OPENB Posted August 10, 2023 Share Posted August 10, 2023 Just saw Impact Machine has Prodigy RMR plates. I just ordered one, no idea how they compare to the AOS or CHP plates. But for $70 shipped, I'll try one. Link to comment Share on other sites More sharing options...
Kevrend Posted August 14, 2023 Share Posted August 14, 2023 Pretty sure they are or were Blem versions but I snagged one also and I’m content with it. Still waiting on a 507 Comp to show up, but the fit and finish of the plate is up to par with all expectations and looks like it flares out from the slide to the optic dimensions cleanly. Replaces u notch rear sight with a square notch rear of same height. Also comes with two sets of different length screws for trijicon or for holosun mounting. For $70 it’s a win. Link to comment Share on other sites More sharing options...
OPENB Posted August 14, 2023 Author Share Posted August 14, 2023 31 minutes ago, Kevrend said: Pretty sure they are or were Blem versions but I snagged one also and I’m content with it. Still waiting on a 507 Comp to show up, but the fit and finish of the plate is up to par with all expectations and looks like it flares out from the slide to the optic dimensions cleanly. Replaces u notch rear sight with a square notch rear of same height. Also comes with two sets of different length screws for trijicon or for holosun mounting. For $70 it’s a win. Nice, mine arrives today. Link to comment Share on other sites More sharing options...
costeel Posted August 14, 2023 Share Posted August 14, 2023 Anyone working on a Sig Romeo XL plate yet? Link to comment Share on other sites More sharing options...
Jammer1911 Posted August 15, 2023 Share Posted August 15, 2023 That's for the heads up. I ordered my plate and shipped. Should be here Thursday! Link to comment Share on other sites More sharing options...
season94 Posted August 18, 2023 Share Posted August 18, 2023 Thanks for the heads up. I'll place my order today Link to comment Share on other sites More sharing options...
Jammer1911 Posted August 18, 2023 Share Posted August 18, 2023 Mine hasn't arrived. Usps said it was delivered back to originator. I've been trying to reach them since Wednesday. Called, emailed, texted. I've yet to get a response back. Link to comment Share on other sites More sharing options...
Jammer1911 Posted August 22, 2023 Share Posted August 22, 2023 Mine arrived yesterday. If these are bless I'm not seeing what makes them that. Fits beautiful and looks good. Link to comment Share on other sites More sharing options...
71Commander Posted August 25, 2023 Share Posted August 25, 2023 I've looked all over their site and can't find it. Link to comment Share on other sites More sharing options...
tt350z Posted August 25, 2023 Share Posted August 25, 2023 3 hours ago, 71Commander said: I've looked all over their site and can't find it. https://impactcncmachine.com/icm-prodigy-rmr-507-plate/ Link to comment Share on other sites More sharing options...
71Commander Posted August 26, 2023 Share Posted August 26, 2023 Thanks. I was looking on another site Link to comment Share on other sites More sharing options...
mmchambers06 Posted September 30, 2023 Share Posted September 30, 2023 On 8/25/2023 at 11:22 AM, tt350z said: https://impactcncmachine.com/icm-prodigy-rmr-507-plate/ Just got this guy in and mounted up. Happy with it for the $70 paid. One of the mounting holes is a tiny bit off center but didn't cause me any grief mounting it up. The Springfield plate is a bit nicer but definitely not $59 nicer. IM shipped super fast and came with extra screws for different optics. Link to comment Share on other sites More sharing options...
71Commander Posted October 1, 2023 Share Posted October 1, 2023 6 hours ago, mmchambers06 said: Just got this guy in and mounted up. Happy with it for the $70 paid. One of the mounting holes is a tiny bit off center but didn't cause me any grief mounting it up. The Springfield plate is a bit nicer but definitely not $59 nicer. IM shipped super fast and came with extra screws for different optics. Just as long as the screw head is flush, allowing the RMR to set completed seated. If not you might not be able to sight in the dot. Link to comment Share on other sites More sharing options...
mmchambers06 Posted October 1, 2023 Share Posted October 1, 2023 Yeah, it seated fully... no issues. Link to comment Share on other sites More sharing options...
hummerbk Posted October 3, 2023 Share Posted October 3, 2023 (edited) I bought one and discovered the sight notch is cut .013 too far to the right. It is also too high. The too high I could live with as it's a back up sight only but the few inches to the right is ridiculous. You can't compensate for that! Not to mention, at the last IDPA match, when I handed my pistol to my friends to check out they asked why the red dot doesn't align with the sights. I contacted Impact Machine and got no response. Crickets. Just ordered the RMR plate from Springfield. They are back in stock. I swear, sometimes it seems like I spend a dollar to save a penny! Edited October 4, 2023 by hummerbk update Link to comment Share on other sites More sharing options...
pcar157 Posted October 5, 2023 Share Posted October 5, 2023 On 10/3/2023 at 11:10 AM, hummerbk said: I bought one and discovered the sight notch is cut .013 too far to the right. It is also too high. The too high I could live with as it's a back up sight only but the few inches to the right is ridiculous. You can't compensate for that! Not to mention, at the last IDPA match, when I handed my pistol to my friends to check out they asked why the red dot doesn't align with the sights. I contacted Impact Machine and got no response. Crickets. Just ordered the RMR plate from Springfield. They are back in stock. I swear, sometimes it seems like I spend a dollar to save a penny! Be sure to give Scott Milam a phone call. He is usually very responsive customer service issues. Link to comment Share on other sites More sharing options...
hummerbk Posted October 5, 2023 Share Posted October 5, 2023 8 hours ago, pcar157 said: Be sure to give Scott Milam a phone call. He is usually very responsive customer service issues. Maybe so, but I'm done. I've already ordered a Springfield. Link to comment Share on other sites More sharing options...
Jammer1911 Posted October 6, 2023 Share Posted October 6, 2023 On 10/3/2023 at 11:10 AM, hummerbk said: I bought one and discovered the sight notch is cut .013 too far to the right. It is also too high. The too high I could live with as it's a back up sight only but the few inches to the right is ridiculous. You can't compensate for that! Not to mention, at the last IDPA match, when I handed my pistol to my friends to check out they asked why the red dot doesn't align with the sights. I contacted Impact Machine and got no response. Crickets. Just ordered the RMR plate from Springfield. They are back in stock. I swear, sometimes it seems like I spend a dollar to save a penny! I received mine after some delivery faux Paul's. It is a quality part and I'm happy with it. But I experienced the same issues with no response to phone calls, text messages or emails. It finally showed up but without any (zero, nada) communication. Link to comment Share on other sites More sharing options...
hummerbk Posted November 4, 2023 Share Posted November 4, 2023 Thought I would give an update to my issue with the Impact Machine Base plate. The sight was too far to the right and was shooting too high, about 4 inches too high and 4 inches too far right at 20 yards appx. There is no adjustment on this sight so you are stuck with it. I received my Springfield Plate and found it shoots 1.5 inches high and 1 inch left at 20 yards. I'm going to leave it there as I can deal with that. I'm using a red dot anyway and these are backup sights. The Springfield is adjustable for windage. They cost more but the aggravation factor is way less. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now