Cowboy_Ninja Posted December 9, 2023 Share Posted December 9, 2023 Anybody running their czechmate in LO? are you running an optic plate or have it milled? Would it be sacrilege to mill a czechmate? Link to comment Share on other sites More sharing options...
shred Posted December 9, 2023 Share Posted December 9, 2023 I looked at it briefly, then sold the CM. There's not a lot of slide width at the back of a Czechmate, so you'd probably need a plate system of some sort for the wider dots. Link to comment Share on other sites More sharing options...
old558 Posted December 9, 2023 Share Posted December 9, 2023 I saw one with a rear sight plate mount. Link to comment Share on other sites More sharing options...
shred Posted December 9, 2023 Share Posted December 9, 2023 Yeah, you can do that with a LPA plate I think. Link to comment Share on other sites More sharing options...
old558 Posted December 9, 2023 Share Posted December 9, 2023 CZ custom has a multi optic plate for the Tactical sport Link to comment Share on other sites More sharing options...
asierra350 Posted December 10, 2023 Share Posted December 10, 2023 I had a TSO milled for an SRO with some slide lightening, I’ve been really considering doing the same with my Czechmate, I’d like to see if the sightblock makes any difference Link to comment Share on other sites More sharing options...
aandabooks Posted December 11, 2023 Share Posted December 11, 2023 4 hours ago, asierra350 said: I had a TSO milled for an SRO with some slide lightening, I’ve been really considering doing the same with my Czechmate, I’d like to see if the sightblock makes any difference Who did you have mill your slide? Did you have a plate installed? Link to comment Share on other sites More sharing options...
asierra350 Posted December 11, 2023 Share Posted December 11, 2023 Stonebridge Gunworks milled for optic, no plate, SRO is a direct mount Link to comment Share on other sites More sharing options...
asierra350 Posted December 13, 2023 Share Posted December 13, 2023 Got it back and put together, looking forward to trying it out. Link to comment Share on other sites More sharing options...
LDRIDER Posted December 13, 2023 Share Posted December 13, 2023 Thats a nice fit. It should be L/O contender. I love my CZ/SRO for L/O. Link to comment Share on other sites More sharing options...
dogtired Posted December 30, 2023 Share Posted December 30, 2023 I had CZC mill a TS2 for a RMR plate. Plenty of performance for half the cost of a Czechmate. I also have a Czechmate and don’t see the slide mounted optic as an advantage over the frame mounted one for open. Link to comment Share on other sites More sharing options...
flyinverted Posted January 15 Share Posted January 15 Before I ran my CM in Open, I ran it in LO. Not wanting to mill the slide, I just used rear dovetail plate for an SRO. Gave me the ability to attach a racker there too. Link to comment Share on other sites More sharing options...
old558 Posted January 16 Share Posted January 16 17 hours ago, flyinverted said: Before I ran my CM in Open, I ran it in LO. Not wanting to mill the slide, I just used rear dovetail plate for an SRO. Gave me the ability to attach a racker there too. How did you mount the slide racker? Picture please. Link to comment Share on other sites More sharing options...
flyinverted Posted January 17 Share Posted January 17 (edited) 21 hours ago, old558 said: How did you mount the slide racker? Picture please. I used a CZ customs blank plate and tapped it myself for an SRO. The side was thick enough, so I used what I had laying around. It's the stock bolt handle from a Ruger PC9. The *thumb rest [generic]* that fits the cutout in the frame where the optic mount usually goes is also from CZ Customs. Edited January 17 by flyinverted Link to comment Share on other sites More sharing options...
old558 Posted January 17 Share Posted January 17 2 hours ago, flyinverted said: I used a CZ customs blank plate and tapped it myself for an SRO. The side was thick enough, so I used what I had laying around. It's the stock bolt handle from a Ruger PC9. The *thumb rest [generic]* that fits the cutout in the frame where the optic mount usually goes is also from CZ Customs. Thank you Link to comment Share on other sites More sharing options...
Michaelsabre Posted January 17 Share Posted January 17 CZC is milling my TS. Can't wait! Link to comment Share on other sites More sharing options...
kaseyj5056 Posted January 20 Share Posted January 20 The czechmate is the best option if you aren’t using a 2011 Link to comment Share on other sites More sharing options...
Michaelsabre Posted February 15 Share Posted February 15 Slide comes back from CZC. Love it. Link to comment Share on other sites More sharing options...
Michaelsabre Posted February 15 Share Posted February 15 It's an original CZ TS I got long long times ago. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now