Jump to content
Brian Enos's Forums... Maku mozo!

Iceman2733

Classifieds
  • Posts

    216
  • Joined

  • Last visited

Everything posted by Iceman2733

  1. Iceman2733

    ZEV OZ9

    Thanks big time for the quick response, it is shocking for these firearms cost the issues that are happening and continuing to happen. I know Zev doesn't exactly market them as Duty grade but still it has glock at its roots lol
  2. Iceman2733

    ZEV OZ9

    Well I am looking to pick one of these up for a carry/range toy. Is the FTE being addressed at all by ZEV in newer production or is this an ongoing thing? Looking for some honest thoughts, I don't want to mess spending a huge amount of money and than spending more to fix things if possible lol
  3. Thank you big time, I see alot of people like that plate and I do too especially looks to be quality at a good price point. I am trying to find if anyone in the US sells so I don't have to wait a month, dang covid times
  4. Do you think the rear dovetail would like a iron sight co-witness? I e-mailed CH and was told they can't tell me if it does or doesn't to the factory front with an SRO. I didn't know P-10 plates also fit it, do they actually look correct like mill lines and such? Sorry for all the questions Thank you big time for the response! I will have to look into the short reach kit now I had read good things about them
  5. Well I am coming back from a huge break from competition shooting, picked up a Shadow 2 OR to shoot some optic class. I plan for this to be a range / comp firearm so I don't want it going straight comp build. I had a few questions hoping to get more information on, Does anyone make an RMR/SRO plate that is quality that doesn't have the rear dovetail cut? I saw CH makes one but I don't see a reason for the rear iron sight, however if not can anyone tell me if the rear sight will co-witness with the SRO with the rear sight Cajun Running an 11/11 Spring setup does it have any problems setting off factory primers on off the shelf ammo? Short Disconnectors, is there any recommended that have found to drop in? I know there isn't a 100% drop in but anyone of that are close, not needing a perfect trigger just better than factory Thank you everyone! Sorry for all the questions spent quite a bit of time searching but I am seeing information that is conflicting
  6. If i am not mistaken Fedex Home Delievery runs Tuesday-Saturday
  7. Yep I agree it seems to be the best one out there not too large but not to small, sometimes wish the huge gap wasn't isn't it but it works great. Best of all price isn't stupidly high.
  8. When I bought my edge I had them put in a tool less guide rod I asked about what recoil spring weight they instal and I was told 14lb also I don't think they mess with main spring so it should be whatever sti puts in them
  9. i have looked at a few STI guns and they sure look like the STI marked one are posi lock from the factory. Seiing how close they are to Dawson, i would not be surprised if they are made by them. Maybe Dustint21 can help out with this question. It would make sense if they added that along with the tooless guide rod. What I can't figure out is why STI hasn't updated their website to include these new models. If you want all that stuff call dawson and get the gun than ask them to add there CRP package to the gun, I really doubt STI is going to add these parts to there factory guns. Dawson however sells sti guns in which they add this stuff including there magwell too.
  10. You can use any std mount the hole pattern is the same only different is u dont use two of the holes. Most would recommend to drill the frame for the other two holes
  11. I would call sti see if will advise you on what to do, they might offer to replace it. Nothing is truely drop in in the 1911/2011 world. I wouldnt look at getting a PT or SVI grip than either if u dont want to do fitting.
  12. I would def look into a production gun like a CZ Sp01 and a nice 160gr 9mm load. They are def super soft shooting and very very easy to shoot
  13. You def need to pull the trigger out and look at it. Look for burrs with the grip, I will sometimes take a few strokes in the trigger bow channel and then lightly apply some oil to the trigger bow. Look for the bow to be straight that goes around the mags. If you don't feel comfortable send it STI or a local gunsmith.
  14. It is for sure i am asking about the right and middle oneThanks
  15. Ok so i was correct thinking they are older SVI mags?
  16. Hello everyone i recently purchased a new open gun and got a few mags with it. I was needing some help with ID for two of them. It came with what i thought was 2ea 170mm and 1ea 140mm but after closer examining only 1ea 170 and 1ea 140 and a mag in between lol I run STI and SVI newer mags but a little lost with these I dont know if they are older SVI and why the one is in between sizes. Any help would be appreicate. Thanks big time
  17. Killer looking guns, i have found a good deal on a v12 in 38 and i think i am going to pull the trigger on it. I have read about these guns being quite violent compared to 2011 open guns. What do you guys think?i was shocked to see only 7.6grs of AC making major in one of these it took around 7.4 with a 115 Haps in my gun to do it so not that much difference. Also do the guns come with any kind of optic mount i had read they do and dont so want to clarify it. Also do these guns have any weakness that causes issues?
  18. Is it just me or does the comp look like it could be the new trubor barrel from the DVC open gun?
  19. I did the same once i put thr preb disco in the gun i didnt need thr screw and just removed it completely
  20. Yeah, and why only three screws in the C-More mount?With the double sided mounts they only use 3 on one side and 2 on the other
  21. Measure the OD of the new pin and compare it to the old one. I bet the new one has a larger OD. My edge did this with one and i had to lightly sand material off of the pin.
  22. Yea i wasnt able to find it on his site i placed the order for the holster than just called and asked for him to add it on.
  23. He makes a thigh pad for the holster that bolts on the holster to stop this. I cant remember the price of it tho
  24. I think i have read .356 and with the AET barrels they do not recommend any kind of lead or plated bullets.
  25. Looks good sounds about like what we had to do to get it to fit my schuemann barrel, minus the work for the rib
×
×
  • Create New...