at A3, exactly two failed this check. Scott

We setup and teardown the day of the match. Our weekly matches are 3 stages,you and weekend are six stages. When posting the match information I post setup time followed with the statement that shooting starts as soon as stages are ready. We normally do not have any problem get stages up and down in timely manner. Scott

No because it was not a PS issue. The tablets in question kept losing WiFi connection. I suspect one to many drops. Scott

Nothing is easy to see in bright sun. We bought a bunch of the Practiscore shades for sunny days. The ease of use and syncing is what cemented the decision for us.

We have been using Practiscore since right after it's release. We started with an Ipad for a master device and several different android tablets and nooks (OMG the pain) as scoring devices. This year after a few problems with our older android devices, battery life was diminishing and we were having problems with syncing. We went ahead and bought 12 current generation Ipad mini's. What a difference! The scoring is lighting fast, the battery life is outstanding, and most importantly the syncing is seamless. My stats guy never has to interrupt the stage. He pulls into the bay with the router and can pull scores 30 seconds later. We will keep the older devices as backups giving us a pool of 30 devices to run a match if need be. But it will be a dire situation if we have to use anything buy an IoS device. Scott

Unless it is an all classifier match we do not allow re-shoots. If you go to a level 2+ you do not get to re-shoot a stage you do not like the score on. We also do not allow multiple entries for the same competitor. If the MD has time we will occasionally leave classifier stages up after the rest of the match is tore down. Once everything but the classifier stage(s) is put away competitors may shoot other divisions. Many times I will RO and score to help get people through and classified. We adopted the single entry rule to keep the match moving. Scott

They have to find me and wait to get added to a squad. This way I can make small talk and slip in a comment like "glad you could make it, even a little late. It will be nice to have all your help during tear down". Many times I will walk them to their bay and add them to the scoring device myself. Once the squads have moved from their starting bays we do not normally accept any more competitors. I also give out my cell number and I get texts of people running late. One thing I forgot is we do all online registration through Practiscore and also take match payments. This way I spend less time checking people in. Scott Arnburg

It is all about expectations. As a club president/MD you have to be blunt with your competitors. Set the expectation that everyone is expected to help with setup, tear down, and stage re-setting. Then you need to re enforce that expectation. Here is what I have learned works good for my local club. We run about 40 USPSA matches a year, and another 50 or so (combined) IDPA, Steel, and 3gun matches. I never post a shooting start time. I always post setup start time. An example would be "Setup starts at 8 am and shooting as soon as the stages are ready". I ask for volunteers to manage construction for a bay and give them clear expectations on what I want built there. We only have 3 large bays to use so we normally double up on each bay. One large field course paired with a speed shoot or skills focused stage. As President/MD/RM I do not normally build stages -- My job is to float from bay to bay and make sure stages are being built. This is also when I work with the stage designer to make changes to stages to make sure they comply with the current rules and do not suck. I always communicate with the stage designer to make sure they understand why the changes need to be made. As the match wraps up the President/MD/RM does not help with tear down. I am working on scoring and taking note of the people who shoot and scoot. With Practiscore my goal is to have scores posted before I leave the range. We have a trailer for each bay that holds all the props for the stages in the bay. This way all tear down consists of is putting props on the trailer. The next step is the hardest because it involves confrontation. Those competitors that continually do not help the President/MD/RM has to call them out on their behavior. This goes beyond setup and tear down. I have been known to hand out pasters and offer a practical demonstration on their use.There are two types of competitors at the club level Users and Doers. A little work and bluntness combined with courtesy will go a long way to convert your Users into Doers. Alternatively the Users will find another sport with less expectations -- like Trap or Steel Challenge. If the above does not work find a "heavy". Everyone knows that person in your club that does not have a filter and get them to do your dirty work. Peer pressure is a great thing make it work for you. Deliver a great product. Lets face it we have all shot club matches that sucked. As a Club President/MD/RM if you put on a great club match with challenging stages your competitors will want to come to your match and getting them to work with be much easier. This is what has worked for my local club. In five years we went from nothing to 65% of the mission count for Iowa. Scott Arnburg

According to the rule book for initial classifications scores under 2% are not used. This is on page V under the classification system, right in the front of the book.

2016 USPSA Iowa Section ChampionshipSeptember 16-18, 201610 Stages + ChronoRound count 213Match fee $50USPSA level 2 match (applied) Plaques only matchLunches can be purchased through Practiscore.Registration: https://practiscore.com/2016-uspsa-iowa-section-championship/register

The daily schedule and squad matrix have been posted on the A3 website.

Stages are posted! http://www.uspsa3.com/Stages.html Scott

Registration Update 7/1/2016 366 Total Competitors! Carry Optics - 7 Limited -121 Limited 10 - 3 Open - 85 Production - 112 Revolver - 6 Single Stack - 32 PCC is an available division for the Area 3 Championship, registration has been updated to add the option. Scott

The stages are approved and posted on our website. http://uspsa3.com/Stages.html We are up to 365 competitors - biggest Area 3 ever! There are still some spots left in the match. Scott

The Area 3 Championship is a month away and we are up to 356 registered competitors. This is going to be the biggest Area 3 in a long time! Limited – 118 (5 GM) Carry Optics – 7 (0 GM) Limited 10 – 3 (0 GM) Open – 88 (12 GM) Production – 110 (3 GM) Revolver – 6 (1 GM) Single Stack – 31 (1 GM) Do not be left out Register Today! https://practiscore.com/2016-uspsa-hornady-area-3-…/register

I have been shooting Production for the last year because there is meaningful competition in the division. The last club match had 36 competitors and 24 in Production. I have guns and gear for every division except Single Stack, but whats the point of shooing in a division with 4 or less competitors?

