mrvip27 Posted May 20, 2023 Share Posted May 20, 2023 On 5/19/2023 at 5:30 AM, HOGRIDER said: Got a confirmation this am that I have/chose the S2 Standard Aggressive grip. Now that I think back about the day we tested, I can't imagine me needing anything more aggressive; especially shooting 9mm minor. Appreciate the follow up! Link to comment Share on other sites More sharing options...
RGC Posted May 23, 2023 Share Posted May 23, 2023 Just got the message that mine is finishing up this week. Likely sell my Rafferty 9mm open pistol then as its just not getting used but need a dot due to the eyes not what they used to be. Link to comment Share on other sites More sharing options...
HOGRIDER Posted May 23, 2023 Author Share Posted May 23, 2023 3 hours ago, RGC said: Just got the message that mine is finishing up this week. Likely sell my Rafferty 9mm open pistol then as its just not getting used but need a dot due to the eyes not what they used to be. In the same boat re: needing a "dot"! You'll love the DH9! Link to comment Share on other sites More sharing options...
HOGRIDER Posted May 27, 2023 Author Share Posted May 27, 2023 (edited) Thought it would be more appropriate to put my follow-up post in the Open Pistols section............. Edited May 27, 2023 by HOGRIDER sp Link to comment Share on other sites More sharing options...
mmchambers06 Posted June 2, 2023 Share Posted June 2, 2023 I got in line yesterday... Link to comment Share on other sites More sharing options...
mrvip27 Posted June 2, 2023 Share Posted June 2, 2023 5 hours ago, mmchambers06 said: I got in line yesterday... Spicy! I saw a post on instagram where dude got an S3 and he already wrapped it cause its super aggressive. Link to comment Share on other sites More sharing options...
mmchambers06 Posted June 2, 2023 Share Posted June 2, 2023 My hands are pretty calloused. Haven't laid hands on one, but I've never felt a grip in my life that I thought was too aggressive. Link to comment Share on other sites More sharing options...
redbarron06 Posted September 22, 2023 Share Posted September 22, 2023 Hey guys new here. How does the LOC shoot? I ordered mine back in May. Talked to them today and the builder has it right now. They say he turns about about 3-4 per week so hopefully I will have it by the time the govt shuts down. Link to comment Share on other sites More sharing options...
VeilAndrew Posted September 22, 2023 Share Posted September 22, 2023 I got my LOC last Wednesday. Ordered 4/12, in hand 9/13. The S3 aggressive grip is extremely aggressive. Has started to tear up my hands in dry fire pretty easily. As someone used to patriot defense grips on CZs, it's a welcome texture. Link to comment Share on other sites More sharing options...
redbarron06 Posted September 22, 2023 Share Posted September 22, 2023 Received this morning, ” Your build sheet has been started and will be in the final assmbly stages early next week. -- Thanks, Caleb“ I ordered on 17 May Grip Color: (SS) Black Grip Texture: S3 (Most Aggressive) Trigger Shoe Color: Blue Trigger Shoe Length: Short Frame/Slide Color: Silver Control Parts Color: Silver Barrel Color: Polished Silver Magwell Color: Black Optics Plate: Trijicon Slide Stop Type: Nitro Fin 2.0 - Silver Link to comment Share on other sites More sharing options...
mmchambers06 Posted September 22, 2023 Share Posted September 22, 2023 Nice, thanks I ordered June 1, so hopefully I'm just a couple weeks after you... Link to comment Share on other sites More sharing options...
mmchambers06 Posted September 22, 2023 Share Posted September 22, 2023 4 hours ago, VeilAndrew said: I got my LOC last Wednesday. Ordered 4/12, in hand 9/13. The S3 aggressive grip is extremely aggressive. Has started to tear up my hands in dry fire pretty easily. As someone used to patriot defense grips on CZs, it's a welcome texture. Nice, you'll have leather mitts before long. Link to comment Share on other sites More sharing options...
redbarron06 Posted September 22, 2023 Share Posted September 22, 2023 For those folks that have actually received one I have a couple of questions. Are the safeties the traditional angle or are they like the Atlas or Wilson high grip safeties? Also is it a standard spring plug or is it one of those with the key on top that fits under the barrel? The 2 upgrades I have been thinking about right out of the box are a tool-less guide rod and the Atlas high angle shielded safety. Link to comment Share on other sites More sharing options...
