yigal

can u make pic. how it looks after u fixed it? (feed ramp,breech face and extractor) put back the original spring as M.M said.

o.k. that is correct . only few shooters that i know have this " problem". but it not fit ipsc standard box.

http://seboweapons.com/en/cz-pistols/84-cz-75-tactical-sports.html http://seboweapons.com/en/cz-pistols/84-cz-75-tactical-sports.html they sale ts with shadow 2 safety

+1 few tso in ours club 9mm. loose that tight fit after 10 000 rounds .slide rails dim. was 22.35mm from the box. now its 22.26mm after 1 year . and they now have vertical play 0.45mm. (one of them replaced by distributor to new.) original thumb rest perfectly design for square fingers everybody remove it and use others or none. liked frame reduction that u done for ts.very accurate work. u can add checkering at the back side and stippling on front.but if u use tape its o.k. but i like tso grip better than ts with thin al. grips with tape.

Mine had feeding problems when I put the mag release button on the right, because the mag release notches in the magazine tubes are staggered for reasons unbeknownst. After returning the mag release button to the left, Veronika II, as my CzechMate is known, started feeding reliably again. that i find on this forum :czechmate double feed posted april 25 Quote

u are wright. the situation is much worst than u think.

THANK U i don't know how upload pic.to this forum. i have pic. in computer and they too big for forum.

thank u. yes its 4 pic. 2 with shadow -2 with broken frame and 2 with cracks in same place. but i can see it . don't know why others don't.

o.k. but i saw pic. 9x19 with the same type port. if somebody will order tan. and want port like on cz how to define it to Massimo tan.?

o.k. but i saw pic. 9x19 with the same type port. if somebody will order tan. and want port like on cz how to define it to Massimo tan.?

sorry i didn't explain this good. i mean compare to cz ts and all cz ejection ports. i can see in pic. part of locking lug exposed from the barrel .

why this tan. has very enlarged ejection port? only half of first lug and second hold stress. the gun looks awesome but from side of ejection port

all 4 of them in same place. bad batch or f.. in design? or shooter pull trigger too hard. if its problem with design there is simple way fix it.

u are wright . you can solve this problem your way too . i made this trial on model and saw that small changes on upper side of disco still force trigger working as it was designed. but if u remove over too much trigger will work inconsistently .

in ours shooting club 2 shooters install the lite spring for 5.5 l da. with 11.5 main spring in shadow2. one never don't has any lite strikes and the other has 1 mf for every 150 r wit hard primers only. but now they can't enjoy because both of them cracked frames.

thank u for pic, look at notches for magazin catch. they are not on same level.! difference is ~2mm. it means that if u left handed shooter and change the magazin catch to right side probably u will have sometimes feed problems and some other issues 'because now magazin seats lower by 2mm. magazin catch perfectly symmetric . and your limited gun will not get in ipsc standard box. they revenge all lefties . or their designers use their heads only for eating. all cz magazines for ts and shadow have this from the beginning. i find this almost year ago and ask cz .they ignore and didn't reply .

muncie21 can you make pic. of this mags from front side please?

they don't use cheap steel: for frames and slides and all their parts. but they loose in reliability vs cz. that they must improve . and there is many ways do this.

cz shadow2 will work out of the box and trigger is good but in long terms i don't know what the frame material . it looks that they use recycled cars i know that tanfoglio has better metal. pic. of shadow2 frame after 10 000 115 grain factory loads p.f 132-135 (and this is not the only one.) tan. limited pro with the same ammo still shoots after 30 000 r. like new.

it looks like original parts for cz .( don't know about others.) maybe they made from real gold specially for us market.

now u have good toy for many years. i use in my toy buffer to prevent metal to metal contact. i use it 10 years and it works 100% and didn't replace nothing .only put race hammer and change slm. barrels every 25 000 r.

very good! that u find the problem . this type of extractor have tendency breaks at edges when u force them overcome the shell. did u done polish at the entrance to chamber?