SingingShooter Posted January 20, 2020 Share Posted January 20, 2020 Just now, ExStreetWalker said: I've got a FAT wrench so torquing the screw won't be a problem. I'll definitely use the Loctite. Thanks for the tip on the optic mounting screws. I've been following the bouncing dot on my Canik SFX for around 18 months. The dot makes me and my old eyes a better shooter. I hear ya about the eyesight. For me the reticle is just easier for me to stay locked onto with my eyesight, and improve my shot-calling accuracy. My hope is to eventually see improvement when I go back to my Colt 1911 in 45ACP. Link to comment Share on other sites More sharing options...
Jwbfx4 Posted April 23, 2020 Share Posted April 23, 2020 On 1/20/2020 at 11:22 AM, ExStreetWalker said: I didn't know this plate existed! I've got a XDM45 Competition that I really want a RDS on. I have a spare Vortex laying around. Sounds like this forum cost me money....again! Min thinking the same thing....time to make a purchase. Link to comment Share on other sites More sharing options...
ExStreetWalker Posted May 12, 2020 Share Posted May 12, 2020 I bought the plate and mounted my spare Venom. It's been awesome to have a RDS on this pistol. I'm shooting one ragged hole at 25 yards if I take my time. If I speed up I can keep them all in the 0 zone on a IPDA target head. Link to comment Share on other sites More sharing options...
Chris2010 Posted May 30, 2020 Share Posted May 30, 2020 What can I do I have the 5.25 and Nikon spur but can not find a mounting plate. Please help Link to comment Share on other sites More sharing options...
ExStreetWalker Posted June 26, 2020 Share Posted June 26, 2020 On 5/29/2020 at 11:12 PM, Chris2010 said: What can I do I have the 5.25 and Nikon spur but can not find a mounting plate. Please help Put the Nikon on something with a Pic rail and buy a red dot that will fit one of the mounting plates. Link to comment Share on other sites More sharing options...
bobert1 Posted July 25, 2020 Share Posted July 25, 2020 If anyone is having any problems with their mtg plate coming loose let me know. I had the single screw snap on two separate occasions. The lower half was loctited in the slide and something I could not get out. Sent it back to have the screw removed without damaging the slide, twice. Found a local Gunsmith that did excellent work mounting the plate with 4 screws into the slide. He left it so that if I wanted, I could remove the screws and install my rear sight for Production. Link to comment Share on other sites More sharing options...
Jeff O Posted July 27, 2022 Share Posted July 27, 2022 On 1/30/2017 at 6:08 PM, Loves2Shoot said: Yes, we have those mounts. springerprecision.com No longer? Link to comment Share on other sites More sharing options...
BritinUSA Posted July 27, 2022 Share Posted July 27, 2022 https://shop.springerprecision.com/pistol/springfield-armory/xdm/optic-mounts/ Link to comment Share on other sites More sharing options...
Jeff O Posted July 27, 2022 Share Posted July 27, 2022 7 minutes ago, BritinUSA said: https://shop.springerprecision.com/pistol/springfield-armory/xdm/optic-mounts/ But no longer for the Deltapoint Pro. Link to comment Share on other sites More sharing options...
BritinUSA Posted July 28, 2022 Share Posted July 28, 2022 Did you reach out to them ? Maybe they can do a special order. Link to comment Share on other sites More sharing options...
RJH Posted July 28, 2022 Share Posted July 28, 2022 Going off memory, they pretty much never made one for the dpp. They made one for the original delta point, but the pro apparently weighs more and the single screw isn't really strong enough. I could have some of that wrong, as it's been a while. Link to comment Share on other sites More sharing options...
Jeff O Posted December 27, 2022 Share Posted December 27, 2022 Anybody know what size screws the Springer plate takes? Link to comment Share on other sites More sharing options...
pbcaster45 Posted June 5, 2023 Share Posted June 5, 2023 (edited) My son was needing a Trijicon RMR for one of his Glocks and I was wanting to quit fiddling with batteries, so I mounted a Trijicon Dual Illuminated RMR on my XDm 5.25. I messed up the mounting screws for the RMR on the baseplate. I forgot that the Springer Precision screws are different from those supplied with the RMR. Kind of a happy accident, the new plate uses a roll pin for more support which I like. I never had problems with the original though... (+3500 rounds) Edited June 5, 2023 by pbcaster45 more info Link to comment Share on other sites More sharing options...
Joe4d Posted June 5, 2023 Share Posted June 5, 2023 is that a new plate that goes in the adjustable sight cut on the 5.25 extreme guns ? does role pin go into striker retainer area ? Link to comment Share on other sites More sharing options...
pbcaster45 Posted June 5, 2023 Share Posted June 5, 2023 (edited) It uses the roll pin hole from the original adjustable sight. Edited June 5, 2023 by pbcaster45 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now