Z Rider Posted March 13, 2013 Share Posted March 13, 2013 Got some sm pistol magnum primers in error. If I use a few grains of powder less in my normal load would it work ok regular load is 147 Berry's over 3.2 gr Titegroup in 9mm Quote Link to comment Share on other sites More sharing options...
atbarr Posted March 13, 2013 Share Posted March 13, 2013 I've used WSPM since '08. Absolutely no problems. Quote Link to comment Share on other sites More sharing options...
Flatland Shooter Posted March 13, 2013 Share Posted March 13, 2013 Chrono to be safe. Quote Link to comment Share on other sites More sharing options...
thermobollocks Posted March 14, 2013 Share Posted March 14, 2013 I hope you mean a few tenths of a grain and not a few grains. Otherwise, bring a mallet and a brass rod Quote Link to comment Share on other sites More sharing options...
BillChunn Posted March 15, 2013 Share Posted March 15, 2013 (edited) I use Winchester Small Rifle primers. They are a little harder and do not get pierced by the firing pin. Their ignition compound burns just a slight bit hotter. BC Edited March 15, 2013 by BillChunn Quote Link to comment Share on other sites More sharing options...
kevinj308 Posted March 15, 2013 Share Posted March 15, 2013 I've interchanged magnum and regular small pistol primers quite a bit. No appreciable difference. But always be safe, drop the load a couple of tenths and chrono. Kevin Quote Link to comment Share on other sites More sharing options...
bigfish Posted March 15, 2013 Share Posted March 15, 2013 Last time there was a big ammo rush around the 08 election about the only small primers we get where small magnum pistol primers. I shot thousands of them through my .40 with no problems. Quote Link to comment Share on other sites More sharing options...
Foxbat Posted March 15, 2013 Share Posted March 15, 2013 If your gun fires them, you will not notice any difference. I didn't. Quote Link to comment Share on other sites More sharing options...
GrumpyOne Posted March 15, 2013 Share Posted March 15, 2013 All I use. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.