Loves2Shoot

Having a 2 years supply is prudent these days.

I bought one of these along with a recoil spring kit. I took it out to the range and blasted away 6 rounds at a time as fast as I could. I was really surprised at the difference. It's now my favorite trick... I just aim a little about 2" right of center and can put 6 in the A zone (almost) every time now. I wish someone could explain what the two weights and the little spring do... All I know is it works. It keep the guide rod in the legal weight for USPSA and absorbs energy as you shoot.

Yes, we've looked at it and we already make a rail mounted scope mount for a customer. Their is a well known Glock shooter who is running a light casing filled with weight on his Limited gun, and the XDM lower rail is stiffer than the Glock. When we get around to it, it will likely be the same brass that we make our big magwells out of.

We've had good feedback from customers so far on the harder primers.

We changed the tip geometry to focus the energy in a small area. We have photos of striker in our webstore.

Not at all. Melonite is not hard to cut through if you have the right set of skills and equipment.

It is easier if you make a slave pin. I use a roll pin instead of the factory pin.

If you can afford the ammo to wear it out, you can afford to replace it when it wears out...

Friction. If you look at the open end, you will notice profiled "wings" that trap the front of the magazine.

No, they sit (like the magazine) below the ejection port and there is enough room between the magazines for the dust cover to open if closed.

Henning is going to send me some grips.

Me either, but it worked.

Not likely unless we have a commercial customer who wants them.

Our new no tool extra capacity coupler (+4-5) is in from anodizing and ready to ship. Visit our Facebook page for a chance to win one. http://shop.springerprecision.com/product.sc?productId=293&categoryId=21

I'll see if Henning wants to do that.

We have versions for the 16, 17 and 18 so just select the capacity that fits your mag. They make them the same length as the factory 18, so they fit in the box. I'm not sure what the grip tape question is. I have 2 ten round magazines that came with my pistol, which base does it need. There was someone above asking about the grip tape that was in a picture on this thread. Can you post a photo? There are 2 types that I know of.

We have versions for the 16, 17 and 18 so just select the capacity that fits your mag. They make them the same length as the factory 18, so they fit in the box. I'm not sure what the grip tape question is.

Rubber Grit

http://shop.springerprecision.com/category.sc?categoryId=42 Available for the P07 in grit and rubber.

Nice!

Was this what you had in mind? http://tarantacticalinnovations.com/index.php?main_page=product_info&cPath=44_49&products_id=218 The +300's don't fit in the USPSA/IDPA box. How tall are the ones you linked?

You can, but it won't be the right height.