davsco Posted January 20, 2015 Share Posted January 20, 2015 for anyone who has a STI steel master 9mm minor open gun (Winchester white box) or comparable gun, and also a 5"+ 38 super open gun (eg trubor or grandmaster), any input as to the recoil difference between the two? I guess I'm trying to figure out if the comp works more efficiently with the 38 super round and sucks up most of the increased power. or, with a similar comp on both guns, is the increased recoil fully proportional to the increased energy of the 38 super round? I have the steel master now and it of course works great for steel matches, but does have the scoring disadvantage in uspsa. with a 38 super open gun I'd lose the scoring disadvantage, but not sure how much it would slow me down with steel. thanks! david Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted January 20, 2015 Share Posted January 20, 2015 My TruBor works perfectly (when it's clean and well lubricated) with both 9mm major and 9mm minor loads. You might be able to pop a stiffer spring into your Steel Master, and shoot 9mm major. Then you can see the little difference between shooting minor and major. VERY LITTLE difference between 9mm major and .38 super. Link to comment Share on other sites More sharing options...
dansedgli Posted January 20, 2015 Share Posted January 20, 2015 (edited) There is no reason why you couldn't shoot minor 38 super for steel either. Edited January 20, 2015 by dansedgli Link to comment Share on other sites More sharing options...
BeerBaron Posted January 21, 2015 Share Posted January 21, 2015 yeah I actually preferred 38 super minor over 9mm minor in my stock II. could just be in my head but it felt a little nicer to shoot to me. Link to comment Share on other sites More sharing options...
ty34984 Posted January 30, 2015 Share Posted January 30, 2015 I think you pick one, make a load you like and practice until your swimming in brass to paint the steel. Everyone like 9 38 one over the other ita all up to what you feel good with Link to comment Share on other sites More sharing options...
Ming the Merciless Posted January 30, 2015 Share Posted January 30, 2015 There is no reason why you couldn't shoot minor 38 super for steel either. I prefer 38 super for steel since I can run 95gr JHP bullets. Link to comment Share on other sites More sharing options...
Hi-Power Jack Posted January 30, 2015 Share Posted January 30, 2015 you could shoot minor 38 super for steel. I prefer 38 super for steel since I can run 95gr JHP bullets. You can run 95 gr JHP's with 9mm also?? Link to comment Share on other sites More sharing options...
CocoBolo Posted January 30, 2015 Share Posted January 30, 2015 I spent a lot of time developing a shorty open gun in 9 major, at its very best it was not as shootable as a full size gun, but it was very light and easy to swing. You need to shoot about 95% of points on a stage aka shoot mostly A's major or minor, so my advice is to dry fire and shoot A's. I have guns rigged for both 38 Super and 9 major, the recoil difference at the same PF cannot be detected. I've shot matches with minor and major and my scores are about the same. I can shoot the minor a little faster but it does nothing for my movement skills, which is a major part of the game. Use your money on ammo and practice, get serious about movement sills. When you make "A" then treat yourself to a custom gun. Link to comment Share on other sites More sharing options...
kneelingatlas Posted January 31, 2015 Share Posted January 31, 2015 (edited) Use your money on ammo and practice, get serious about movement sills. When you make "A" then treat yourself to a custom gun. I GUESS you could follow this rational advice, but you COULD buy two dozen guns, shoot a different one every month and not improve much in two years like I did! ETA: I agree, the only difference between 9 and 38 is the amount you obsess over the brass. Edited January 31, 2015 by kneelingatlas Link to comment Share on other sites More sharing options...
Ming the Merciless Posted February 5, 2015 Share Posted February 5, 2015 you could shoot minor 38 super for steel. I prefer 38 super for steel since I can run 95gr JHP bullets. You can run 95 gr JHP's with 9mm also?? Not as easily as with Super. The 95gr JHP are too short to load long enough in 9mm cases to get good reliability with good case neck tension. Link to comment Share on other sites More sharing options...
Foxbat Posted February 5, 2015 Share Posted February 5, 2015 Too many variables. I have two nearly identical guns, from the same manufacturer, just about 14 months apart, in the same caliber... they have noticeable difference in felt recoil. One is very stiff, the other - soft by comparison. So I don't think you can make a valid comparison between the two calibers, as the gun's design affects it great deal. Link to comment Share on other sites More sharing options...
Ming the Merciless Posted February 6, 2015 Share Posted February 6, 2015 Too many variables. I have two nearly identical guns, from the same manufacturer, just about 14 months apart, in the same caliber... they have noticeable difference in felt recoil. One is very stiff, the other - soft by comparison. So I don't think you can make a valid comparison between the two calibers, as the gun's design affects it great deal. Tray swapping the complete mainspring housing and the firing pin stop from the soft gun to the other and vice versa. Small differences between the two make a noticeable difference in felt recoil. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now