GIO Posted July 1, 2016 Share Posted July 1, 2016 Hi All. I just purchased my first Glock (17) and would like to have Sights, Trigger and Grip work done. I know there are tons of DIY options and great info here on BE but I would rather send it out for an overhaul and get to shooting. TTI (Taran) seem to have a decent package that meets my needs but I always check the forums for advice. I am new to Glocks and I am not up to speed on the go-to products/services so I would appreciate your input. Thank you in advance! Link to comment Share on other sites More sharing options...
fishsticks Posted July 1, 2016 Share Posted July 1, 2016 TTI is good to go. I had them stipple my G17. Good communication, quick turnaround and quality work. I would use them again. Link to comment Share on other sites More sharing options...
amccallister Posted July 1, 2016 Share Posted July 1, 2016 I have a 17L that they did the full RTS package on. It turned out great, I think their stippling is the best in the business, and I really like the sights. I had mine done before the "Combat Master" slide cuts were offered, but if I were still competing with a Glock I'd probably send it back and get that done too. Link to comment Share on other sites More sharing options...
GIO Posted July 1, 2016 Author Share Posted July 1, 2016 Thanks Guys. I plan on sending it out next week. Appreciate the input Link to comment Share on other sites More sharing options...
stxbordergun Posted July 4, 2016 Share Posted July 4, 2016 You will be happy with the work and customer service from TTI. I purchased a complete g35 from them, RTS package, and it runs beautifully! Great grip, trigger is phenomanal, and sights are dead on. Within a week I had ordered a G34 to go along with it. I'm itching for a combat master now. Link to comment Share on other sites More sharing options...
jkrispies Posted July 4, 2016 Share Posted July 4, 2016 +1 Link to comment Share on other sites More sharing options...
PCKLST Posted September 19, 2016 Share Posted September 19, 2016 I purchased a complete G34 RTS package from TTI as well and could not be happier. Customer service during the process was excellent also. Highly recommend. Link to comment Share on other sites More sharing options...
nelson1each Posted September 19, 2016 Share Posted September 19, 2016 I have several glocks with TTI RTS package...best setup for a glock I have ever seen. You won't be disappointed. Can't wait to get my glock 35 back with their combat master job. Link to comment Share on other sites More sharing options...
mveto Posted September 30, 2016 Share Posted September 30, 2016 I've been looking at this package for my soon to be acquired G34, just trying to figure if I want to send it in for all the work or piece together different options...decisions are tough. Link to comment Share on other sites More sharing options...
jkrispies Posted September 30, 2016 Share Posted September 30, 2016 (edited) Mine started out as piecemeal and ended up being a pretty much full TTI. All but the sights are theirs. All I need now is the ionbond and logo, lol. I'd recommend just going TTI and getting on with your shooting afterwards. Edited September 30, 2016 by jkrispies Link to comment Share on other sites More sharing options...
Rangerdug Posted October 1, 2016 Share Posted October 1, 2016 I have the Combat Master, I absolutely love it. The only problem is the wait time.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
mveto Posted October 1, 2016 Share Posted October 1, 2016 That Combat Master is so nice, I just can't see spending 1k or more on a pistol that only cost $600 Link to comment Share on other sites More sharing options...
steven785 Posted December 29, 2016 Share Posted December 29, 2016 I have always been pleased with my tti prepped production glocks. My first one definitely helped me earn my uspsa and idpa master classification! Link to comment Share on other sites More sharing options...
Rangerdug Posted December 29, 2016 Share Posted December 29, 2016 That Combat Master is so nice, I just can't see spending 1k or more on a pistol that only cost $600Sure as helluva a lot cheaper than a 2011.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Slow250 Posted January 3, 2017 Share Posted January 3, 2017 Is there anything on a TTI that makes it custom other than the stippling? From what it looks like everything is a drop in part or cosmetic on the performance package (I believe what the ready to shred is now) other than the stippling. It's unclear whether the trigger is the drop-in GM kit or a custom massage of parts though. Thoughts/experiences? Link to comment Share on other sites More sharing options...
steven785 Posted January 3, 2017 Share Posted January 3, 2017 At this point I have had two production prepped tti glock 34s with their stippling and gunsmith trigger job and two glock 34s with their $40 drop in kit. The gunsmith trigger job does utilize their parts but it is highly massaged by their gunsmith and breaks cleaner and lighter than purely dropping in the parts. Link to comment Share on other sites More sharing options...
jkrispies Posted January 3, 2017 Share Posted January 3, 2017 11 hours ago, steven785 said: At this point I have had two production prepped tti glock 34s with their stippling and gunsmith trigger job and two glock 34s with their $40 drop in kit. The gunsmith trigger job does utilize their parts but it is highly massaged by their gunsmith and breaks cleaner and lighter than purely dropping in the parts. Yes. I'm local to TTI and can assure you that his shop's triggers are gunsmithed by the same smith that has done Taran's personal triggers for years. I'm not sure if it's true any more since his volume has gone way up recently, but Taran used to test fire each gun that went through his shop to make sure it functioned properly and the sights were right. I doubt this is possible anymore but I may be wrong. Link to comment Share on other sites More sharing options...
Slow250 Posted January 4, 2017 Share Posted January 4, 2017 17 hours ago, steven785 said: At this point I have had two production prepped tti glock 34s with their stippling and gunsmith trigger job and two glock 34s with their $40 drop in kit. The gunsmith trigger job does utilize their parts but it is highly massaged by their gunsmith and breaks cleaner and lighter than purely dropping in the parts. Cool, thanks for the insight! Link to comment Share on other sites More sharing options...
love2fishnshoot Posted January 12, 2017 Share Posted January 12, 2017 On 10/1/2016 at 8:34 AM, Rangerdug said: I have the Combat Master, I absolutely love it. The only problem is the wait time. Sent from my iPhone using Tapatalk what was the estimated wait time? I was thinking sending a g19 slide in for the combat master cut since the frame and trigger is already done up Link to comment Share on other sites More sharing options...
Mosig Posted February 28, 2017 Share Posted February 28, 2017 Seems like a lot of $$$ Link to comment Share on other sites More sharing options...
Gaucho Posted March 5, 2017 Share Posted March 5, 2017 I am also thinking of having my 17 stippled by TTI. I have seen the pics on their website but I would love to see what it looks like after running the gun a bit. Link to comment Share on other sites More sharing options...
PCKLST Posted March 6, 2017 Share Posted March 6, 2017 12 hours ago, Gaucho said: I am also thinking of having my 17 stippled by TTI. I have seen the pics on their website but I would love to see what it looks like after running the gun a bit. I haven't taken any pictures but I can say that after dozens of Steel Challenge, USPSA, and 3 Gun matches since I received my TTI G34 "RTS" the grip looks as good as the day I got it. I constantly get asked "Who did the stippling" at local matches, it really is that good. Link to comment Share on other sites More sharing options...
stxbordergun Posted March 7, 2017 Share Posted March 7, 2017 I've had my RTS 34 and 35 for almost 2 years now. Stippling is holding up great. Let me snap some pics. Link to comment Share on other sites More sharing options...
stxbordergun Posted March 7, 2017 Share Posted March 7, 2017 On 3/5/2017 at 7:53 AM, Gaucho said: I am also thinking of having my 17 stippled by TTI. I have seen the pics on their website but I would love to see what it looks like after running the gun a bit. Link to comment Share on other sites More sharing options...
Gaucho Posted March 7, 2017 Share Posted March 7, 2017 Thanks for the close up! That does look great. Would TTI's "production stipple" be like this without the undercut trigger guard? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now