Jump to content
Brian Enos's Forums... Maku mozo!

SoCalShooter69

Classifieds
 View Profile  See their activity

  • Posts

    332

  • Joined

  • Last visited

 Content Type 

Everything posted by SoCalShooter69

  1. SoCalShooter69
    Here's my S3 with crushed silver mixed with blue metallic. I will say, I enjoy my S2 more. One is with flash on vs flash off.
  2. SoCalShooter69
    Truth. Run a titan, bolo, and only use the post travel screw. You'll never get this with using the pre and post travel screws only:
  3. SoCalShooter69
    Just the sear. But get the eaa one, not the xtreme.
  4. SoCalShooter69
    What parts did you install? With the current offerings of parts, there's no need to clip the plunger spring, or replace it. You'll get a better, more reliable trigger with; titan, one piece sear (which you have), bolo, and PD FP and hammer spring.
  5. SoCalShooter69
    Why are you changing the plunger spring?
  6. SoCalShooter69
    Call Bevin tomorrow. He'll get you straight asap.
  7. SoCalShooter69
    One piece sear. Call or contact the shop, or me, if you have any issues, but it should all drip right in!
  8. SoCalShooter69
    The bolo won't actually sit down on the trigger bar enough to function in DA. A very simple mod if you have a Gen 2 trigger bar. Email or call the shop with any questions or concerns.
  9. SoCalShooter69
    I'd go with a racker and regular mount from Grauffel. Then, take the pretravel screw out, and put in a titan hammer and bolo.
  10. SoCalShooter69
    Lol
  11. SoCalShooter69
    Interesting. Keep us in the loop. Good call, DougM!
  12. SoCalShooter69
    Sorry, I had johns post in my head, when replying. Here's how the OP should have gone: I have a buddy that is having reset issues (list symptoms). He is left handed and switched the mag release. He switched the mag release back to how it's supposed to be intalled, originally, and the problem goes away. Can the mag release be switched or modified?
  13. SoCalShooter69
    Some poor chap(s) will read this thread, and think the bolo will cause feed(ing) issues, because you fail to even think that switching the mag release is the cause of the problem. We're all here to help, but sometimes people need to read their OP out loud to see if it makes sense, before hitting the submit button.
  14. SoCalShooter69
    On a feeding problem, that the shooter switched the mag release?!!! How is that even remotely related to the trigger system, let alone the bolo? I got a good laugh out of this thread. Enos forum will blame the bolo for anything. Lol
  15. SoCalShooter69
    I'll bet 98% you need to get the barrel reamed. Do your 10mm ammo plunk and spin, then drop freely? I'll bet 1% you need to check your FPB/Firing pin. I'll bet 0.5% you're possibly not going back into full battery. I'll bet 0.5% your primers aren't deep enough. 2nd strike is 99% primer depth.
  16. SoCalShooter69
    So basically this has/had absolutely nothing to do with the bolo, but we're blaming the bolo in post 1. Switch the mag release back, my man!
  17. SoCalShooter69
    Gents; here is a quick guide if you receive your Tanfo with a Gen 2 trigger bar, and you've ordered a bolo/titan/1-piece sear. You'll only need to remove .020", so go slow and measure often. It doesn't take much using a rotary and diamond bit.
  18. SoCalShooter69
    Where specifically did he remove material from? SA reset comes from the amount of the curve on the disco. So I'll need a little more information to diagnoses the issue. Is his sear spring bent? Was his gun really dirty? There are a bunch of things that can cause a failure to reset in SA... Removing .006 off the nose won't effect SA with the bolo.
  19. SoCalShooter69
    The TS has a mono trigger bar specifically designed for SAO, with a better hammer. A sp01 ran in SAO is typically void of the disco. That being said, you could run a sp01 with a t3 disco and comp hammer and get a trigger close to a TS. That being said, the capacity shortcoming of the sp01 makes it a poor choice over the TS for limited.
  20. SoCalShooter69
    Jump down to 124RN and it'll close up.
  21. SoCalShooter69
    Probably the best post in this thread.
  22. SoCalShooter69
    Do you ask your boyfriend to tie your shoes in the morning, before you leave the house?
  23. SoCalShooter69
    I've been where you're trying to go with the Lee single stage. It is impossible. Also, Good advice to check your firing pin block and firing pin for drag marks.
  24. SoCalShooter69
    As for the press - that single stage press is not capable of seating primers to the depth you need them. I started on the Lee single; been there, done that, participated in it. If you've been able to keep the single lee running okay, you'll do just fine with a Loadmaster. The stock disco isn't a fine tuned piece, as in, you can't put a supercharger in a corvette and expect it to run just as good on the '87 gas you've been using. We've all been there, and there has been extensive discussion about bolo vs. primer depth and reliability.
  25. SoCalShooter69
    That press is your issue. Primers not deep enough. I wouldn't mod the bolo anymore; that's not the issue.
×
×
  • Create New...