Fishbreath Posted August 14, 2023 Share Posted August 14, 2023 25 minutes ago, IHAVEGAS said: Anyway Dillon 1050, federal spp, I have adjusted depth to the point where I deform the primer on some range brass and on other mixed headstamp brass just drive it deep, for the wheel gun it is all the same brass so the dimple is consistent. One of these years I need to get a 1050/1100. Adjustable priming depth sounds nice, and is also probably a lot easier on the shoulder than primer seating on the 750. Link to comment Share on other sites More sharing options...
Joe4d Posted August 14, 2023 Share Posted August 14, 2023 I load on a Dillon 500, manual index and keep the shell plate fairly tight.. High primer wont turn.. Never think about them Link to comment Share on other sites More sharing options...
ddc Posted August 14, 2023 Share Posted August 14, 2023 42 minutes ago, Fishbreath said: One of these years I need to get a 1050/1100. Adjustable priming depth sounds nice, and is also probably a lot easier on the shoulder than primer seating on the 750. When I first got into reloading I was surprised to find out that primer depth was not adjustable on a 650. It is one of the things I really appreciate about the 1100. Link to comment Share on other sites More sharing options...
m700 Posted August 14, 2023 Share Posted August 14, 2023 17 minutes ago, ddc said: When I first got into reloading I was surprised to find out that primer depth was not adjustable on a 650. It is one of the things I really appreciate about the 1100. Its true that its nice to be able to control it. The downside is that it can be wrong. The 650 always gave me good depth. The 1100 has been fine for 5k so far for me but took a few minutes in the beginning to set. It does seem to hold very well. Link to comment Share on other sites More sharing options...
HesedTech Posted August 14, 2023 Share Posted August 14, 2023 2 hours ago, Fishbreath said: Adjustable priming depth sounds nice, and is also probably a lot easier on the shoulder than primer seating on the 750. The 750 primer depth can be adjusted, get this: https://www.armanov.com/shop/ibslxl750-index-bearing-cam-block-spring-loaded-for-dillon-xl750-668?category=63#attr= Years ago when I had a 650 I adjusted the depth by shimming the stop under the primer punch. Link to comment Share on other sites More sharing options...
Fishbreath Posted August 14, 2023 Share Posted August 14, 2023 I already have one, but it's still rough on the arm levering them in properly deep. Link to comment Share on other sites More sharing options...
Zachjet Posted August 14, 2023 Share Posted August 14, 2023 Till she won’t go in no more…. Link to comment Share on other sites More sharing options...
ysrracer Posted August 14, 2023 Share Posted August 14, 2023 4 hours ago, Zachjet said: Till she won’t go in no more…. Umm, agreed. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now