Blackstone45 Posted December 7, 2020 Share Posted December 7, 2020 The primary optic on my rifle is a Primary Arms LPVO and I have an RMR on an Arisaka offset optic mount. The Arisaka mount lets me mount the red dot at either a 35 degree or 45 degree angle. 45 degrees is the standard, but I do like the 35 degree option as it lets me maintain my cheek weld. The main issue with the 35 degree angle is that the windage turret of my scope obscures about the lower left quarter of the red dot. I'm wondering if this reduced field of view might be a problem or if it's an acceptable tradeoff. Link to comment Share on other sites More sharing options...
practical_man Posted December 8, 2020 Share Posted December 8, 2020 Only you can judge acceptability. a partially obscured view through the dot doesn’t bother me at all. you can try moving the dot rearward of the ejection port to see if that reduces the impact on your perception. Link to comment Share on other sites More sharing options...
emjbe Posted December 11, 2020 Share Posted December 11, 2020 I have the Arisaka also and mounted at 45 initially to avoid the obstruction. after 1 match I changed to 35. so I lose part of the field of view but the 35 just feels better and I don't really notice the loss on a stage with both eyes open. I see that obstruction a lot during dry fire ... but it hasn't been a problem after the buzzer goes off Link to comment Share on other sites More sharing options...
mitommy Posted December 21, 2020 Share Posted December 21, 2020 I guess it depends on how you use the RMR. My offset dot is sighted the same as my scope. My main use is for those hard /awkward leans. In those instances my cheek positioning is already off. fFor that use I find the 45 degree to be better. I’ve settled on the Midwest Industries offset mount. It puts the sight just a bit further out than most other mounts, which suits my intended use. Link to comment Share on other sites More sharing options...
poortrader Posted December 22, 2020 Share Posted December 22, 2020 It's all personal preference. Make sure you can reach on/off easy. Link to comment Share on other sites More sharing options...
inertia Posted December 23, 2020 Share Posted December 23, 2020 (edited) I run these at 35 pretty successfully. I think this mount is an advantage in open once your used to the index. Your dot and reticle are exact same height. Bigger window dots help as well. Very innovative I think. Edited December 23, 2020 by inertia Link to comment Share on other sites More sharing options...
MoRivera Posted July 20, 2021 Share Posted July 20, 2021 (edited) On 12/10/2020 at 10:54 PM, emjbe said: I have the Arisaka also and mounted at 45 initially to avoid the obstruction. after 1 match I changed to 35. so I lose part of the field of view but the 35 just feels better and I don't really notice the loss on a stage with both eyes open. I see that obstruction a lot during dry fire ... but it hasn't been a problem after the buzzer goes off I did the same. The 35 was a quicker and more natural position to snap to. I was 'searching' and having to center the dot more at 45. My LPVO has 'higher and lower' end caps for the windage/elevation because one houses an extra battery. I put the higher cap up top on elevation, and the other on the side and it just stays out of the red dot window, even though it's relatively wide (Swampfox Justice), as I have it mounted ahead of the scope instead of behind. Quote The primary optic on my rifle is a Primary Arms LPVO and I have an RMR on an Arisaka offset optic mount. The Arisaka mount lets me mount the red dot at either a 35 degree or 45 degree angle. 45 degrees is the standard, but I do like the 35 degree option as it lets me maintain my cheek weld. The main issue with the 35 degree angle is that the windage turret of my scope obscures about the lower left quarter of the red dot. I'm wondering if this reduced field of view might be a problem or if it's an acceptable tradeoff. I also have the Primary Arms LPVO. As I mentioned above, if you have one cap that is 'higher' because it houses the extra battery and it's on the side/Windage, switch it with the elevation one which is shorter. They should be the same threading. But then also as I mentioned, I have my offset red dot ahead of the scope not behind it, so that may have an obstruction either way if you have it behind/closer to your eye. Edited July 20, 2021 by MoRivera Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now