HOGRIDER Posted September 22, 2023 Author Share Posted September 22, 2023 4 minutes ago, redbarron06 said: For those folks that have actually received one I have a couple of questions. Are the safeties the traditional angle or are they like the Atlas or Wilson high grip safeties? Also is it a standard spring plug or is it one of those with the key on top that fits under the barrel? The 2 upgrades I have been thinking about right out of the box are a tool-less guide rod and the Atlas high angle shielded safety. For my LOC I ordered the Double Tap Ambi Shielded safety. IMO, it has the standard competition angle that fits my hand/thumb perfectly. I do ride the safety......... AFAIK, the LOC comes with a one piece guide rod and plug that takes an "L" shaped paper clip for takedown. I immediately replaced it with the Dawson 5" tool-less guide rod; and it has functioned flawlessly! Pics with my latest match load results.....it's definitely a shooter! Link to comment Share on other sites More sharing options...
redbarron06 Posted September 22, 2023 Share Posted September 22, 2023 I also ordered the shielded safeties as I ride the safety too. Especially one handed. I ordered the Dawson guide rod when I ordered the gun so I have that in hand already. Currently I am using it in my Bul but the Bul has the keyed spring cup. It still works but there is no rim to catch the guide rod so if you are not carful you can sling it across the room, or garage, or the range. I ordered mine with the C-More RTS2 12 MOA. Currently running the 507 Comp and love the bigger dot. Hopefully the 12 wont be too big. If it is I guess I’ll order the RMR plate from them and swap the 507 comp over. Link to comment Share on other sites More sharing options...
HOGRIDER Posted September 22, 2023 Author Share Posted September 22, 2023 Current config with a couple of subtle, personal changes........... Link to comment Share on other sites More sharing options...
redbarron06 Posted September 23, 2023 Share Posted September 23, 2023 Forgot to mention I am adding an oversize mag release. Not sure if I will use a BC or the Bul that is round with an off set hole to make fine adjustment. Link to comment Share on other sites More sharing options...
redbarron06 Posted September 25, 2023 Share Posted September 25, 2023 On 9/22/2023 at 4:40 PM, HOGRIDER said: Current config with a couple of subtle, personal changes........... Who makes that stand? Link to comment Share on other sites More sharing options...
Zachjet Posted September 25, 2023 Share Posted September 25, 2023 1 hour ago, redbarron06 said: Who makes that stand? LOk grips Link to comment Share on other sites More sharing options...
HOGRIDER Posted September 25, 2023 Author Share Posted September 25, 2023 1 hour ago, redbarron06 said: Who makes that stand? https://lokgrips.com/gun-stands/aluminum/gun-stand-raw-aluminum/ Link to comment Share on other sites More sharing options...
redbarron06 Posted September 25, 2023 Share Posted September 25, 2023 17 minutes ago, HOGRIDER said: https://lokgrips.com/gun-stands/aluminum/gun-stand-raw-aluminum/ I'm now on the wait list. Link to comment Share on other sites More sharing options...
mmchambers06 Posted October 31, 2023 Share Posted October 31, 2023 Entering week 22 here. Just got an update that they are waiting on steel grips to come back from the coater. Hopefully not too much longer. Link to comment Share on other sites More sharing options...
ddc Posted November 2, 2023 Share Posted November 2, 2023 On 10/31/2023 at 3:18 PM, mmchambers06 said: Entering week 22 here. Just got an update that they are waiting on steel grips to come back from the coater. Hopefully not too much longer. I ordered about the same time a you. Emailed a couple weeks ago and they also mentioned waiting on the grips. At that point they said possibly end of October. Apparently it is going to take a little longer. I'm not in a hurry (maybe just a little) I'd rather they take their time and do it right. Link to comment Share on other sites More sharing options...
ComputersAre8ad Posted November 10, 2023 Share Posted November 10, 2023 On 9/22/2023 at 2:28 PM, redbarron06 said: I ordered mine with the C-More RTS2 12 MOA. Currently running the 507 Comp and love the bigger dot. Hopefully the 12 wont be too big. If it is I guess I’ll order the RMR plate from them and swap the 507 comp over. I have a 10 MOA and it's big.. bordering too big anything over 10 yards for me. It is super bright at it's lowest but it is amazingly crisp. Hope it is to your liking! Link to comment Share on other sites More sharing options...
mmchambers06 Posted November 29, 2023 Share Posted November 29, 2023 On 11/2/2023 at 11:12 AM, ddc said: I'm not in a hurry (maybe just a little) I'd rather they take their time and do it right. Same. Any movement on yours? Week 26 here. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now