GR8GIFT
Classified-
Posts
85 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by GR8GIFT
-
Strong Mont for a 650?
GR8GIFT replied to IGOTGLOCKED's topic in Dillon Precision Reloading Equipment
I didn't like the way the press was mounted on my bench. The mounts solved the problem for my and they are more stable at least for me. -
Strong Mont for a 650?
GR8GIFT replied to IGOTGLOCKED's topic in Dillon Precision Reloading Equipment
I used a 650 without the strong mount. Bought the strong mount and it's just as stable with it. I have strong mounts for both my 650's and my 550. -
You could probably buy new 650 and just conversions you want for that.
-
Dillon SDB or 550b (9mm only)
GR8GIFT replied to fireman1776's topic in Dillon Precision Reloading Equipment
No it's a different setup. I currently use a 550 with no case feeder for 9mm. However I use 2 650's 1 large primer setup for 45 ACP, one small primer setup for 38 special. I have the 650 case feeder and just put it on the 650 I'm loading on. I also use the 550 for small lots of rifle ammo. -
Dillon SDB or 550b (9mm only)
GR8GIFT replied to fireman1776's topic in Dillon Precision Reloading Equipment
If 650 is out. I'd go with 550. You can add calibers and case feeder later if you want. -
I used a single stage RCBS Rock chucker for years. Always wanted a Star Loader with a case feeder. Decided on a Dillon 650 loved it added a case feeder and it's even better. Hated changing primer sizes from large to small. So I bought a second 650 now I have 2 set up one large primer one small primer and share the case feeder between them. My brother gave me a 550 he never used that he had bought second hand. I returned to to Dillon an had it refurbished it came back looking like a new press. I use the 550 for small runs of rifle ammo and test loads for my handguns. I'd start with the 650 with a case feeder and never look back. I still use the Rock Chucker sometimes.
-
2nd press... another 550B or upgrade to xl650
GR8GIFT replied to 78Staff's topic in Dillon Precision Reloading Equipment
Well I use a 550 set up for small primers for small runs of 9mm and .223, I have 2 650's one for small primers, One for large primers with a case feeder that I can share between the 650's. The 650's are great for larger volume loading. Although I usually just load a 500-1000 at a time on them. Usually a couple of hundred on the 550. I like the 650's easy caliber changes especially when you don't have to switch out the primer feed. -
Dillon 650 and 9mm cases falling
GR8GIFT replied to shtr3's topic in Dillon Precision Reloading Equipment
That's why I have 2 650/s one for small primers one for large primers. Also have a 550 for small lots of rifle ammo. -
Dillon is the best for sure. Sent in my old 550 with the same results. Looked brand new when it returned. Maybe my 2 650's will get a trip back for overhauls some day.
-
I don't need a new press...
GR8GIFT replied to TightLines's topic in Dillon Precision Reloading Equipment
I think you'll be very happy with your 650. I have 2 one set up for large primers and one for small primers. Saves me from changing anything but the tool heads when I switch calibers. I share one case feeder between them. I do use a 550 for small batches of rifle loads. At present I am loading .45 ACP and .38 Special on my 650's and 9mm on the 550. -
I prefer the 650's I have one for large primers and one for small. I share a case feeder it's easy to switch to the loader I'm using. I also have a 550 set up for small primers I use for small batches of 9mm and .223.
-
Two 650s with one Case Feeder?
GR8GIFT replied to Charles Appel's topic in Dillon Precision Reloading Equipment
I share a case feeder with my 2 650's one set for 38 special and one for .45 ACP with no problems. You shouldn't have any problems. -
What ShadoFann said.
-
Current Lead Times for Dillon Machines
GR8GIFT replied to beltjones's topic in Dillon Precision Reloading Equipment
It's been to long since I ordered for me to remember. Especially since the run on reloading equipment during the last year. However long it is, be assured it's well worth the wait! -
Dillon 650 inconsistent powder drop
GR8GIFT replied to Maks_H's topic in Dillon Precision Reloading Equipment
I have found my Dillon powder check pretty much only shows no powder or a double charge. If somehow you're only a grain or so over/under most likely it won't alarm. My main worry is a double charge or no powder so it does what I need. -
Anyone else lowered their 650 case feeder?
GR8GIFT replied to Brassaholic13's topic in Dillon Precision Reloading Equipment
I share one case feeder with my 2 650's also. I just lift it over to the one I'm using and change the case feed plate if needed. Plus one is for small primers the other for large primers. -
worth going from 650 to 1050?
GR8GIFT replied to fastarget's topic in Dillon Precision Reloading Equipment
I have 2 650's one for large primers and one for small primers. I am planning on using my old 550 for .223/5.56mm/. I have loaded on my father in laws 1050 but still prefer my 650's. I don't feel the need to load any faster than the 650's run. I have considered bullet feeders but I really don't have any reason to pay the price for the good ones. Although I like the looks of the GSI bullet feeders you can check them out online with a google search. I would be a neat gaget/add on but not worth the price to me. -
Just because I didn't list it. A powder check for the caliber you're loading if you go with the 650 press. I use them on my 650's.
-
If you get the 650 or 550 you need the following items: The press of your choice set up for the caliber you're loading Dies for the caliber you're loading A powder scale to set up your powder measure A primer tray to flip your primers Nice add to add on to a 650: Bullet Tray Case Feeder for the caliber you're loading Roller Handle I have a 550, and 2 650's one for small primers one for large primers saves time for caliber changes. The 650's share a case feeder.
-
How about a link to the workbench or part number? Thanks!
-
Powder check issues on a super 1050
GR8GIFT replied to jn1897's topic in Dillon Precision Reloading Equipment
Try this link to the powder check instructions: http://www.dillonhelp.com/manuals/english/Powdercheck-System-Instructions-May-2007.pdf Powdercheck-System-Instructions-May-2007.pdf -
650 large primer system
GR8GIFT replied to Grumpy's Toy's topic in Dillon Precision Reloading Equipment
Just do what I did. 2 650's one for large primers and one for small and share a casefeeder. No more problems switching from large to small primers! -
The 650's are great machines I can go through 100 rounds of 45 in about 7 to 8 minutes when I'm in the grove. I usually start with 5 full primer tubes open a box of 500 cast 200 gr swc's and usually have and empty box in under 40 minutes that's without a bullet feeder. I don't have any crimped brass to worry about so I'v never felt the need for a 1050, even though I've used one at my father in laws house. The 650's are all I need one for large and one for small primers. So I never have to mess with changing out the primer feed. I only do that on my one 550 for small bunches of rifle ammo.