Rdelawder Posted December 25, 2014 Share Posted December 25, 2014 I have a TS 40 on order, and while I wait for it to come in, I thought I would start stocking up on some ammo. Atlanta Arms offers remanufactored loads that make major but it's 1.180 OAL. I know these were developed for the 2011 guys, but will they run in a CZ? Link to comment Share on other sites More sharing options...
SDM Posted December 25, 2014 Share Posted December 25, 2014 No. You need a length around 1.135". Link to comment Share on other sites More sharing options...
CZ85Combat Posted December 25, 2014 Share Posted December 25, 2014 You need 1.135". I run my reloads at 1.125" Link to comment Share on other sites More sharing options...
mgardner Posted December 25, 2014 Share Posted December 25, 2014 It's unanimous 1.135. Link to comment Share on other sites More sharing options...
Smitty79 Posted December 25, 2014 Share Posted December 25, 2014 Mine are 1.15. I loaded as long as the mag will allow. When I push tested the barrel, I found that it could handle even longer. For now, I'm a production shooter so I haven't done accuracy load testing. Link to comment Share on other sites More sharing options...
Iggy42 Posted December 25, 2014 Share Posted December 25, 2014 Universal has .40 major at factory length, runs well in my XDm Link to comment Share on other sites More sharing options...
zzt Posted December 25, 2014 Share Posted December 25, 2014 I was told that if I ran 40 S&W ammo at 1.126" OAL I would never have a problem. I haven't. After reading many posts by BowenBuilt, I started loading to 1.135". I don't have a lot of 1.135" under my belt, but my preliminary conclusion is that TC bullets are better at 1.126" and RNFP are better at 1.135". YMMV. If memory serves, Atlanta sells 40 S&W in two OAL lengths. I know they do in their match ammo, but maybe no longer in their reman. I have not personally tried it, but the freebore on a TS 40 is not that long, and many have posted here stating you can't fir 1.180 OAL in the mag. Link to comment Share on other sites More sharing options...
Rdelawder Posted December 26, 2014 Author Share Posted December 26, 2014 Thanks for all the info, I'm glad I asked before making a purchase. Link to comment Share on other sites More sharing options...
gose Posted December 26, 2014 Share Posted December 26, 2014 With Montana Gold 180gr JHPs, the furthest I could go was 1.141. Dialed it down to 1.135, like everyone else, to have some margin. Link to comment Share on other sites More sharing options...
sigsauerfan Posted December 26, 2014 Share Posted December 26, 2014 i run zero 180 TCFM's at 1.135 . Link to comment Share on other sites More sharing options...
Rdelawder Posted December 27, 2014 Author Share Posted December 27, 2014 Thanks again for the input Link to comment Share on other sites More sharing options...
akeefer Posted December 27, 2014 Share Posted December 27, 2014 Mine are 1.135. Works great for the TS. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now