Steve L Posted January 26, 2013 Share Posted January 26, 2013 I almost always run LM if I aim it even knocks over angle iron. I think it was in WV I switched to full because I saw some shooters having trouble with steel falling (that was hit) on one stage. Link to comment Share on other sites More sharing options...
Solscud007 Posted February 1, 2013 Share Posted February 1, 2013 Has anyone ever considered running a Poly choke or Tru-Glock Titan? They are adjustable chokes that you can switch on the fly. Not sure about the safety aspect of twisting something at the end of your barrel with rounds in the gun. Possible self sweeping problem. But the stages I have seen rarely would one need to switch chokes during the stage. When I shot a round of 100 sporting clays, the guys I was grouped with told me that a study was done. That even with full cylinder, thre is a small central pattern of about 8 inches that never expands even out at 50 yds. The rest of the pellets will expand but not that 8 inch circle. So if you can thread the needle at 50 yds, technically it will still work. Link to comment Share on other sites More sharing options...
P.E. Kelley Posted February 1, 2013 Share Posted February 1, 2013 http://www.3gunnation.com/magazine/issue_1 Go to page 38 for shotgun load and choke info. (or just run LM and shoot) Link to comment Share on other sites More sharing options...
pjb45 Posted February 1, 2013 Share Posted February 1, 2013 I was talking with our state skeet champion (also past sporting clays) the other day. He recommended 1 oz for skeet. He said anything over 1 oz starts to produce deformed patterns because the shot hits the first forcing cone and compresses too much. Then again is compressed when it hits the choke. He has spent a lot of time at the pattern board. I usually shot 8 rounds of skeet and 1 round of 5 Stand/Sporting clays per month. I think the max distance in skeet is around 40 yards. So people are breaking little tiny birds about 4.5 inches in diameter with a skeet choke. 5 Stand is the only time I switch out my skeet choke for a tighter choke on the long distance shots BUT a much better shooter in our squad hits everything; near or far, with IC in his 1100. At RM3 and SMM3G I ran IC/skeet for most part but I am just a beginner in 3G. I did run LM for the MGM Spinnner. It was a total waste for 3 shots. I moved it on the first hit with 6 shot. For the most part I run 8-9 shot. I have heard from more experienced 3Gun/Shotgun shooters that most people over choke their guns. Link to comment Share on other sites More sharing options...
EkuJustice Posted February 1, 2013 Share Posted February 1, 2013 The 1 /8 oz dose not deform the shot and hurt the pattern by compressing . The real benefit to a 1 oz load is the deduced recoil over the 1 1/8 load and the extra shot really is not needed in the game of skeet. You will see everything from 1 1/8, 1oz and even 20 ga used for skeet in the 12 ga event. In that especially, the guys at the top tended to definitely lean toward the tighter chokes than the newer shooters. When I shot skeet and now on 3gun still go for the choke for smoke. My shoot off chokes for skeet were generally LM bottom and Mod for the top but I did have tighter I would put in as appropriate Link to comment Share on other sites More sharing options...
Aircooled6racer Posted February 1, 2013 Share Posted February 1, 2013 Hello: I am new to the shotgun world but I am learning very quickly. You need to pattern your shotgun to see where it hits. My Remington Versa Max patterns differently than my Beretta 391 sport with a Mobil barrel. The bore diameter is different on each shotgun. The Remington needs a tighter choke for the same effect than the Beretta. As they say it is better to over choke than under. The Remington likes light modified and Improved Cylinder with 7 1/2 and 1 1/8 loads. Thanks, Eric Link to comment Share on other sites More sharing options...
EkuJustice Posted February 1, 2013 Share Posted February 1, 2013 Once you get it shooting where you want you will learn more from targets than you will from a pattern board. Shoot them at different ranges with your loads to see your max range that you know 100 percent if you hit it right it will fall. The better your able to center the pattern the farther you can push it Link to comment Share on other sites More sharing options...
MarkCO Posted February 2, 2013 Share Posted February 2, 2013 Once you get it shooting where you want you will learn more from targets than you will from a pattern board. Shoot them at different ranges with your loads to see your max range that you know 100 percent if you hit it right it will fall. The better your able to center the pattern the farther you can push it Or, the less of the pattern you need, the faster you can go. Centering patterns on shotguns equals one thing...SLOW. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now