Wow what a terrible article. It is full of 2nd hand observations and outright falsehoods. Example: "No competitive shooting governing body I’m aware of allows rounds to be caught in any way — they must be ejected onto the ground." I had to check make sure it was not an article from The Onion or some other comedy website. This is an old conversation. If the competitor chooses to flip and catch the round it is on them if they screw up and DQ. Not sure why this thread keeps getting resurrected every few weeks.

We have used PS and Stripe for last 2 years with no problems. If I could go to all online payments of match fee's I would. It is one less thing I have to deal with match day. Scott

Solo 1000

January 15-17: Florida State Championship, Frostproof, FL February 06-07: 2016 Dixie Cup Championship, St George, UT <need match URL> sign up here 18-21: 2016 Florida Open, Frostproof, FL 27-28: 2nd annual Bad Beat Shoot Out, Henderson, NV March 02-06: Rio Salado Desert Classic/Area 2 Championship, Mesa, AZ 11-12: 2016 Alabama Sectional Championship, Dothan, AL 17-20: Taran Tactical Innovations 2016 Zion Classic, St George, UT <need match URL> sign up here 31-03: 2016 IPSC Jamaica Invitational Pistol Tournament (JIPT), Kingston, Jamaica April 01-03: 2016 IPSC Jamaica Invitational Pistol Tournament (JIPT), Kingston, Jamaica 01-03: JABS Extreme Steel Target Challenge, Dothan, AL <need match url> sign up here 07-09: South Carolina State Championship, Charleston, SC 08-09: Battle in the Bluegrass VII, Wilmore, KY. 09-09: TAC-5 Challenge Richmond, KS 08-10: Iron Outlaw Steel Match, Fredericksburg,VA 09-10: 2016 Berry's Steel Open, St George, UT 21-24: FNH USA 2016 Area 6 Championship,Covington,GA 22-24: 2016 Indiana SS PRO REV State Championship, Atlanta, IN <need match URL> Sign Up Here May 04-07: 2016 Single Stack Classic/USPSA Single Stack Nationals, Barry, IL 07-07: 2016 Cowtown Classic, Cresson, TX 08-08: 2016 USPSA Revolver Nationals, Barry, IL 11-15: USPSA Area 1 Championship, Salt Lake City, UT 20-22: USPSA VA/MD Sectional, Fredericksbug,VA <need match url> sign up here 27-29: 2016 Ohio CK Arms Buckeye Blast (will post sign up link when active) sign up here 29-31: EEO 2016 Prematch, Hodonice,Czech Republic June 02-04: EEO 2016 Main Match, Hodonice,Czech Republic 03-05: The Infinity US Open,Cresson, TX 03-05: Rocky Mountain 300, Eaton CA 10-12: The STI Double Tap Championship 2016, Wichita Falls, TX <need match URL> sign up here 17-19: Mile High Showdown, Ramah CO 25-26: Briley West Coast Steel Championships, Piru, CA July 09-10: USPSA Area 7 Championship, Augusta, ME 15-17: 2016 FAS & Furious Alaska Sectional, Fairbanks, AK 28-31: 2016 Jamaica Cup (Handgun) - IPSC Level 3 Match, May Pen, Jamaica August 05-07: 2016 Michigan Sectional, Brooklyn,MI 11-13: USPSA Production Nationals, Barry, IL 14-14: USPSA Carry Optic Nationals, Barry, IL 18-21: USPSA Area 5 Championship, Lodi, WI 25-27: World Speed Shooting Championships, San Luis Obispo, CA 27-28: Georgia State Championship, Dawsonville, GA September 01-04: Oil Field Classic, Bellville, TX 16-18: Tennessee Atomic Blast, Tennessee Sectional, Oak Ridge TN 16-18: IPSC Nationals, Frostproof, FL 16-18: 2016 Iowa Section Championship, Elkhart IA 23-25: East Coast Regional Steel Challenge Championship, Orefield, Pa 30-02: Western PA Section, North Versailles, PA <need match URL> October 02-04: USPSA Limited Nationals, Frostproof FL 06-08: USPSA Open / L10 Nationals, Frostproof, FL 28-30: Silver Bullet Production/Single Stack Championship, Reno NV November 26-27: 2016 Woodleigh Fast and Furious (Handgun) - IPSC Level 3 Match, May Pen, Jamaica December Edit: added Iowa Section match

What mount are you using?

I have been using the Safariland 4555 Shooters range bag. It nicely fits 2 guns mags and everything I need for a match. http://www.safariland.com/julie-golobs-gear/4555-shooters-range-bag-1114015.html

I had the same problem. Called Dillon their first question was what dies are you using. I was using the EGW U-die, switched to a Dillon die and problem went away. Scott

Sure, but does the people that make the decisions read this? This is all stuff I have shareed with my AD at length. I am looking for some input from people outside the Iowa section and Area 3. Scott Arnburg