Racinready300ex Posted July 29, 2022 Share Posted July 29, 2022 I'd kind of like to try a couple popple holes in my trubor. Any recommendations on a decent place to send it that might not have a crazy long turn around time? Link to comment Share on other sites More sharing options...
Sarge Posted July 29, 2022 Share Posted July 29, 2022 Check out your local matches and see if there is a gunsmith nearby that knows his way around USPSA. Might get lucky. Link to comment Share on other sites More sharing options...
Racinready300ex Posted July 29, 2022 Author Share Posted July 29, 2022 I got up with Jeff Abernathy at Tommy guns, he's not to far away from here. I'm going to send it to him fast turn around reasonable price and I hear he does good work. Link to comment Share on other sites More sharing options...
zzt Posted July 29, 2022 Share Posted July 29, 2022 A couple of 3/16" poppels will rob 4-5 PF from your load. Chrono after to make sure you still make PF. Link to comment Share on other sites More sharing options...
jim vaughan Posted July 31, 2022 Share Posted July 31, 2022 You may not have good visibility through your scope after milling the holes. Keep this in mind. Link to comment Share on other sites More sharing options...
Sarge Posted July 31, 2022 Share Posted July 31, 2022 10 minutes ago, jim vaughan said: You may not have good visibility through your scope after milling the holes. Keep this in mind. Holes didn’t affect my visibility one bit. What are you basing you’re opinion on? Link to comment Share on other sites More sharing options...
EEH Posted July 31, 2022 Share Posted July 31, 2022 I had my Trubor done when I was shooting it, with great results but no change in visibility. Link to comment Share on other sites More sharing options...
ChuckS Posted July 31, 2022 Share Posted July 31, 2022 2 hours ago, jim vaughan said: You may not have good visibility through your scope after milling the holes. Keep this in mind. He is likely talking about getting crap on the lens... Link to comment Share on other sites More sharing options...
Racinready300ex Posted August 1, 2022 Author Share Posted August 1, 2022 On 7/29/2022 at 4:41 PM, zzt said: A couple of 3/16" poppels will rob 4-5 PF from your load. Chrono after to make sure you still make PF. Thanks, I need to work up a new load anyway Link to comment Share on other sites More sharing options...
Sarge Posted August 1, 2022 Share Posted August 1, 2022 8 hours ago, ChuckS said: He is likely talking about getting crap on the lens... A qtip and lens cleaner cleans it off quite easily after shooting . Link to comment Share on other sites More sharing options...
jim vaughan Posted August 1, 2022 Share Posted August 1, 2022 Depending on what bullet, coating and powder you are using. It is somewhat difficult to go backwards after milling the popple holes. Link to comment Share on other sites More sharing options...
grujo Posted July 9, 2023 Share Posted July 9, 2023 All of my Open guns have popple holes,all shoots flat Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now