Truckin_Thumper

both my C and F will slide fwd on a mag swap, just treat like a hooker and smack it a bit harder, they both like that

IF you are going to mill it, I would send it to Fire4effect. If you dont want to mill it, go with the CZC universal adapter plate Do the ProPackage from CGW Hennings baspads and Grams follower/Springs

all of them?

I wanna see the other parts before I commit to an answer

For Production, the outside needs about 1.5mm taken off to fit in the box, nothing on the outside for CO. To use the actual slide lock, there is a lot of material that needs to come off the inside.

I have one on a Shadow 1 and an SP-01 SP-01 needed some tuning to the tab in order to fit. The S1 needed nothing to fit. As for actually locking back the slide, it needs some work and I grew tired of hand filing and gave up. LOL

They are legal for Production too, but it is about 1mm too wide, so alter it. If you mod the fin, it will infact lock the slide.

I use the decapper/sizer and it works much better than Lee. I can take the buldge out of Glock cases, I have a 95.5% success rate vs 75% using Lee (resizing). To me it is worth it as one of my CZs is picky on sizing.

I have no wife or kids.....LOL

I picked up some TiteGroup today. 8lbs, so I will be using this till July of 2020. Looking at some 135gr Berrys bullets.....any y'all use this recipe?

Contact Ally Outfitters and see what they can do for you. Tell em I sent ya https://www.allyoutfitters.com/

yup, seems the adj. moved. Not internal though. Doing more experiment on it. " Having a second helps to see what the deal is too. Now I gotta shot em both.... LOL

No that is not how this works....LOL Shadow trigger is much better than a stock 75c. HOWEVER, to get either super nice times some polishing and some parts. They can be as good as each other, but not stock. All my 75 series are very close to 2lb SA and 4-4.5 in DA, but it took parts and love to get them there. Best system for SA/DA I have found out of all the brands, Sig would run a close second. 1911 is still king, so there is that comparison if you so choose.

Thats a winner! And true,

Damn, wish I would have found this sooner...I had to fit one to an SP-01 and it really needs fitting on the Shadow 1 too, but can fit without (for now). You can see some shiny stuff on the left side, just where my thumb is. The slide rail would catch that, I had to file off about 1mm of metal. I need to do about half of that for teh Shadow 1, but it you tap out the safety, it clears it. I am assuming once it gets broke in, I will have to remove some material. Or Not. This is the wide safety from CZC. P.S. I love it.

oh, well, sorry, I dont even like to go ti Indiana when I am getting paid, so, thats good to know LOL

I dont think wide/narrow has anything to do with it, but I could be wrong. I think it is the cut itself, along with the angle. I also know it changes a lot of "feel" in the actual trigger an pull. Better? Worse? I dunno, I will say different. I like the feel the race hammer gives the over all pull/feel, but it adds a bit more freeplay, but eases the pull, but not by much. Stock hammer, reduces the freeplay, smoother on the first notch, but a bit longer, but not by much. I will be out around Fayetteville sometime this month, thinking around the 21st. Going to try and run a match while on vacation, and to see a buddy out there. I will have both my my CZs with me, so you can see/feel what I am talking about.

I am building a second rig for CO, and this is what I went with. Delv it was $929 with the extra wide safety. Gun was $829. I was pretty happy with that price.....until I ordered more crap. LOL Nitro Fin, SRO, CZC adapter plate, LOK grips, springs, etc.. So now I have an S1 and an SP-01 for CO. I have had an S2 also. I honestly cant tell too much difference between the three. For the most part and surely not at all while shooting. If I had to give an advantage to one of them, I would give it to the Shadow 2. It only needs a couple of springs to run top notch. SP-01 needs a few hundred $ in parts and some polishing Shadow 1 only needs a few springs and some polishing, along with an extended FP (assuming running the low end of power factor). If you base them all on the following, they are all equal once you are done with them Good trigger - all three can feel very close to each other, easy 2# SA, and 4# DA. Smooth etc. Grips, everyones hands are different, so all three need that. All three end up being close in total cost once done. So, for those that cant or dont want to work on your own stuff, the Shadow 2 wins. Everyone else, your call

or Carry Optics if you want to just be bland about it. Since the bastard child of USPSA is starting to blossom pretty well, toss in some new gun rulings, and people making aftermarket stuff, there has to be some creative toys. I will start with this ugly sumbitch.... Non milled slide ---poors SP-01---- pretty close to poors SRO 5 MOA ---Not poors or True Open CGW internals ----not so poors Hennings basepads with nickle mags and Grams guts ----True Open fashion Nitro Fin by Shooting Sports Innov.---- Open Thumbrest not poors Wide CZC Safety ----2nd Open Thumbrest---not poors. I really like this division by the way. I have more fun doing this than Open. Cheaper too (hence Open Poors).

or just a complete second setup. LOL. I wont say back up, as it depends on what fashion statement I want to project for that match I have had Vortex, DPP, Holosun, CMore, and have now settled on the SRO. Vortex durability is pure s#!t. CMore is by far the only one I have not had a single issue with, but it was frame mounted. The others are pretty equal. But I like the SRO as it is as close to the window of a CMore.

also known as Czrach LOL

I have access to the alignment tool, or I will get Dillon to send me one with the new part. it still works, I just have to bump the thing to get it to finish the last 2 mm

I am just as confused as the beginning of the thread....LOL But it looks like Sport Pistol is in the lead

If you dont mind running around with a cooler of ice/water on your back, they have to for motorcycles too. LOL