Browndawg Posted May 30, 2015 Share Posted May 30, 2015 My cousin found this brass at the range. I have been reloading for over 35 yrs. and have never seen anything like this. Indent on the primer appears to have been made by a Glock. What are your thoughts on the cause of this. Mike Link to comment Share on other sites More sharing options...
peterthefish Posted May 30, 2015 Share Posted May 30, 2015 Must be reloading major PF with Clays [emoji6]. Maybe shooting .40 in a 10mm gun as otherwise proper head spacing should keep it from blowing primers out. Link to comment Share on other sites More sharing options...
jmbaccolyte Posted May 31, 2015 Share Posted May 31, 2015 (edited) Reloading for 45 years and no clue. Clays at major with 180 grain coated bullets at O.A.L. of 1.23" caused some flattening of the softist primers available, but nothing like that. That's ugly. Edited May 31, 2015 by jmbaccolyte Link to comment Share on other sites More sharing options...
noylj Posted May 31, 2015 Share Posted May 31, 2015 Measure the case head OD and compare to standard. Could be excess pressure. Could be old brass. Could be too much primer pocket "uniforming." What ever, I don't want it. Link to comment Share on other sites More sharing options...
Steve RA Posted May 31, 2015 Share Posted May 31, 2015 I've had something like that with range brass that lay around for awhile and got wet. Seems that it will make the side walls of the primer stick to the cartridge case and just the center of the primer will punch out when being deprimed. Link to comment Share on other sites More sharing options...
Intel6 Posted May 31, 2015 Share Posted May 31, 2015 It is called a ringer and we have discussed it a few times here over the years as it is not uncommon. If you search for "ringer" and my user name you will find a few threads on this. Below is a link to one of them. Neal in AZ http://www.brianenos.com/forums/index.php?showtopic=94655&hl=%2Bringer#entry2161004 Link to comment Share on other sites More sharing options...
jmbaccolyte Posted May 31, 2015 Share Posted May 31, 2015 Well, I've learned something again here. I guess I've been lucky and haven't had to pick up range brass. Pretty much I just pickup my own brass, because I spent 20 years picking up my employer's truely "once fired" brass. Link to comment Share on other sites More sharing options...
Aric Posted June 1, 2015 Share Posted June 1, 2015 I have had this issue when depriming 9mm cases. The case hangs up in the press. I assume hot loads. Link to comment Share on other sites More sharing options...
Aric Posted June 1, 2015 Share Posted June 1, 2015 I have had this issue when depriming 9mm cases. The case hangs up in the press. I assume hot loads. Link to comment Share on other sites More sharing options...
Steve RA Posted June 1, 2015 Share Posted June 1, 2015 I don't think it's hot loads, think it's corrosion between primer and case. Link to comment Share on other sites More sharing options...
jmbaccolyte Posted June 4, 2015 Share Posted June 4, 2015 Thanks, Steve. Link to comment Share on other sites More sharing options...
Aric Posted June 10, 2015 Share Posted June 10, 2015 The cases that this happens on all come from the same range. They shoot 9mm and .223. I havent had any issues depriming the rifle cases. The 9mm have been Federal and CBC head stamps. Sometimes the top pops off completely and other times it opens up like a tin can. The cases are emtremly dirty when I get them. No telling how long they have been exposed to the elements. Link to comment Share on other sites More sharing options...
SDTMatch40 Posted July 20, 2015 Share Posted July 20, 2015 I see this is a older post but I believe I know what it is from. I borrowed a friend's Dillon tool for removing military primer crimps,this is exactly what happened when you did not get the case lined up correctly. It would enlarge the primer pocket instead of resizing. Link to comment Share on other sites More sharing options...
g56 Posted August 1, 2015 Share Posted August 1, 2015 When I first started reloading in the late 1960's I didn't have a source for fired brass, this was obviously pre internet, so I ordered fired brass out of the classifieds in the back of the American Rifleman. When I got the brass and started sizing and decapping I ran into a bunch where the bottom would punch out leaving the sides of the old primer in place, there was a greenish corrosion evident in the primer pocket suggesting they had been cleaned chemically and chemical residue caused the corrosion, I have also talked to people who have found brass that might have been rained on, and the moisture combined with some residues might have caused the corrosion that caused the primer bottom to punch out. I tried a lot of different things and never did find a way to salvage that brass, I had to toss about 10% of that original order due to that problem. I have rarely seen this problem since then, I'll see one every couple of years or so. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now