scottinohio Posted February 3, 2018 Share Posted February 3, 2018 CZ75 compact--need the best trigger-lightest but still reliable-barrel bushing-SRS-short reach-- if I left anything out please fill me in. Im sure I forgot something. LOL Link to comment Share on other sites More sharing options...
Blue Jacket Posted February 3, 2018 Share Posted February 3, 2018 I got a CGW Carry Kit for my PCR and installed it myself. Been happy with it. I didn't replace the bushing in my PCR, but I did in my SP-01 it's easy to do. Link to comment Share on other sites More sharing options...
xdr Posted February 3, 2018 Share Posted February 3, 2018 You cant miss with either CGW or CZ custom. 2 absolute pro's Link to comment Share on other sites More sharing options...
rowdyb Posted February 3, 2018 Share Posted February 3, 2018 I have used and liked CJ. http://www.cjmaven.com/ Link to comment Share on other sites More sharing options...
Chui Posted February 4, 2018 Share Posted February 4, 2018 CGW Pro Grade. My P-07 has a 8.75 lb super smooth, linear pull. Single Action is 3.75 lbs, CRISP.Reset is 2.8 mm.Just let them know it's a fighting gun not a gamer gun.The West Monroe Police Department have approved Pro Grade P-09s.Give CGW a call.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
GeneBray Posted February 4, 2018 Share Posted February 4, 2018 May want to be careful on trigger work and light pull weights for a variety of reasons. Two that come to mind are: 1) With a light pull, it is easier to discharge the pistol accidentally under the stress of the situation requiring you to draw a carry firearm, and 2) a district attorney (or the like) may press charges on you because the trigger was lightened and the only reason you did it was so you could shoot/kill someone and do it easier (a specious argument I know). An anti-gun DA can make a similar argument about JHP bullets. They are only intended to kill people and that is what you used them for. Again specious. And, a good defense lawyer can negate the argument unless the local police jurisdiction does NOT use JHP ammo, which is a rarity but some do not use JHPs. For a carry pistol, polishing to make things smoother poses little risk. Things to improve sights, reliability, and the like are not much of a risk. I suggest keep it nearly 100% stock, but ensure smooth trigger and 100% reliable. Other than that, stock for carry pistol. And, regular practice with the pistol -- at least once a month. Link to comment Share on other sites More sharing options...
Part_time_redneck Posted February 5, 2018 Share Posted February 5, 2018 I agree with Gene. I have always been advised to keep a carry gun completely stock. In the aftermath of an unfortunate situation where you have to use it to defend yourself, you can bet any modification you have made will be known and scrutinized. Everyone here understands the reliability implications, I'm just referring to the legal headache one will have to endure afterwards. By no means am I a subject matter expert on this, just the practice I follow. Sorry it's off the OP's topic but just my $0.02. Link to comment Share on other sites More sharing options...
Sliv2 Posted February 5, 2018 Share Posted February 5, 2018 Just to get OP back on topic, consult an attorney if you're concerned about legal ramifications. Link to comment Share on other sites More sharing options...
858 Posted February 5, 2018 Share Posted February 5, 2018 80s dogma lives on vicariously in the annals of the internet. Link to comment Share on other sites More sharing options...
BeltFed Posted February 5, 2018 Share Posted February 5, 2018 Go ahead and get your carry pistol slicked up, as long as it it safe and reliable. I spoke with an attorney that is a competitive shooter, and he researched to see if there was a prosecution or civil case that involved a pistol with a modified trigger. He said he could not find a case where the pistol had any thing to do with the case if the shooting was a justified use of force to begin with. In other words, it doesn't matter if your pistol is stock out of the box, or a highly modified competition pistol, a good shoot is a good shoot, and a bad shoot is a bad shoot. Link to comment Share on other sites More sharing options...
OrondoShooter Posted February 13, 2018 Share Posted February 13, 2018 I had L&M Machine do my slide for a DPP, with the rear sight milled in front of the optic for my preference setup. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now