Mat Price Posted January 4, 2014 Share Posted January 4, 2014 Hey guys wondering what racker would work with a cheely 90 degree set back mount. I have heard a long sidewinder bent down and back any experience Link to comment Share on other sites More sharing options...
yoshidaex Posted January 4, 2014 Share Posted January 4, 2014 You can find extra long rackers at Cheely's website Link to comment Share on other sites More sharing options...
EkuJustice Posted January 4, 2014 Share Posted January 4, 2014 Where is your slide racket cut in the gun. If it's a factory gun with a cut right behind the breech face or a built gun with it farther back makes a difference Link to comment Share on other sites More sharing options...
Mat Price Posted January 4, 2014 Author Share Posted January 4, 2014 Its right behind the breech face. In the normal postion in front of the swoop. I don't think I'm going to be able to find a way to make one fit with the set back. But i would rather the racker be on the wrong side then have a straight line of blast tar on my lens from my bbl holes Link to comment Share on other sites More sharing options...
scooterj Posted January 4, 2014 Share Posted January 4, 2014 Mat, the long Brazos Zig Racker should work for you Link to comment Share on other sites More sharing options...
EkuJustice Posted January 4, 2014 Share Posted January 4, 2014 Ran one on the right side here. The issue is the top of the racker hits the cmore it's self Link to comment Share on other sites More sharing options...
Mat Price Posted January 4, 2014 Author Share Posted January 4, 2014 Ran one on the right side here. The issue is the top of the racker hits the cmore it's selfSame issue here funny thing it's your old mount elk lolScott I got a long zig coming on my New gun have to give it a try Worst to I'll get a short cheely and hand it off the right side Link to comment Share on other sites More sharing options...
lcs Posted January 4, 2014 Share Posted January 4, 2014 Mat, the long Brazos Zig Racker should work for you Great slide racker, but it is to long. Had to shorten 1/4 . Link to comment Share on other sites More sharing options...
EkuJustice Posted January 4, 2014 Share Posted January 4, 2014 That's what I used was a cheely shorty off the right Link to comment Share on other sites More sharing options...
drglock Posted January 5, 2014 Share Posted January 5, 2014 Not the best pic but the only one I have. This is a full Cheely build with the set back 90* mount and his slide racker Link to comment Share on other sites More sharing options...
Aircooled6racer Posted January 5, 2014 Share Posted January 5, 2014 (edited) Hello: I use the Shooters Connection racker and heat it up and bend it down to clear the mount. I'll see if I can find a pic. Thanks, Eric Edited January 5, 2014 by Aircooled6racer Link to comment Share on other sites More sharing options...
andersonj55126 Posted January 27, 2014 Share Posted January 27, 2014 Hello: I use the Shooters Connection racker and heat it up and bend it down to clear the mount. I'll see if I can find a pic. Thanks, EricAfter heating and bending did you get any miss-coloring or effects to the finish? Link to comment Share on other sites More sharing options...
Shadow Posted January 27, 2014 Share Posted January 27, 2014 Its (Shooter's Connection long sidewinder) soft enough that you don't have to heat it up. I just put mine in a vise and tapped it with a plastic hammer. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted January 27, 2014 Share Posted January 27, 2014 Hello: No problem with the Shooters Connection racker and heating it up. I end up cutting them down and polishing them to look better. I would heat it up since you may crack it. They bend very easily with a little heat. Thanks, Eric Link to comment Share on other sites More sharing options...
AWLAZS Posted January 28, 2014 Share Posted January 28, 2014 Matt's xtra long should work. It bends nicely. https://www.ccgunworks.com/store/shop/long-slide-racker/ Link to comment Share on other sites More sharing options...
Iceman2733 Posted January 28, 2014 Share Posted January 28, 2014 Cheely xtra long racker works perfect with the set back without any mods. Link to comment Share on other sites More sharing options...
EkuJustice Posted January 28, 2014 Share Posted January 28, 2014 It depends on where your racker was installed. If it's on a factory gun and has to be right behind the breech face it hits the sight Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now