gynegun Posted November 13, 2014 Share Posted November 13, 2014 (edited) I need a suggestion for an offset attachment for a Bladetech holster that is legal for single stack. Suggestions? Edited November 13, 2014 by gynegun Link to comment Share on other sites More sharing options...
PatJones Posted November 13, 2014 Share Posted November 13, 2014 http://www.benstoegerproshop.com/mobile/Product.aspx?ProductCode=BSPS-Hanger Link to comment Share on other sites More sharing options...
Aircooled6racer Posted November 13, 2014 Share Posted November 13, 2014 Hello: I think I am going to try the Invictus hanger for my limited setup on a Bladetech DOH holster. I just can't seem to get the right angle with the DOH hanger. Thanks, Eric Link to comment Share on other sites More sharing options...
MikeRush Posted November 13, 2014 Share Posted November 13, 2014 I need a suggestion for an offset attachment for a Bladetech holster that is legal for single stack. Suggestions? I am going to use the BOSS for my SS rig. I confirmed that offset holster hangers are legal provided frontstrap remains above belt and gun is less than 2" from inner belt. Link to comment Share on other sites More sharing options...
zimm33 Posted November 13, 2014 Share Posted November 13, 2014 I have ordered the BOSS as well based off of many positive reviews. Just waiting for them to come back in stock! Link to comment Share on other sites More sharing options...
2MoreChains Posted November 14, 2014 Share Posted November 14, 2014 I'm currently using the BOSS hanger with a BT holster for SS. Its a great setup. Link to comment Share on other sites More sharing options...
mwx40x40 Posted November 17, 2014 Share Posted November 17, 2014 Hello: I think I am going to try the Invictus hanger for my limited setup on a Bladetech DOH holster. I just can't seem to get the right angle with the DOH hanger. Thanks, Eric I see you are talking for a Ltd DOH, but do you know if the Invictus has enough adjustment to keep the frontstrap of grip at belt level for SS requirements? Link to comment Share on other sites More sharing options...
UFO Posted November 17, 2014 Share Posted November 17, 2014 I need a suggestion for an offset attachment for a Bladetech holster that is legal for single stack. Suggestions? I went to Orchard and got (3)1/2" spacers, and longer screws. I ended up 1 3/4" out. Worked perfectly and cheap to do. Link to comment Share on other sites More sharing options...
Laughingdog Posted November 18, 2014 Share Posted November 18, 2014 I was using the BOSS for shooting production, and will be putting a Bladetech 1911 holster on the BOSS hanger now that I'm switching divisions. It's a simple hanger that doesn't move around a bit. After trying a Comp-tac dropped-offset plastic hanger, I really appreciated the complete lack of flex and drooping with the BOSS. It literally shaved 0.2-0.3 off my draw because I no longer had to deal with the gun binding up when taking out the slack from the flexing in the comp-tac hanger. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted November 18, 2014 Share Posted November 18, 2014 Hello: I will be receiving the Invictus short hanger from Shooters Connection tomorrow. I can give you the answer if it will work for a single stack then since I have a Blade Tech for my 1911 also. Thanks, Eric Link to comment Share on other sites More sharing options...
Aircooled6racer Posted November 20, 2014 Share Posted November 20, 2014 (edited) Hello: I just installed the Invictus short hanger onto my Blade Tech DOH holster. I did have to use a Blade Tech Tec Loc to get the result I was looking for. It meets the 2" rule and is lower than my DAA Racemaster. I think the Invictus short hanger and the Tec Loc would work fine for single stack on a DOH holster and be legal. I will be trying it out this weekend but so far it is faster than the standard old and new style DOH hangers I have. More stable than the new hanger also. I may try the BOSS hanger in the future if they are ever in stock. I forgot to add this is my Limited setup. Thanks, Eric Edited November 20, 2014 by Aircooled6racer Link to comment Share on other sites More sharing options...
jcc7x7 Posted November 23, 2014 Share Posted November 23, 2014 I used 3 nylon bushings to set it out about a 1/2" Much easier to get to and still under 2" from inner belt Link to comment Share on other sites More sharing options...
jcc7x7 Posted November 23, 2014 Share Posted November 23, 2014 Make sure the front strap is above the top of the belt Link to comment Share on other sites More sharing options...
Quack Posted November 24, 2014 Share Posted November 24, 2014 I have ordered the BOSS as well based off of many positive reviews. Just waiting for them to come back in stock!They are back in stock. They also have another BOSS to work with the Tek-Lok and Safariland attachments Link to comment Share on other sites More sharing options...
UFO Posted November 24, 2014 Share Posted November 24, 2014 Finally got around to taking pictures. Some of the attachments being talked about is nice stuff, but you can't beat the cost of the way I did it. TekLoc, and I adjusted it to get the proper placement of the front strap above the top of the belt. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now